Question about 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

2007 300c 5.7 at time seems to go into netural by itself at 30 to 40 mph than after 5 to 10 seconds recovers

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

Sounds like you have transmission trouble, going into neutral at 30 to 40 mph sounds like it may have a second or third gear slipping.
Sorry to say you will need to take it to your dealer or an independent repair shop to have the transmission checked because there are no quick fixes

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drive cycle reset


Drive Cycle resets to reset the OBDII testing phases are very specialized to the year, model and engine of your car. So I can only speak generally. Start the car from fully cold and let it idle for about 15 minutes, then put the car into gear and drive it for about 5 minutes at 35 mph, then get on a highway and drive at about 60 mph for 15 minutes, come off the highway and drive around 40 mph for 3 minutes, come to a complete stop (like a stop sign) wait 30 seconds, drive off again up to 40 mph for 4 minutes - and repeat the last 2 steps (going up to 40 mph) about 3-5 times. Then repeat the last two steps going up to only 25 mph. Then come to a complete stop in your driveway and let the car idle for 10 minutes with the a/c on . After this is done, hook up a code scanner and see if it reset the modes to "ready".

Sep 30, 2015 | Cars & Trucks

1 Answer

Will run fine sometimes then cough and almost stall before it fires up again. it will continue to do this and cannot be driven. we have replaced the fuel system and computer


Had a bad crankshaft sensor go out while driving. Would come back in 5-10 seconds and drive fine. Everything else still worked but no throttle when it went haywire. This went on about 10 different times going about 50 mph. Ran codes at autozone that help narrow things down. It had 5-6 codes at the time. Picked that because I got lucky

Apr 06, 2015 | Cars & Trucks

2 Answers

2001 beetle 2.0 dies on freeway for a few seconds


check your timing - sounds like It skipped timing. chain or belt could be worn

Apr 19, 2013 | Cars & Trucks

1 Answer

After long drive 30,40 km when car stops on traffic lights loose power 2010 outlader


is your check engine light on it could be anything from fuel to emissions

Aug 01, 2012 | 2010 Mitsubishi Outlander

1 Answer

Obd2 system rediness status won't clear so I can run the smog test due to replacing the battery.


takes a long time to run the rediness test since there are 6 different tests to complete...

PROCEDURE 1
EVAPORATIVE EMISSION SYSTEM LEAK MONITOR
Inspection Conditions
Engine coolant temperature: 30°C (75°F) or less (The engine is stopped before the test drive is started).
Atmospheric temperature: 5 - 30°C (41 - 113°F).
Condition of A/T: Selector lever D range.
Fuel remained in fuel tank: 30 - 50% is recommended.
Time required: 16 minutes or less after started the engine.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position. Well be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start.
Accelerate until the vehicle speed is 89 km/h (55 mph) or more.
While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 89 km/h (55 mph) or more and travel for 16 minutes.
Return the vehicle to the shop, then turn the ignition switch to "LOCK" (OFF) position.

PROCEDURE 2
FUEL TRIM MONITOR
Drive Cycle Pattern
Inspection Conditions
Engine coolant temperature: 100°C (212°F) or less.
Atmospheric temperature: -10 - 60°C (14 - 140°F).
Condition of A/T: Selector lever D range.
Time required: 30 minutes or more.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position). Will be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start.
Accelerate until the vehicle speed is 89 km/h (55 mph) or more.
While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 89 km/h (55 mph) or more and travel for 30 minutes.
Return the vehicle to the shop, then turn the ignition switch to "LOCK" (OFF) position

PROCEDURE 3
CATALYTIC CONVERTER MONITOR
Drive Cycle Pattern
Inspection Conditions
Atmospheric temperature: -10°C (14°F) or more.
Condition of A/T: Selector lever D range.
Engine coolant temperature: Not set.
Time required: 16 minutes or more.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position). Will be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start.
Accelerate until the vehicle speed is 89 km/h (55 mph) or more.
Travel for 300 seconds or more while keeping the vehicle speed at 89 km/h (55 mph) or more.
Decelerate until the vehicle speed is within 80 km/h (50 mph) or less.
While traveling at 56 - 80 km/h (35 - 50 mph) for 10 minutes or more, fully close the throttle at least once in 2 minutes and decelerate for 10 seconds or more.
Do not repeat deceleration too often.
Vehicle speed may go below 56 km/h (35 mph) after the deceleration.
Stopping and braking are permitted. (If stopped or drive at 56 km/h (35 mph) or less for more than 5 minutes the monitoring may be stopped. In this case please restart monitoring from the beginning.)
After completing the above deceleration, bring the vehicle speed back to 56 - 80 km/h (35 - 50 mph) and keep it in the range until starting the deceleration again.
Repeat the above deceleration at least 5 times.
Return the vehicle to the shop, then turn the ignition switch to "LOCK" (OFF) position

