Question about 1996 Acura Integra GS-R

1 Answer

How do you remove the axles from a 1996 integra? how do you pull them out? when i was taking of the left (drivers side axle) there seemed to a some type of mount with 2 bolts holding in the drive shaft, does that have to be removed too?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers

That sounds like the carrier bearing that goes to the axle. And yes it does need to be taken loose.

Good Luck.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the left front axle on a 1996 ford contour


remove the tire and wheel. remove the axle nut from center of hub. remove caliper. remove lower ball joint connection to spindle. pull spindle out and swing away from the axle. remove axle from transaxle

Apr 14, 2015 | 1996 Ford Contour

1 Answer

How to remove front left drive axel 2004 cadalic deville


front left is the drivers side. remove the wheel, remove the axle nut, disconnect and separate the ball joint, remove the axle from the spindle then pull the axle out of the transmission, you will loose some transmission fluid.

Feb 01, 2015 | 2004 Cadillac Deville

1 Answer

How do you change the alternator on a 1991 acura integra


From my own experience, you have to remove the driver's side drive axle just to have enough clearance to remove the alternator. Then after you do that, remove the lower bracket for the alternator. THEN you can unbolt the upper bolt and take the offending beast out. Installation is the reverse of above. Have fun, could take anywhere from 4 hours to a whole day.

Oct 06, 2012 | 1991 Acura Integra Hatchback

1 Answer

How do i get the driver side axle off?


Step by Step:

1. Remove tire
2. Remove cotter pin / lock bolt in lower ball joint
3. Remove Tie Rod End nut.
4. with a 32 mm socket removed large axle nut (air tools will most likely be required for this stage)
5. Seperate the tie rod end from knuckle
6. Seperate Lower Ball joint from knuckle
7. Pull knuckle back while pushing axle out of the bearing
8. Pull axle to the side so you have enough clearance to pull right out.
9. Pull axle out (will be stiff as there is a c-clip holding it into the transmission) take your time!. Sometimes a sticky axle can be freed from the transmission with some prying between axle and transmission.
10. Replace axle.(make sure axle is seated fully into the transmission)
11. Re install all nuts, and cotter pins.
12. Make sure you torque your axle nut to 90 ft lbs. (CRITICAL!!) - Too tight can cause premature bearing wear, Too lose and bearing could seperate, and possibly loose the tire while driving.

Mar 15, 2011 | 1998 Suzuki Esteem

1 Answer

Amilywanting to know how to change left front axle on a 1990 mercury topaz


tire off pull brake caliper,then center axle nut, pull bolts out of strut pull spindle down so axle can be pulled out of spindle, after that done take big screw driver to trans @ axle inbetween them pop axle away from transmission remove old follow reverse to install make sure new axle seats into transmission just like old one

Aug 15, 2010 | Mercury Topaz Cars & Trucks

1 Answer

I'm having problems removing left side inner axle for 1996 integra. I tried prying but not moving . Can you help me?


you got to keep prying thats how they come out. try some different pry tools some work better than others. i have found a quick **** works the best

Jun 09, 2010 | 1996 Acura Integra GS-R

2 Answers

In need of new front axle!!! HOW MUCH WILL THE $$$ BE ???


about an hours labor and the price of the axle. this is not a hard job and should be done in less than an hour unless your mechanic is ripping you off

Jan 06, 2010 | 1996 Chrysler LHS

1 Answer

Removing the front axle


I am going to assume that this is the driver's side axle you are having problems with. If so, there is a tool that is required with a slide hammer to pull this axle from this transaxle. If it is the passenger side, there is a tool that is inserted through the transaxle after the driver's side axle is removed.

Jan 23, 2009 | 1996 Ford Probe

1 Answer

Front drivers side axle removal


There's not any special tools. You need a socket to fit the nut on the end of the axle and a wrench to take the nut and bolt off the bottom ball joint that slides through the control arm. Take a bar, pry down on lower control arm, pulling ball joint out, then pull the upper part out by hand, away from the car, slide axle out of the bearing assembly. Take a pry bar, put between trans and axle, give it a swift, quick ****. The axle should come out. Remember to always put jack stands under the car and be safe. Phil

Jan 09, 2009 | 2003 Dodge Neon

1 Answer

1988 Ford Ranger


Well the passenger side axle just slides right out when pulled on. But the drivers side(the shorter axle of the two) has a clip inside the diff that you have to take out in order to get the axle out. Pulling the diff out is very easy, disconnect the front driveshaft and there is a bolt on the left side of the diff you have to take out and then the front cover bolts.
hope that helps

Aug 11, 2008 | 1988 Ford Ranger

Not finding what you are looking for?
1996 Acura Integra GS-R Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...