Question about 2004 GMC Envoy

1 Answer

R side brake light not working

Driver side brake light not working

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 427 Answers

Bad bulb or poor connection. Sometimes the inside of the socket corrodes, clean it up with a small emery board if there is any corrosion inside the socket. G/L

Posted on Oct 02, 2009

Testimonial: "Thank you. I will try this. Again, thank you"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

ABS LIGHT IS ON WONT GO IN TO FOUR WHEEL DRIVE


Check with a code reader or scanner, the ABS could be at fault

Mar 24, 2013 | 2005 Nissan Frontier

1 Answer

No brake lights 97 grand cherokee 5.2 litre


have you checked the relays.there is one relay in the fuse box up under the dash on the drivers side and the is other relay in the fuse box in the kick panel on the passengers side next to the blower motor. I drive a 1997 leep grand cherokee myself for work

Nov 17, 2012 | 1997 Jeep Grand Cherokee

1 Answer

Drive side brake light works when headlights are off ,but when headlights are on,it doesnt,wondering what is causing this?


There is a bad ground in your tail lamps. The brake light works with the headlamps off because the brake lamps have a good ground. When you turn on your running lights with the bad ground, they try to ground through the brake lamp circuit.

Jan 24, 2011 | 1999 Jeep Grand Cherokee

1 Answer

2005 Navigator cant get it out of park? Button on side of gear shift wont budge when I push it in to try to reverse or drive


Does the brake lights work? If so try turning key forward just a little but not so far as to turn on lights, Try to move shifter then, If it moves? The shift interlock has malfunctioned, You can use that procedure to drive the vehical, Just do that and put in neutral and start the select your gearing, That way you dont have to tow it to a repair shop.. If the brake lights do not work? Check the fuse to it, If its good replace the brake light switch

Jun 13, 2010 | 2005 Lincoln Navigator

1 Answer

1993 Nissan Pathfinder XE-V6 right-side BRAKE PROBLEMS ????


THE CLICKING NOISE IS THE SHIFTER LOCK RELEASING, NOTHING TO DO WITH BRAKE LITES. CHECK FOR GOOD GROUNDS AT REAR LIGHT SOCKETS.

Jun 17, 2009 | 1993 Nissan Pathfinder

1 Answer

Both drive lights quite working


drive lights as in day time running lights? if so, it's more then likely just the bulbs. as in headlights? sorry, can't think of anything off hand.

Mar 07, 2009 | 1999 GMC Suburban

1 Answer

Left drive lights not working


It sounds like a couple of blown bulbs. Open up the light fixture where the drive lights are found and replace the bulbs.

Nov 27, 2008 | 2005 Dodge Durango

1 Answer

Locked gearshift, no brake lights


If you are SURE that the brake light fuse is good? If so, check the brake lamp switch above the brake pedal, see if it is somehow disconnected. Check for power, at both sides of the brake fuse...and, check for poweer coming into and out of the brake switch (when pushing the brake pedal) with a 12 volt testlight. If the brake fuse is good, and you have power coming TO the brake switch, and not out of it, you need to replace the brake light switch.
OTOH, the brake switch just might need a small adjustement, too...If power is at both sides.
Note that the brake light switch ALSO powers/releases the shifter lock solenoid. You cannot take it out of park without pressing on the brake pedal.
Hope this helps you solve your problem.

Oct 07, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...