PROCEDURE 4
HEATED OXYGEN SENSOR MONITOR
Drive Cycle Pattern
Inspection Conditions
Engine coolant temperature: 100°C (212°F) or more.
Atmospheric temperature: -10°C - 60°C (14 - 140°F) or more.
Condition of A/T: Selector lever D range.
Time required: 16 minutes or more.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position). Will be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start.
Accelerate until the vehicle speed is 56 - 80 km/h (35 - 50 mph).
While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 56 - 80 km/h (35 - 50 mph) and travel for 16 minutes or more.
Stopping and braking during this operation are permitted. Keep the accelerator opening degree constant for 1 minute or more after each acceleration.
Return the vehicle to the shop, then turn the ignition switch to "LOCK" (OFF) position

PROCEDURE 5
EXHAUST GAS RECIRCULATION (EGR) SYSTEM MONITOR
Drive Cycle Pattern
Inspection Conditions
Engine coolant temperature: 100°C (212°F) or less.
Atmospheric temperature: 5 - 60°C (41 - 140°F).
A/C switch: OFF.
Condition of A/T: Selector lever D range.
Time required: 16 minutes or more.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position). Will be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start.
Accelerate until the vehicle speed is 56 - 80 km/h (35 - 50 mph).
While traveling 16 minutes or more at 56 - 80 km/h (35 - 50 mph) with engine speed 2,000 r/min or above, fully close the throttle at decelerate for 5 seconds or more until the engine speed reaches 1,000 r/min or under.
Do not repeat deceleration too often.
Stopping and braking are permitted (Rapid deceleration and sharp steering are not permitted).
After completing the deceleration, bring the vehicle speed back to 56 - 80 km/h (35 - 50 mph) and keep it in the range until starting the deceleration again.
Repeat the above deceleration at least 8 times by fully closing the throttle valve.
Return the vehicle to the shop, then turn the ignition switch to "LOCK" (OFF) position

PROCEDURE 6
OTHER MONITOR (Main Components, Sensors & Switches, Wire Breakage & Short Circuit)
Drive Cycle Pattern
Inspection Conditions
Engine coolant temperature:
100°C (212°F) or less (Except engine coolant temperature sensor monitoring).
30°C (86°F) or less (Engine coolant temperature sensor monitoring).
Atmospheric temperature:
5°C (41°F) or more (Except engine coolant temperature sensor monitoring).
-10°C (14°F) or less (Engine coolant temperature sensor monitoring).
Condition of A/T: Selector lever D range.
Time required: 21 minutes or more.
Drive cycle pattern: One trip monitor (from start to ignition switch to "LOCK" (OFF) position). Will be completed while traveling with the following drive cycle pattern.
Test Procedure
Engine: start
Accelerate until the vehicle speed is 56 km/h (35 mph) or more.
While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 56 km/h (35 mph) or more and travel for 16 minutes or more.
Return the vehicle to the shop.
After stopping the vehicle, continue idling for 5 minutes, and then turn the ignition switch to the "LOCK" (OFF) position. Moreover, the vehicle should be set to the following conditions for idling.
A/C switch: OFF
Lights and all accessories: OFF
Transmission: Neutral

Sep 15, 2010 | 1998 Mitsubishi Eclipse

1 Answer

1989 audi 200 low gas mileage at 10 mph


Just a silly question...how much driving do you do that is at 10mph? Most times this is less than 5%...so if everything else is fine why be concerned? As far as the why of it, you could have a slight vacuum leak or any number of sensors that are very slightly out of range, not enough to cause a problem, but enough to change mileage expectations. The addition of ethanol to our fuel has also impacted fuel mileage...The dirty little secret about any alcohol fuel is that nearly twice the amount of alcohol is necessary in order to produce the same energy output of gasoline...which will definitely lower mileage. Some power can be "recovered" by increasing compression ratios and changing engine timing (advance)...However today's vehicles are calibrated and built to burn gasoline and cannot without, major mods, be made to use anything but. Alternative fueled vehicles make a compromise in these areas but a compromise is just that.

Apr 16, 2009 | 1989 Audi 200

1 Answer

Sporatic rpm increase at 2000 rpm (increases to 4000 by itself)


change tranny fluid with mercon v also can add friction modifier (ford part# m-19546-a) and be sure to drain torque converter as well. should fix ya

Apr 14, 2009 | Lincoln Mark VIII Cars & Trucks

4 Answers

Car "bucks" and sometimes engine dies-intermitently


as odd as this may sound its a power (electrical) problem check the battery the alternator and the cable coming off of the alternator my car does this when there is not enough current to (something?) lol.... so check all those thigs and report back

Jul 24, 2008 | 1995 Buick LeSabre

Not finding what you are looking for?
2007 Chrysler 300c AWD Sedan New Cars Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...