Question about 2000 GMC Jimmy

2 Answers

Do you need a special tool for the rad drain plug on a 01 jimmy

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 198 Answers

No there should be a drain plug passenger side at the bottom of the rad. You might be able to turn it with your hand.If not using a pair of pliers you should only have to turn it once or twice counter clockwise to open it.Make sure the radiator cap is off too.

Posted on Oct 02, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

No it should be able to be turned by hand... it is a little plastic butterfly looking thing

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drain plug radiator remover


you use your fingers to remove the drain plug from rad. turn left until the water starts to drain. you could also just remove the lower rad hose to drain.(Its much faster)

Mar 15, 2013 | 2000 GMC Jimmy

1 Answer

How to remove hyundai trajet raditor


Hello first have a drain pan under the front under rad now open drain plug drain coolant ounce drain disconnect rad hoses and transmission cool lines use a strait head screw driver now remove the the bolts you see on top of rad usually 10mm size now lift out rad replace reconnect the bolts and hoses and refill the coolant and start engine let all the air bubbles burp out ounce coolant moves and rad fans come on top up coolant close off by putting rad cap on and check transmission fluid level add if needed you have now replace your radiator.

Jan 30, 2011 | Hyundai Motor 2003 Sonata

1 Answer

Hi, I have a 2003 grand prix, I want to drain my rad and replace coolant. I got underneth my car and found drain plug on the bottom left hand side of rad (it is white plasic plug ) can anyone tell me what...


If you are changing upper and lower radiator hoses too...you can skip the drain plug...and drain by disconnecting the lower radiator hose...Your hoses are a wera item too:)

Dec 16, 2010 | 2003 Pontiac Grand Am

1 Answer

Good day to you Is there Special tools for Replacement the water pump Jimmy 1999 I need to change the water pump I can not remove the fan is there special tools ? thanks


yes, there is. I had to rent the wrench form O'reily's for $70 something $. you will get your money back when after you return the wrench.

Aug 30, 2010 | 1999 GMC Jimmy

1 Answer

Where is the engine oil drain plug on a 1998 gmc jimmy ?


i have a 96 and an 01, go under the truck from behind the drivers side front tire, the drain plug is at the back of the oil pan just behind front skid plate, the oli filter is right behind the front bumper , there is a trap door to get to the filter, but that's only for 4x4 or awd modle's, 2wd filter's are on the drivers side of the enging infront of the starter

Jun 06, 2010 | 1998 GMC Jimmy

1 Answer

WHERE IS THE FILLER PLUG ON THE GEARBOX ON A 1998 PASSAT TDI PLEASE


Hi,

Just checking.... it is a manual gearbox?

You may need a special tool for the drain plug and a 17mm allen key for the filler (some use the special drain tool for the filler as well)

The drain plug is located under the diff housing.

The filler plug is located on the left (nearside) off the gearbox (look to the left of the hole and you can see the 17mm hex filler bung).

Check you can undo the filler bung, then drain the gearbox oil.

Refit drain bung and fill gearbox through filler/level ********* until gearbox oil is up to the level of the filler bung.

Refit, test drive, check for leaks and retest level again when cold.

Cheers,

"If this has helped you in any way, please rate this solution" :-)

Jan 27, 2010 | 1998 Volkswagen Passat

3 Answers

Water in heater box on a 1999 Dodge Ram 1500 4X4 Quad cab. I can hear water rushing around in the dashboard but have no visible leaks


make sure the drain is clear, it in engine compartment agaist fire wall were heater box is located.

Oct 09, 2009 | 1999 Dodge Ram

3 Answers

Where do I add the transmission fluid? HELP We just put a trans pan on a 2003 Jag SR vin SAJEA03VX31M90957 and we do not know how to add the fluid.


it is like a lincoln LS. same trans. here is procedure. please don't forget to rate. thanks

Fluid Fill Reference NOTE: The left side of case is shown. The fill plug is on the right side of the extension housing.

4fede34.gif
Item Part Number Description 1 — Fluid fill plug (bench) 2 — Fluid level 3 — Fluid drain plug (large) 4 — Fluid level and fill plug (small) 5 — Fluid level tube
Check

  1. Place a drain pan under the transmission.
  1. NOTE: It will be necessary to hold the drain plug (larger plug) with a wrench when removing the fluid level indicator plug.
    With the transmission in the PARK position and the engine running, use a 3/16 inch Allen key to remove the fluid level indicator plug.
  1. Allow the fluid to drain. Wait approximately one minute. When the fluid comes out as a thin stream or a drip, it is at the correct level.

  1. If no fluid comes out of the hole, fluid will need to be added. Continue with this procedure.
  1. Install the special tool into the pan.
5760209.gif
  1. Using the special tool, extract approximately one pint of clean automatic transmission fluid from a suitable container.
ba2073c.gif
  1. Using the special tools, fill the transmission with clean automatic transmission fluid.
  1. Remove the special tool.
  1. Allow fluid to drain. Wait approximately one minute. when fluid comes out as a thin stream or drip, the fluid is at correct level. If no fluid drains from the plug, continue adding clean automatic transmission fluid in 1/2-pint increments until fluid starts to drain from the plug.
  1. Remove the special tool from the pan.
  1. Reinstall the fluid level indicator plug.

Aug 05, 2009 | 2003 Jaguar S-Type

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...