Question about 1999 Lexus LX470

3 Answers

Brakes go down to the board - 1999 Lexus LX470

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Abs and breaks light both came at the same time and breaks went down with a beeping sound!

Posted on May 01, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 574 Answers

Sounds like you have air in the brake lines. I would bleed the brakes starting at the farthest corner from the master cylinder and work your way up. Make sure to have plenty of brake fluid cause your going to have to add as you go. I would also check for leaks, does the pedal get tight if you pump it?

Posted on Oct 01, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,036 Answers

Check condition of all pads for wear, and also fluid level in reservoir.
It could be gradual wear, air in the lines - or a failed flexi-pipe.
Make sure this is fixed as soon as possible for safety reasons.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you rewhy is my brakes locking down while driving?how do i rest the abs system?


You have water in the brake system, it boils and applies the brakes.
Different size tires will set a trouble code, but not apply brakes.

Jun 23, 2014 | 1995 Jeep Grand Cherokee

1 Answer

When accelerating the yellow triangle appears on the dash board? And when I step on the brakes it feels spongy and makes a grinding sound. The brakes are semi-new.


Semi-new??? If the pads are good and the rotors are good then I would check the caliper and while down there check the bearings as well. Spongy is usually not properly bled brake lines. Grinding is metal on metal in the caliper with pads ground down. The other main reason for grinding is a bad bearing. If this happens when you are turning one way or the other then it is the bearing.

Jan 29, 2014 | 2008 Mercedes-Benz GL 450

1 Answer

Losing power in Toyota 200 series when passing then it brakes down


no year, no joy.!!!
what does brakes down mean
car stalls
or the foot brake falls to the floor boards?
breaks are not same word as brakes.

Jan 09, 2014 | Toyota Cars & Trucks

2 Answers

How do you bleed the brakes on a 1996 pontiac sunfire se


right rear,left rear,right front,left front wheels.

Jan 19, 2011 | 1996 Pontiac Sunfire

3 Answers

How brakes work


the brakes slows the movement of the car then the trans and engine slows with that I guess you know you have brakes on all 4 wheels by braking you are slowing down the wheels

Apr 16, 2010 | 1999 Dodge Intrepid

1 Answer

Brakes engaging without pressing the pedal


this is a simple job of adjusting the rod on the end of the servo that pushes the master cylinder .remove master cylinder and with help push the brake pedal down and then screw the end of the shaft in a mm or so .This will cure your problem.

Sep 01, 2009 | 2005 Ford Five Hundred

1 Answer

2001 Dodge Caravan brake light on on dash board, hear clicking no


sounds like the indicators on brake pads are exposed telling you to change the brakes.

Apr 09, 2009 | 2001 Dodge Caravan

1 Answer

No brakes


hi
First your car want to check brake system.
1-check your bads and disck , or drums.
2-check your brake pipes and leak
3- check the brake master cylinder
4- check brake booster or brake assistant, you can check aply the brake after start the engine your feet brake will go down if not this is not working it is makes leak so change the booster. remove the brake master cylinder after you can loose four bolts under the dush boad.

Nov 28, 2008 | 1991 Volvo 240

Not finding what you are looking for?
1999 Lexus LX470 Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...