How to remove 2001 hyndai sonata audio system

Instructions
Things You'll Need:

• Screwdrivers
• Wiring harness adaptor
• Hyundai radio adaptor kit

1. Open the coin holder and remove the two screws at the front. Pry the trim from around the gearshift lever and unhook the power wire to the cigarette lighter.
   
2. Locate and remove the two screws from the bottom of the radio trim panel. Look for the screws, attached to a rod, below the glove box. Unhook the cable from the rod and pull the rod free.
   
3. Place the shifter into "D" and slide the radio trim panel away from the dash. Locate the four screws at the front and sides of the stereo and remove them.
   
4. Pull the stereo out of the Hyundai Sonata dash and disconnect the wires from the back of the unit. Connect the wiring harness adaptor to the original harness.
   
5. Slide the new head unit into the Hyundai radio adaptor kit. Attach the wiring harness adaptor and antenna wire to the back of the new head unit and push the entire assembly into the dash.
   
6. Secure the stereo in place with the four front and side screws and turn it on. Verify all of the speakers and features are working. Reattach the radio trim panel, insert the rod back into cable assembly and secure the trim around the gear shift.
   

In here you can find tips about remove radio...
- Hyundai Car Stereo removal
- Stereo Removal Hyundai (buy)

I really hope help you with this (remember rated this help). Good luck.

HAVE YOU TRYED TAKING OFF THE PLASTIC TRIM PANAL THAT GOES AROUND THE RADIO BECAREFUL THERE MITE BE SOME SCREWS TO TAKE OUT. ALL MAKE SURE YOUR CAR DOESNT HAVE A ANTI-THEFT RADIO IF SO MAKE SURE YOU HAVE THE CODE BECAUSE IF YOU UNPLUG IT AND REINSTALL IT WILL NOT WORK WITH OUT THE CODE. WHEN YOU GET THE COVER OFF THERE SOULD BE TWO OR FOUR SCREWS HOLDING THE UNIT IN.