Question about 2000 Subaru Outback

Open Question

2002 Subaru Outback low beams will not work.

I have a 2002 Subaru Outback. I have replaced low beams in the past. One went out, didnt get a chance to replace and a few weeks later the second one went. Replaced the bulbs, still not working. Replaced the relays, still not working. All fuses are fine. All other lights work including high beams (seperate bulbs). I can hear the relays in fuse box under the hood click when I turn on the headlight switch so I don't think the issue is in the steering column. Any ideas?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 132 Answers

SOURCE: Low beam headlight is out, doesn't look like a fuse

Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Posted on Mar 26, 2009

Ad
Rebgagnon
  • 382 Answers

SOURCE: Need to replace a headlight assembly for a 2006 Subaru Outback.

No, you just remove the radiator grill and the side marker light and the headlight housing bolts and it comes out. Not a real hard job and is Real straight forward. Good luck and have a good day.

Posted on Mar 29, 2009

  • 383 Answers

SOURCE: 2001 subaru outback headlight not working

chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>

Posted on Apr 19, 2009

  • 9 Answers

SOURCE: 1996 ford ranger headlights not working

I had the same problem 1998 ford ranger. left headlight very dim. right head light worked normal. pull back for high beam flash left dim headlight would go out. put on high beems left light got even more dim. trouble shot wires and replaced blinker/high low beam/whiper unit didn't fix. replaced headlight didn't fix. looked at wireing harnes connecter that conects to headlight bulb and center (black Wire) female contacts was open more than the others. (was making weak contact (ground)
FIX:::: SLIGHTLY BENT BLADE ON HEADLIGHT TO MAKE BETTER CONTACT WITH WIRE CONECTION WITH WIDER FEMALE CONTACT RECPTICAL. HEADLIGHTS BRIGHT AS EVER AGAIN. PS ALSO PUT DIELECTRIC GREASE IN CONTACTOR.

HOPE THIS HELPS

Posted on Apr 27, 2009

  • 507 Answers

SOURCE: how do you change a low beam headlight bulb on an

get in behind headlight under hood and look for a central plug or screw for the headlight to remove to get to the bulb you will have to unplug the wiring to pull it out and a spring clip youll have to press in towards the centre of the globe to remove it

Posted on Nov 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left headlights


Check your connections at the wiring harness going to headlights for corrosion, sounds like high resistance somewhere, also make sure your ground wires are secure. It wouldn't be the alternator or the battery would be dead and not start the engine. Also shouldn't be any condensation in your head light assembly's or will cause bulbs to blow prematurely.

Feb 22, 2014 | 2002 Subaru Outback

2 Answers

Headlights won' turn on on a 2006 subaru outback marker lights work


2006 Subaru Liberty 3.0 Blitzen, 52,000kms. It's unbelievable, both my low beams went out at once and when I checked it was both the globes had gone at once. Never has this happened on any other vehicle before, I've ordered a HID conversion kit over the net, hope that works well.

Oct 03, 2012 | 2006 Subaru Outback

3 Answers

Left low beam is inoperative. Replaced both bulbs,


I had the same problem with my 2001 Forester. Try this as a low-cost and easy repair attempt: buy brand new fuses and replace both L/H and R/H fuses. If one of your fuses is marginal, your headlights will exhibit this problem. Replacing my headlight fuses with brand new ones solved my situation.

Jan 18, 2010 | 2002 Subaru Outback

1 Answer

Headlight low beam


Test to see if you have voltage at the bulb connector in low beam position. I'd almost bet that if there is no voltage there for the low beams that you have a bad high/low switch.

Oct 03, 2009 | 2002 Subaru Forester

1 Answer

2007 Subaru Outback wagon headlights


there are individual fuses for each side headlamps,both are 15amp located in fuse box underhood,check em out

Sep 08, 2009 | 2007 Subaru Impreza Outback Sport Wagon

3 Answers

Low beam headlight is out, doesn't look like a fuse


Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Mar 26, 2009 | 2000 Subaru Outback

2 Answers

2004 Outback: headlights stopped working.


either the headlight switch is defective or the dimmer is, it can't be anything else, do the hi beams work ok, have you tried wiggling the dimmer switch to see if the low beams flicker?

Dec 04, 2008 | 2001 Subaru Outback

Not finding what you are looking for?
2000 Subaru Outback Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...