Question about Oldsmobile Intrigue

1 Answer

2000 olds intrigue, when idling and coming to stops the car has a tendancy to bog down and even kill sometimes. Maf sensor and crank position sensor already changed out. what could be causing this.

Posted by on

  • onewingfreak Oct 01, 2009

    so could that be causing bad feul mileage as well?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 76,649 Answers

Do this procedure it works
Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 acura integra it will crank sometimes, and when i drive it the car bogs down and cuts off will not crank untill it sits for awhile


Sounds like a Vapor Lock, check and see if the fuel line is exposed to the exhaust manifold heat any where. If not that it could be the fuel filter or trash in tank is being sucked up and stopping up your fuel line. Also sometimes the MAF Sensor can go crazy and cause all kinds of problems. You need to have Auto Zone to put it on a Computer and run a diagnostic test on it. Had a friend who rebuilt a wrecked Mustang and it would start and run a few seconds and then go dead. I helped him for a half day and we couldn\'t find the problem. Finally he pulled the intake off from the filter and a Wasp nest that had fallen down was being sucked against the MAF sensor and killing the engine. When the engine stopped it would fall off and let the engine start then suck it back up and kill the engine!

I wouldn\'t think you have a Wasp nest problem but crazy things happen.

Col. Dana Gillespie

May 04, 2014 | Acura Integra Cars & Trucks

1 Answer

92 jeep wrangler 4 cyl 5 speed skipping and bogging down idling rough replaced fuel pump/filter injector o rings fuel pressure regulator timing chain distributor plugs wires map sensor crank sensor idle...


Have you checked the cam sensor? Also does that vehicle have a "throttle position sensor"? Some cars use both MAP and MAF sensors, not sure about your particular vehicle but if it is one of those, cleaning the MAF wouldn't hurt. Good luck.

Jun 28, 2012 | Cars & Trucks

2 Answers

Driving down the road the car will shut off 1998 Olds Intrigue. Sometimes it will start right back up. Other times it has to set for awhile like to cool down or something. Other times it will not start...


Next time this happens, check to see if the SECURITY light shows up on the dash. The security that comes on that vehicle can actually kill the motor if its not comminicating properly.

If there is a light, check out this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

Apr 17, 2011 | 1998 Oldsmobile Intrigue

2 Answers

Where is the crankshaft position sensor located on a 2000 intrigu


Should be located around 11:00 on front of engine at crank pully.

Oct 28, 2009 | 2000 Oldsmobile Intrigue

2 Answers

I have a 2000 olds intrigue. It stahls out while


unplug the torque converter clutch it will run fine without it and should cure your concerns

Aug 20, 2009 | 1990 Chevrolet Lumina

1 Answer

CLEANING THE MAF SENSOR ON MY '99 INTRIGUE


You don't clean them, you get a new one. Usually if it's the MAF, it'll start and die, start and die. If your's is stalling, it'll be the idle air control valve, or the fuel filter, or the idle control system, or a vacuum leak at the intake or vacuum hoses. Good luck.

May 06, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Car is stalling and idleing irradically.


I Would Suggest That You Complete A Engine Cylinder Leak Down Test.....(not A Compression Test But A Leak Down Test) this will tell you if you have internal problems....possible worn rings or a burnt valve(s) I would use a smoke machine to check for vacuum leaks also. Good Luck

Mar 24, 2009 | 1994 Volvo 850

1 Answer

Cranking but won't start without hitting gas


run the fault codes
check for problem MAF?VAF sensor and accelerator position sensor

Jun 17, 2017 | 1997 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...