Question about 2006 Suzuki Grand Vitara

1 Answer

Need to change the low beam lamp on drivers side

What is the procedure for changing the lamp?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 5,763 Answers

Go to back of lamp, unhook electrical plug, remove bulb holder by twisting counter clockwise and pull bulb out.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low beam on driver side nit working 2010 kia soul


You need to replace the lamp as the low beam filament has broken. The lamp could be a double filament lamp, high & low. Or your car has separate lamps for each beam. Either way replace lamp.

Jul 08, 2017 | 2010 Kia Soul

1 Answer

How do I clear a service emissions message on a 2005 Mercury Mariner with a 3.0L engine. I have performed the required maintenance procedures at both 30,9000090's and 60,000miles. Still have message.


Warning Messages The warning messages can interrupt the display until cleared or reset by the driver. The warning messages are either single cycle, non-resettable, or repetitive warning messages.
The single cycle warning messages display once whenever the ignition switch is turned to the ON position or a fault occurs in a system, and can be cleared by pressing the RESET button. The single cycle warning messages are:
  • liftgate ajar
  • liftgate glass ajar
  • service emission system
  • low brake fluid
  • service brake system
  • check left headlamp
  • check right headlamp
  • check left turn lamps
  • check right turn lamps
  • check left high beam
  • check right high beam
  • check brake lamps
  • check parking lamps
  • washer fluid low
  • check fuel cap
  • change oil soon
  • change oil now
  • low fuel
  • service 4x4
  • turn signal on

Jun 15, 2016 | Mercury Cars & Trucks

2 Answers

Why do all lights work except low beam driver side head lamp?


Seems like if your other low beam is lit, there's something wrong with the new bulb. Make sure it's the exact type needed, and switch the working bulb from the pass. side to drivers side to check.

Feb 22, 2016 | 2010 Nissan Altima

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

Headlamp bulb change.


Drivers side is the easier side, if your arms are small enough, can reach in, in front of battery, take the dust cover off and replace. OR, if you have monster forearms, remove the battery, then it's cake.

Feb 17, 2015 | 2003 Oldsmobile Bravada

1 Answer

The headlights on my 84 chevy pickup are not working properly. When lights are on, and set for low beam, my driver side low beam does not come on - the passenger side does. When I set the high beams,...


You have lost the ground, evidently on the left side. The lamps act that way because one of the lamps is grounding through the elements of the other lamp.

Oct 16, 2013 | Cars & Trucks

1 Answer

1998 Lincoln Town Car passenger side headlight low beam only.


Hi Steven, I guess you have checked the fuses? Some time (and I'n not saying this is your problem) the fuses are wired in such a way that if one blows (and the fuse is on the earth side of the circuit) there will be an output, but the circuit will either use the earth through the the other bulb or fail to earth. I would also suggest having a look at the relays and their operation. Lastly, check the earth connections again. Regards John

Sep 22, 2012 | 1998 Lincoln Town Car

2 Answers

My passenger side headlight does not work properly, and I cannot understand why. There are several oddities about it: 1. The bulb does not illuminate in low beams, but it works in high beams. 2. I've...


Did you check the ground wire for that light? Using your voltmeter, put the positive probe on the battery terminal and your negative lead to the pin/socket that provides ground for the lamp. If you are reading 0 volts, you need to check the ground wire for proper grounding.

Mar 24, 2017 | 2008 Chevrolet Cobalt

1 Answer

2003 GMC Drivers side head lamp


Yes there is. There is a high beam and low beam fuse for each headlamp. These fuses are located in the underhood fusebox. There is a diagram on the bottom of the cover that will help you find the fuse in question. Good Luck

Jan 18, 2009 | 2003 GMC Envoy

Not finding what you are looking for?
2006 Suzuki Grand Vitara Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...