Question about 2006 Chevrolet HHR

1 Answer

How do you replace the front turn signal lights for a chevy hhr

Posted by on

  • wis_bow_hunt
    wis_bow_hunt Feb 10, 2012

    This is a task. If you look online youll see some people pretty much taking the entire front end off the car to do this. You DO NOT need to do that. You will have to turn your wheels inward, depending on what side your changing, locate the the bolts that hold the inner fenderwell liner onto the body, remove those, you will have some fast snaps as well, do not break them. Pull the liner away from the fender of the car just enough to get your hand behind the light and remove the old light and put the new one in place, You will change your head lights the same way. Hope this helps.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you change the front turn signal light on chevy hhr 2006

Posted on Sep 13, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi there, I have a 2005 Chevy Malibu 3.5L engine with an error code B3948. Does anyone know how to resolve this? Thanks!

See if the signal flashes, buy a new bulb. Some Chevy no longer use a flasher relay, the signal comes from the body computer.

B3935Transponder Authentication Error
B3948Left Front Turn Signal Circuit
B3949Right Front Turn Signal Circuit
B3950Left Rear Turn Signal Circuit

List of Diagnostic Trouble Codes for 2008 2010 HHR Chevy HHR Network

Dec 01, 2016 | 2005 Chevrolet Malibu

1 Answer

Location of turn signal flasher 2006 HHR chevy where is it located

Unlike older vehicles, the flashers on the HHR are controlled by the BCM.

If your turn signals are blinking rapidly, check the bulb connections for signs of corrosion. Clean any corroded connectors & add some dielectric grease before replacing.

Feb 13, 2015 | 2006 Chevrolet HHR

1 Answer

Changing the rear turn signal bulb

Some bulbs are really tough to remove on this car. Specially the front side lights. You have to first remove the panel in front of the tires. Hope this helps.

Apr 04, 2014 | 2007 Chevrolet HHR Fall

1 Answer

2006 hhr

Usually a problem with the multi-function turn signal switch on the column.
Someone would need to check for voltage in and out of the switch.

Sep 25, 2012 | 2008 Chevrolet Hhr

1 Answer

How do you replace a rear turn signal bulb on chevy hhr

There is an access panel on the inside rear sides by the lift gate. They pop out giving you access to the bulbs. I recommend replacing both at the same time since they seem to "blow" within a few days of each other.

May 20, 2010 | 2006 Chevrolet HHR

1 Answer

07 chevy hhr i need to change my little turn signal light that is right next to my fog light how do i get to it

This is a tough one, but the turn signal bulb (and also the headlight bulb) is accessed by opening up the inside wheel well.

You will need to turn the steering wheel hard in, then turn the car off. There are both screws and push fasteners holding the plastic inside well in place. Loosen as many as needed to bend it out of the way and you can then reach inside and replace the bulbs.

As a recommendation, you might as well replace both sides at the same time. They will both fail at about the same time.

The owners manual actually describes this process, as also gives the information on the replacement bulbs.

Feb 20, 2010 | 2008 Chevrolet Hhr

1 Answer

I have an 06 hhr, the right front turn light works but not the left, both back work

It's very likely the left front turn signal bulb is simply burnt out. Often times you can find bulb replacement instructions in the owners manual.

Nov 10, 2009 | 2006 Chevrolet HHR

1 Answer

Running lamps quit working. Have brake lights and turn signal. 2008 Chevy HHR. Checked the relay in engine compartment and it is good. Jumped out the relay and all lights worked. Is there another relay...

You Should LOOK For The MAIN Running Light GROUNG this IS your Probled, Normaly it is LOCATED ON FRAME RAIL Behind Driver Side Rear Wheel Take it off wherever you locate it and CLEAN MATING SURFACES DOWN TO BARE METAL and Remount with NEW BOLT

Sep 04, 2009 | 2008 Chevrolet Hhr

3 Answers

2006 HHR Chevy starting problem

possible low battery......... have it charged or jumpstarted

Oct 02, 2008 | 2006 Chevrolet HHR

Not finding what you are looking for?
2006 Chevrolet HHR Logo

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides