Question about Mitsubishi Pickup

1 Answer

Require cam timing marks plus all pulley marks thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 523 Answers

If the engine is a 3.0 liter V6 the cam marks are found on the cam sprockets themsselves. (look for a small mark cast in to each pulley) these marks will then align to small marks placed in the dust shield around the cam pulleys (these will be stamped in to the sheet metal dust shield, use a degreaser to clean them up a bit. As for the crank pullley there is a notch in the pulley towards the engine and a small notch cast out of the aluminum oild pump housing on the front of the motor.
The attached may assist
http://autorepair.about.com/library/faqs/bl956f.htm

I hope this may have helped,
Tom

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I need to replace the camshaft seal on a 2002 KIA optima 2.4liter 4 cylinder. Do you happen to have instructions on that? I would appreciate the help. Thank you


You need to be pretty skilled to do this job. First you need a diagram of all the timing marks for the front of the engine. You start disconnecting the battery. Remove serpentine belt and tensioner. Remove any brackets or mounts then the front engine covers. With a socket rotate the crankshaft pulley to TDC. Un tension the timing belt and remove. With a cam holder tool loosen the cam pulley retaining bolt. Remove the pulley and seal. Clean the pulley and cam surface and install the new seal. Line up all the marks and reinstall the timing belt. Rotate the engine and recheck the timing marks. Reassemble.

May 26, 2014 | Cars & Trucks

5 Answers

Intake and exhaust cam pullyes moved when timing belt was taken off, was trying to replace timing belt and I did mark pulleys myself before taking belt off. Now the pulleys will not move, theres...


The pulleys should move, take a wrench and try turning them. Most likely they are on the compression stroke and so you are just having a hard time turning them. As long as everything is off by the same number of teeth, you can put the belt back on and the tensioner on without the marks being lined up. Make sure once the tension is replaced that all of them are perfect. It took me 4 tries last time I did it on an engine, perfection is key. Let me know if you need anything else. good luck

Jul 21, 2008 | Daewoo Leganza Cars & Trucks

1 Answer

While replacing timing belt on my 2003 pt cruiser (2.4 liter) I got the belt on with the crank pulley and compression pulley (top front) in timing but exhaust pulley (top rear) off by one tooth. Took belt...


To readjust the cam timing loosen of the valve rockers so that the valves will not move as the cams are turned.. Set the crankshaft on TDC no 1 piston. This will make the mark on the crank sprocket line up with a mark on the housing. The cam shaft marks are to ne facing each other with the "up" marks facing up. Loosen of the adjuster idler and use an allen key to lever the pulley away from the belt. Fit belt and let tensioner off Ensure tensioner spring is in line with the notch. Repeat procedure to get it there.. The valves will now be timed . replace the rockers and adjust as required . The problem that you had is that there was load on the cam lobes from incorrect positioning of the cam shafts and the shaft turns until the load was equal between two lobes.. There is every possibility that there will be bent valves as it is an interference motor.

May 19, 2014 | Cars & Trucks

1 Answer

Bmw m42 engine to fit a camshaft sprocket to a camshaft


The M42 and M46 engines have the twin vanos pulleys and require locking tools to lock the crank and cam shafts inot the correct position. There are no timing marks on these as they are floating pulleys- ie they have no key locating the pulley in a specific position on the cam. Unless you make accurate marks during stripping there is very little chance you will be able to get the cam timing right on this engine without the cam locking tool kit.

Apr 25, 2014 | 1994 BMW 3 Series

1 Answer

Timing pulley marks on a renault scienic 2ltr 16valve 2004 model


The cam marks are on the cam gear or pulley, Could be a < or dot. Look for the related mark on the head. Set the crank to 0 on the timing marks

Sep 24, 2012 | Cars & Trucks

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

How to set the time belt?


4 Cylinder diesel(4JX1) :
1 - Timing mark
2 - Cam pulley
3 - HP Oil pump pulley
4 - Tensioner pulley


suzman_0.jpg

6 Cylinder petrol:
Align crank(C) timing notch mark (1) to oil pump mark.
Align cam pulley(L+R) marks(3) to cylinder head marks
The cam belt has 3 marks, 2 lines and one mark that is actually a row of dots. Align the dots to the crank pulley groove mark(2) and align the other 2 lines to the cam pulley marks. Using a clothes peg to hold the belt to the cam pulleys works wonders to keep it in place while fitting. Please note the arrows on the belt and have them point in the direction of rotation - right to left side of engine
W - water pump pulley
I - Idler pulley
T - Tensioner pulley.

If for some reason you need to realign the cams on each bank :
Standing in front of the car and starting from YOUR left , looking at the cams you should see RE, RI, LI, LE on each of the camshafts.(R for right bank, L for left bank, I for intake and E for exhaust) Right bank camshafts are marked with one dot, left bank with 2 dots on the shaft itself. To align the camshafts to each other each cam shaft gear has a mark on it. Draw an imaginary line between the centre of the camshaft and the centre of the pulley. The alignment mark should be between the two along this imaginary line. The result will be that RI an RE will be at the top of each gear. The same with the left bank.


suzman_2.jpg

Nov 08, 2010 | 1998 Isuzu Rodeo

1 Answer

Timing marks setting Hyundai Lantra


Installation
Ensure timing marks aligned [6] & [7] . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt [8] . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned [6] . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt [2] . Tightening torque: 170-180 Nm

7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top


Mar 21, 2010 | Hyundai Motor 1996 Elantra

2 Answers

How to align cams on a 95 ford contour 2.0 dohc?


In order to time this engine you've got to align the cams with the respective markings on the new belt, this also pertains to the crankshaft pulley. If there are no markings on the belt, the camshaft markings will have a demarkation on the head two which each cam must be aligned. From here I cannot tell you where thes marks are but they are usually at 12:00 or 3:00 plus when you get near the alignment point the cams will feel almost like they are freewheeling for about 3/4- 1 inch in either direction.The crankshaft has to be at TDC or topdead center. this is easily accomplised with a 12 inch ruler laid across the front of the pulley with the long side facing up. This way you can center the mounting bolt and the timing mark at the same time, assuring you of exact center alignment. That's about all I can offer. Thank you, Dana. P.S. please do not turn the engine over with the key until you are certain that all three marks are dead on target. You may however turn it over by hand using a socket of the correct size going clockwise on the crankshaft.

Sep 06, 2009 | 1995 Ford Contour

1 Answer

Timing belt marking


The timing marks are just above the cams at the "twelve o'clock position"

If necessary, align the timing marks.
NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley “I” mark and the right cam pulley on the “E” mark.

WARNING When aligning the timing marks, do not turn the timing gear counterclockwise. Damage to the engine will occur.

Oct 17, 2008 | 2000 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...