Question about 2003 Chevrolet Venture Passanger

2 Answers

How do I remove and change the back sparkplugs in a 2003 chevy venture, It tells me that cilinder 1 is misfiring and it won't pass the emission inspection

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you put your venture on ramps you can crawl underneath and reach the back sparkplus from there you just reach up where the exhaust pipe comes out of the manifold its pretty easy and acccesible.

Posted on Oct 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 44 Answers

You can remove the engine struts(dog bones) mounted over the top of the radiator. Use a ratchet strap, attach one end to the engine hook on the driver's side dog bone mount and the other to the radiator support. Pull the engine forward, you can then access the rear spark plugs. You have to make sure your spark plug wires and ignition coils are not corroded also.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfire rated cilinder acura mdx 2001


Acura?
both sides are missfiring
ever give it a tune up? the 60,000 mile?a
spark plugs, filters. even new COP boots?
compression all good.
fuel pressure at spec. and injector leak down pass and balance test
stated in the FSM?

Feb 26, 2014 | 2001 Acura MDX

1 Answer

1999 chevy venture transmission won't change from


I have seen where the power supply to the solenoids is failed. Check the correct wire to verify power at the transmission. The computer will indicate that it is telling the transmission which gear to be in, but the solenoids have no power and cannot actually turn on. This is limp-in mode. It is definitely a power supply issue to the trans solenoids.

Sep 19, 2013 | Cars & Trucks

1 Answer

2001 grand cherokee misfires


Contact the dealer for a possible software update to cure this issue.

Sep 10, 2012 | 2001 Jeep Grand Cherokee

1 Answer

Chevy malibu misfire


if all that is good then the only other two things it can be is a intake gasket or a head gasket

Mar 26, 2012 | Chevrolet Malibu Cars & Trucks

3 Answers

How do I change the battery on a 2003 venture


For the 03 Chevy Venture you have to do the following to replace the battery.

1. Remove the windshield whiper motor cover
2. Remove the screw retaining the underhood fuse/replay panel to the fender brace. Disconnect the cable from the negative termainal.
3. Detach the fuse/relay panel from the fender brace and move it aside. Remove the fender brace.
4 Disconnect the cable from the positive battery terminal

Jan 12, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

How many 02 sensors does a 2003 chevy venture have and where are they located. Emission error code P0135 Bank 1 Sensor 1


Hello dillonca: My name is Roger and I will help you. There should be two sensors. One in the exhaust manifold back by the firewall. This is sensor 1 bank one. The other is behind the catalytic converter. This is bank one sensor 2.
Should you need further help please just ask. Please rare your answer. This way I know the answer was helpful. Tank You for using Fix Ya. Roger

Oct 17, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

2003 chevy venture,cylinder3 misfire


Well you don't say what engine it has. I just had to put a helicoil in the head of a 3.4L 'cuz it had pulled the threads out of rocker arm bolt hole for cyl. #3. Car ran great afterward.

Jan 08, 2009 | 2003 Chevrolet Venture Passanger

2 Answers

Thermostat in a 2003 chevy venture van


the bottom boult is hard but can be done need to use a 10 or 12 stubby wrench and take a pry bar and lighty pry heat shild away to get bottom bolt dont need to take it out all the way just loosen and slide down

Aug 08, 2008 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...