Question about 2005 Pontiac Montana

3 Answers

Hoe do I open the hood when the cable is broken at the latch

Posted by on

  • joemastro Oct 01, 2009

    How do I open the hood when the cable is broken at the latch

  • joemastro Oct 01, 2009

    how do I open the hood when the cable is broken at the latch?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 5,763 Answers

Your gonna have to go from under car with long screw driver and push release arm or try to go from grill,garb any part of cable and pull. good luck.

Posted on Oct 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

How did you break that? If the cable is broken at the latch, as you said and others did not understand, you will have to go to a mechanic. You won't get that on your own.

Posted on Oct 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Grab the broken end inside the car with a pair of locking pliers (vise-grips ) pull until hood opens....replace cable or close hood again and drive to repair shop

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Open hood with broken hood latch cable


On hood latch..where cable goes in..there is a hole there..trip it back..or take the 3 bolts away from latch

Jul 03, 2014 | 2001 Jeep Cherokee

1 Answer

How to open hood if the cable for hood latch broken


try taking the wheel liner out on the side of the stuck latch and access the latch directly you can open it by hand if u follow the cable to lever. if you cannot access from wheel ull have to go from under the bumper as a last resort ull have to unbolt the latch while connected which can be tricky

Jan 27, 2014 | Audi A8 Cars & Trucks

1 Answer

Hood latch broken on 1990 olds cutlass supreme & cant open the hood


push down on the hood while someone pulls the cable
if not cut the cable and pull to open sounds like the cable is broken anyway

Jan 08, 2014 | Cars & Trucks

1 Answer

1998 Saab 900 SE With broken hood latch cable.


Here's a video Dan Hooper suggested as a solution to your problem from YouTube:


Opening Hood with Broken Release Cable

Apr 21, 2013 | Cars & Trucks

1 Answer

Hood latch cable on 1993 grand am is broken


theres a wire inside the cable--try to get at it somehow and pull with vise grips

Sep 02, 2012 | 2001 Pontiac Grand Am SE

1 Answer

1994 Lexus LS400 Broken Hood Cable - Hoe could I replace?


you have to route cable along the fender side under the hood like on battery side. you have to run it where it wont get in contact with drive belt.your cable has a ball of metal at the end of it.your hood latch should have a clip where you put your cable in it.you should not have to remove nothing.just drop cable in place.

May 16, 2009 | 1994 Lexus LS 400

2 Answers

2000 Chevy Blazer with Broken Hood Release. How do I open the hood


can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to open it.IF its broken at the latch itself,you are going to have to reach the latch through the grille and try to pull the lever the cable connects to.That part is no fun at all..!!

May 09, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

My hood latch is broken on my 2001 Subaru Outback. How do I manually opent the hood? I think my problem is the same. I have a 1997 Legacy--when I pop the hood, it releases, but I can't located the latch...


If the cable link to the latch is rusty or broken you have to take the front grid down. It's relatively easy. It's held there by plastic fasteners. Then reach for the latch with you hand, or the leftover broken cable. Pull it, it should release the first latch, than you just have to get to the security latch, like you usually do to open the hood.

Feb 07, 2009 | 1997 Subaru Legacy

Not finding what you are looking for?
2005 Pontiac Montana Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...