Question about BMW 330

1 Answer

Just had my back brakes,rotos and sensor changed on my 2006 330I BMW and brake light and car lift light came on. Can't get it off. Help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

Sounds like the sensor has defaulted.

Normally you would use a code reader to clear fault codes.

That is an option, but sometimes disconnecting the battery for a short period of time allows a reset of sensors upon re-connection.

If a shop did it, not a bad idea to call them and make them aware.

Plus they shouls offer to use their code reader to clear any faulty codes at no charge, being its vey likely associated with the work they just did.

If they don't, switch repair facilities.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BMW 645


you need to replace the wear sensor it will rest itself

Sep 08, 2012 | 2005 BMW 6 Series

1 Answer

Change brakes and rotos and abs light still comes on


It doesnt have to be bad brake pads to turn the ABS lite on, it can be a bad ABS wheel sensor. It would be easier if you had a scanner to tell you what sensor is bad

Feb 06, 2011 | 2004 Ford Explorer

2 Answers

Brake light stuck on. 2009 Dodge Journey. Front brakes and rotos replaced at 40,000 miles. Keyless remote still is working.


Brake light switch mounted just above your brake pedal under dash is mis-aligned and/or defective

Jan 04, 2011 | 2009 Dodge Journey

1 Answer

How do i change the brakes on my 1996, bmw 316, i have basic knowledge of changing brake shoes, but such a long time ago since i last did it, can someone please give step by step instructions and also...


first lift car make sure its properly supported. take off tires. now use pry bar to compress caliper.use allen key to take off caliper bolts. now some bmw's have brake sensors when you change pads you have to change sensors. there about 25.00 at autozone.and then reverse to put back together. remember to pump brakes before you move car.

Jul 22, 2009 | 1996 BMW 318

1 Answer

Bmw 320d e46 2001 orange brake wornin light stay on replaced brake pads and installed new sensor in front back sensor looks ok


the way to reset the brake light is to turn the key to "on" without turning the car on. Let it sit there for 15-30 seconds and the light should go off by itself. If not, double check how you have the sensors hooked up.

Jul 19, 2009 | BMW 323 Cars & Trucks

2 Answers

I have a e46 bmw the problem is


your wheyel nut arnt so tight

Jun 22, 2009 | 1994 BMW 3 Series

1 Answer

Yellow DSC and Brake light on... recently changed brake pads


Abs and dsc are related and with the light on these won't work. It is possible that you need to go back to where the work was done to look this over.

Jun 07, 2009 | 2003 BMW 325

1 Answer

Z3 brake light sensor


lay on your back in the drivers side and look up... it should be located just behind the brake pedal... move the brake pedal by hand and you should see the switch move

Mar 02, 2009 | 2001 BMW Z3

3 Answers

BRAKE WARNING LIGHT


I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....

Turn the ignition key to position 2, but do NOT start the car. Wait for about 45 seconds and the brake warning message will be reset.

If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.

Dec 19, 2008 | 2003 BMW 325

1 Answer

BRAKE WARNING LIGHT


Its not an electrical problem . . .. . When you change brakes you have to change the brake sensor as well. . . . . It just looks like a piece of wire with a sensor that clips onto the pad . . . . .Normally it is the outerpad. . . I cant tell you on witch sides its on cause it may differ from model to model.

Its not going to be a hazardous to the car the brake light will just keep burning.

If you replace the sensor and t he light does not stop burning it may be that your front brakes are also worn but remember just as at the back there is a sensor at the front.

Jun 24, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...