Question about 1991 Ford F150

1 Answer

No transmision at all sometime . Other times all

No transmision at all sometime . Other times all works fine.1991 f150 auto. 4.9 OD

Posted by on

  • erwinsmith23 Oct 02, 2009

    fLUID CHECKS FULL BUT ALITTLE BROWNISH TRANS WILL DISINGAGE THEN WORK FINE CHECKED ALL EXTERIOU CONNECTIONS & NO FLUID LEAKING TRUCK RUNS GREAT NO OTHER PROBLEMS ONE THING THOUGH POWER STEERING PUMP WAS ALLMOST OT OF FLUID FILLED TO SPEC NO LEAKS WHERE DID FLUID GO IS THIS RELATED SOMEHOW

  • Steven A
    Steven A May 11, 2010

    How is the fluid level/condition?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

IS IT A AUTO if so then the auto bands in the box are playing up due to the filter in the auto sump dirty or blockage ------- and if a manual then its the clutch sticking centre plate or pressure plate sticking ..

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Ford F150 won't shift into park or reverse. Will go into neutral and drive, and the linkage at the transmission moves ok


The linkage may be out of adjustment preventing the shifter from moving into reverse or park.
One way to test this is to disconnect the linkage and manually move the lever on the transmision making sure that it can be set into park. Also try moving the lever counting each click from park to low gear to make sure it is clicking into each gear. If this works then the linkage is probably out of adjustment.
On the link cable there is typically a bolt in an oval shaped metal near the transmission shift lever.
1)Detach the shift cable from the transmission shift lever
2)Put the transmision shift lever in the park position, and also the shifter in the cab
3)Loosen the adjustment bolt
4)Reattach the cable to the lever
5)Tighten the adjustment bolt in place
6)Confirm that you can shift through all of the gears
Hope this helps

Dec 01, 2013 | 1993 Ford F150 SuperCab

1 Answer

1991 Toyota Camry 4 Cyl DX auto transmission sometimes does not shift from 2nd to 3rd gear.


it has a inter damage, and you have to visit a repair transmision shop, sorry...

Aug 20, 2011 | 1991 Toyota Camry

1 Answer

TRANSMISION WONT SHIFT TO SECOND


1991 ,with an auto box thats not working?? ,do you have a local scrapyard

Jul 09, 2010 | 1991 Honda Accord

1 Answer

1995 ford auto trans slipping


I would say that the valve body probally has a crack in it need to chang trans should have a c-6 trannny

Aug 16, 2009 | 1996 Ford F150 Regular Cab

1 Answer

I have a 1991 ford f150 351w automatic with overdrive


It seems the vacuum modulator could be faulty or the throttle preasure cable has slipped and is out of adjustment.

Jul 21, 2009 | 1991 Ford F150

2 Answers

Power window on 1990 Ford F150 stops working


the motor has an armature inside that rotates.if it stops on the bad spot,it will draw alot of current.the armature has copper plates with a very fine separation between them.after a while the brushes wear the copper down and it can bridge 2 together.the motor will still run,until one brush stops right where the 2 plates meet.if you bang on it it will work too sometimes.

Jun 12, 2009 | 1991 Ford F150

2 Answers

Firing order and timing count


1991 Ford Truck F150 1/2 ton P/U 2WD 4.9L FI 6cyl Firing order 1-5-3-6-2-4 10 Degrees 1991 Ford Truck F150 1/2 ton P/U 2WD 5.8L FI Windsor 8cyl Firing order 1-3-7-2-6-5-4-8 10 Degrees 1991 Ford Truck F150 1/2 ton P/U 2WD 5.0L FI 8cyl Firing order 1-5-4-2-6-3-7-8 10 Degrees

Jun 03, 2009 | 1991 Ford F150

1 Answer

Figuring out the emission and transmision type


The stickers on the underside of the hood provide information on the engine type. If you're going to a Honda dealership, if you have the VIN they will be able to provide the correct parts.

Feb 09, 2009 | 1991 Honda Accord

1 Answer

1991 F150 front axle not locking in.


Front hubs need to be taken off and inspected for damage,
Replace as necessary.

Jan 12, 2009 | 1989 Ford F 150

Not finding what you are looking for?
1991 Ford F150 Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...