Question about 1996 GMC Jimmy

1 Answer

1996 GMC Jimmy will not shift in to first unless it has sat for a cupple hours

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 145 Answers

You'll have to connect the vehicle to a scanner and read the pressures @ the pressure control solenoid and the 1-2 shift solenoid to narrow down the problem.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 GMC jimmy will only start in drive position


Ever considered checking out the
neutral safety switch or shift linkage ?

Oct 02, 2014 | 1996 GMC Jimmy

1 Answer

I have a 1996 GMC JIMMY tranny only has 1st and 2nd no drive or overdriver is their a easy fix


So it shifts from 2nd to Neutral? Sorry its not going to be and easy fix. Sounds like you burnt the 3/4 clutch.

Jan 13, 2011 | 1996 GMC Jimmy

1 Answer

1996 GMC Jimmy will not shift into overdrive.


4th gear failure is a common problem with this transmission, assuming it is an automatic. You should have the vehicle checked for codes by a qualified repair center with the proper scan tool. Also, check fluid level and condition. More often than not, the trans loses 3rd and 4th gear, as these are working off the same set of clutches. 3-4 clutches apply in 3rd, and when the 4th shift is made the 2-4 band applies giving you overdrive. If you have no engine braking in manual 3rd, you definitely have a mechanical failure, no 4th could be an electrical, or mechanical fault.

Nov 18, 2009 | 1996 GMC Jimmy

1 Answer

1995 gmc jimmy-won't accelerate wants to stall


could be the fuel pump ...you will need to do a fuel pressure test on it ..the pressure should be 63 anything lower even so much as a few lbs will cause this to happen ...as well if it sat that long i would consider a complete tune up and check all vacuum lines for dry-rot


Sep 14, 2009 | 1995 GMC Jimmy

1 Answer

1996 gmc jimmy wont shift into park stops at neutral its a manual tansmission


a manual transmission don't have park i am assuming you have a automatic trans in vehicle and maybe the park interlock is not working properly check fuses 1st

Sep 08, 2009 | 1996 GMC Jimmy

1 Answer

No reverse and shifts hard if forward gears


best bet is call scrap yard they are fairly decent priced unless you want new

Aug 25, 2009 | 1996 GMC Jimmy

2 Answers

1996 Jimmy won't shift out of 2nd


Had the same problem with it not shifting passed second and slipping in and out. one of the PCM modules (there are 2) isn't grounding properly. gmc dealer jumped a wire from the properly grounded PCM module to the un-grounded one. problem solved. this after i spent money on a re-manufactured tranny at there suggestion. But i got my money back because there exists a technical service bulletin on this issue and i complained to them that they should have known about it beforehand, so i got a re-manned tranny with warranty for free, not bad, thanks GM. Jimmy's still running....

Aug 19, 2009 | 1996 GMC Jimmy

Not finding what you are looking for?
1996 GMC Jimmy Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...