Question about 2009 Dodge Challenger

1 Answer

Front brakes squeling since about 1500 miles. dealer replaced all 4 rotors and pads .still doing it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Sometime with the real good brakes you need to sacrifice the quality for the noise only real way to deal with it is goin to a cheaper ceramic brake pad which probably isnt available for your car as of yet

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rear brake pads and rotors have worn out in 1 year and the front brake pads are the original and don't look worn at all. My sub has 150K miles


Its possible. There is an equalizer valve that balances pressure to the 4 wheels.
Two other possible causes are a problem with the parking brake, or the front rotors and pads are glazed and not providing any friction.

Jul 08, 2012 | 2005 Chevrolet Suburban

3 Answers

350z Rotors need to be cut at only 10K miles


Your rotors should be fine but it also depends on who turned the rotors and how they were done.Considering the dealer replaced the pads they probably used a metallic pad which have been known to be a noisy .Id suggest you have a repair shop resurface your rotors again and install some ceramic brake pads.

Jan 30, 2010 | 2005 Nissan 350Z

1 Answer

99 1500 silverado 4 wheel drive 160,000 miles brake pedal shudders intermitly, feels like the piston in the master cyl. is hanging up. All the brake lines were replced this year, I live in the rustbelt.


I would say that you have a rotor issue. The rotor is the part onto which the brake pads press and apply braking force. You may have front wheel disk brakes or all wheel disk brakes. I would take the vehicle to a reputable brake specialist and have them check the rotors for wear and a condition called "run out". If the rotors are not worn past the manufacturers specs, you can have them machined which will bring them back to true and prevent the shakes. If the rotors are worn, then replace them as worn rotors can shatter causing total loss of braking and control which can be dangerous.. Do this as soon as you can...

Dec 25, 2009 | 1999 Chevrolet Silverado 1500

3 Answers

Rear brake pads wear out every 30000 miles on 2002 3/4 tod hd , rotors are pitted bad


That's to be expected and is completely normal.

Rear brake shoes as fitted to drum brakes can typically last up to 60k miles with periodic adjustments, but you have rear disc brakes and the shoes will typically last half of that.

Also, modern brake pads no longer contain asbestos and are now made using harder metallic compounds; the direct result is that brake discs (US=rotors) are also considered to be consumable items as they are worn down by the harder pads. It's not unusual to have to replace front discs every other pad change and rear ones with every pad change; in both cases the mileage will typically be around 30k miles on most models.

Nov 15, 2009 | 2002 GMC Sierra 2500HD

3 Answers

Repeated warping of front brake rotors. Have replace rotors 3 times with both Chrysler OEM and aftermarket. Replace calipers, ceramic pads, etc. Still warps rotors in less than 5000 miles.


do you do a lot of hills work?if so use the gears ,ifdown hill not the brakes if it is auto then slip it down i gear . make sure your rear brakes are adjusted regularly,but for the main part i would think it is the driver that is the problem,you may get an occasional faulty rotor but not three sets, over heating is the cause of your problem.dont missunderstand me chrysler brakes arent anything special but they arenot that bad , slow down

Sep 29, 2009 | 1997 Dodge Ram 1500 Club Cab

5 Answers

2007 Rav 4- Front Brake pad growl during stops


I had a 2008 rav4 and within the first 10,000 I noticed this problem. Had the pads changed at 12, 22, 30, all free of charge from the dealer. Had the rotors replaced as well twice, the issue came up again & since it was a lease I threatened to sue and I was released from my term fee free. If you are having the same issue post here we need to open a dialogue. I'm sure many people have just paid for repairs without thinking it's an issue on the vehicle. Toyota will deny it until it's a media issue....

Apr 23, 2009 | 2007 Toyota RAV4

1 Answer

I have a 2008 Honda LXP purchased Novemebr 2008. It has 21000 miles on the clock. From and since 15,000 miles I heard a grinding sound when I applied the brakes after the car was stationary for over 10...


from my experience its sounds like ur front rotors may need resurfaceing...if ur doing that...may as well replace the brakes on the front as well...sometimes glazed front brake pads may make a sound but never heard of it as a grind, usually its a squeal...have ur dealer check ur rotors for hot spots in which u would need them replaced if they are overheated..also check the front pads for cracked brake pad material

Apr 09, 2009 | 2008 Honda Accord

3 Answers

325 ci brake rotors have been replaced 4 times in 6 years


BMW rotors are not known for lasting very much more than 30-45k miles. When the brakes are inspected, they measure the pads using a special tool threw the outer brake pad. Min spec is 3mm. When the pads are replaced, they measure the thickness of the rotors. The rotor spec is stamped on the rotor. if they are under that spec, they recommend replacing them as well. Next time you bring it in for service, just ask them to measure the rotor thinkness, (its not a huge task, all they have to do is take the wheels off). But more often than not, the rotors wear just as fast as the pads.

Feb 19, 2009 | 2003 BMW 325

Not finding what you are looking for?
2009 Dodge Challenger Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...