Question about 1995 Dodge Stratus

Open Question

Wipers not moving..95 Dodge Stratus

My wipers are not moving even after replacing the motor, combination switch, fuses...I don't know what else it could be. I have a 1995 Dodge Stratus.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheres the relay for the wipers on a 2006 dodge stratus


its in the engine compartment fuse panel.check for power and ground at the wiper motor

Oct 19, 2014 | 2006 Dodge Stratus

2 Answers

95 s10 4x4 wiring issues wipers don't work they


sounds like the ignition switch. usually different items go out and then work when you have a bad connection

Jul 22, 2014 | Cars & Trucks

1 Answer

I Have a 97 Ford Explorer XLT 4 door with power windows, the windows and wipers stop and start working at the same time, has anyone seenthis before?


what does that mean.
1: active window and wipers move , or reverse.
2: or i must turn on both to get either working??????
or????? be more clear. please.
all wipers move front and rear.?
and all windows do this or just one?


Shot gun effects:
and forgot to do the tests. and that meant you missed bad connections.
money to burn?
the FSM book covers this 100% read that. see those tests.
guessing works like 20% time? shot gun, 50%. leaving what?
wires and connections and bad fuses,(hair cracked)

ill look up what wire that is using alldata.com
so can you , hint?
pardon my shock but never knew folks did shot gun fixes.. wow....
pay a tech 1hr labor for him to tell you what it is ?
I know , you live in the jungle forest like me.
here we go, there. alldata.

fuse 16 runs the
here is the left front, window.
the GEM controls both wipers and windows. so , my guess
bad GEM or the inputs to it are WRONG. (basic logic 101)
be more clear on what works, here, and dont. all windows and all wipers front and rear and what this means.
at the same time

56363e00-bc37-432f-b269-26892a74ea77.jpg

Jun 24, 2014 | 2002 Dodge Stratus

1 Answer

Wipers want work on my 1995 dodge stratus


I would check the fuse and relay, then the switch for voltage.

Aug 17, 2012 | 1995 Dodge Stratus

1 Answer

Tengo un stratus 99 que esta fallando el sistema electrico


The windshield wipers don't work at all or you can hear the motor running but the wiper arms do not move?

Jul 29, 2012 | 1999 Dodge Stratus

2 Answers

Windshield wipers stopped working on a 2004 Dodge Dakota. The fuse tests good for continuity.


If the fuses are OK, then two choice to check there:
* Faulty Wiper Motor.
Check if activated switch, you have voltage in the wires wiper motor; if have voltage, then the motor is bad. If dont have voltage, then switch is bad.

* Faulty Wiper Switch.
The multi-function switch cannot be adjusted or repaired. If any function of the switch is faulty, or if the switch is damaged, the entire switch unit must be replaced.

Hope helps; keep us updated.

Dec 14, 2010 | Dodge Dakota Cars & Trucks

2 Answers

My windshield wipers (front) on a 2000 dodge grand caravan go off and on on their own. They wont work most of the time but they will just pop on on their own or if u turn the lights or high beams off and...


My best guess is the switch is bad. Did you replace it? The problem could also be the bcm, but I would test the switch first. Remove it and check it with an ohmmeter.

0996b43f80239143-xpf45b2xmdrdbg0gt251xk4c-1-0.gif

Turn Signal Switch

CAUTION
The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the air bag or SIR system wiring. Failure to do so may cause accidental deployment of the air bag, resulting in unnecessary SIR system repairs and/or personal injury.

  1. Disconnect and isolate the negative battery cable from the battery.
  2. In order to disarm the air bag system, allow the system capacitor to discharge for at least 2 minutes, before performing any removal procedures.
  3. Remove the upper and lower steering column shrouds.
  4. Disconnect the electrical connector from behind the combination switch.
  5. Remove the mounting screws securing the combination switch to the steering column adapter collar.
  6. Remove the combination switch from the vehicle.
To install:
  1. Install the combination switch to the steering column adapter collar. Tighten the combination switch mounting screws.
  2. Reconnect the electrical connector to the combination switch.
  3. Install the upper and lower steering column shrouds and tighten the retaining screws.
  4. Reconnect the negative battery cable and check all functions of the combination switch for proper operation.

0996b43f80232fdd-xpf45b2xmdrdbg0gt251xk4c-1-2.gif

Jul 25, 2017 | 2000 Dodge Caravan

3 Answers

Headlights won't work!


I had a problem like that on a Mercury Sable and it turned out to be the Multi-Function Switch. This was the whole assembly for the turn signals, hi/low beam switch, and wipers (I think). You have to remove it to test it to see if it is bad. Check out the Auto Zone web site to see if they have the test and replacement procedure. Thay may even do it in the store for you.

Jul 18, 2008 | 2004 Dodge Stratus

Not finding what you are looking for?
1995 Dodge Stratus Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...