Question about 2000 Ford Expedition

1 Answer

Ignition won't shut off. Where is the fuel pump fuse located. I don't have an owners manuel. Lyle Modesto, Ca

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Is the ignition switch broken?you can pull the computer relay's in the power distribution box in the engine compartment to stop the motor.(black relay)there is a few,pull out one at a time until the engine quits.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 f-250 inertia fuel shut-off switch switch location


This should be in the owner's manual. I found the below on autozone.com, their repair help location:
An inertia switch is used as a safety device in the fuel system. The inertia switch is located in the cab, generally under the dashboard on the right side. It is designed to open the fuel pump power circuit in the event of a collision. The switch is reset by pushing each of 2 buttons on the switch simultaneously (some models use switches with only one reset button). The inertia switch should not be reset until the fuel system has been inspected for damage or leaks.
When the ignition switch is ON , it turns the EEC power relay ON . The EEC power relay provides power to the powertrain control module (PCM) and the control side of the fuel pump relay. Power for the fuel pump(s) is supplied through a fuse link or high current fuse attached to the starter solenoid (battery side). From the fuse link or high current fuse, current flows through the fuel pump relay and inertia switch to the fuel pump(s). The fuel pump relay is controlled by the PCM.
When the ignition switch is turned ON , the fuel pump(s) will operate. If the ignition switch is not turned to the START position the PCM will shut the fuel pump(s) OFF after 1 second. The PCM will operate the fuel pump(s) operate the fuel pump(s) when the ignition switch is turn to START position to provide fuel while cranking.
After the engine starts, the PCM will continue to operate the fuel pump(s) unless the engine stops, drops below 120 rpm or the inertia switch is tripped.

Dec 28, 2013 | 1989 Ford F 250

1 Answer

Dodge dakota fuel shut off


Well there is no shut-off fuse, but there is a 20amp fuse that powers the auto shutdown relay and the fuel pump relay.
It should be in the fuse box in the engine compartment, and the location should be in your owners manual.

Apr 26, 2013 | Cars & Trucks

2 Answers

Cant get fuel pump to work


There is also a fuse and a relay, both under the hood. You'll need your owners manual to find the locations (or web search). These cars are also common for bad fuel pumps. You should check for power at the connector near the fuel tank. It only primes for 2-5 seconds when you turn the key on, you will need an assistant to cylce the key. Wait 10 seconds between ignition cycles. The switch in the trunk is an inertia switch that usually only trips under hard impact, like an accident. They can go bad, but it's rare.

Dec 04, 2012 | 1999 Ford Taurus

1 Answer

I WAS INSTALLING A RADIO AND TOUCHED A HOTWIRE THAT WAS RUNNING TO MY FUSE PANEL, ATTACHED TO THE FUEL PUMP FUSE. MY TRUCK SHUT OFF. NOW IT WILL NOT MAKE A SOUND AND WON'T START. ALL OF THE LIGHTS WILL...


Check your fusible links (wires that act like a fuse). The fusible links are located on the battery post on the starter, and some are located on the positive battery cable.

Jun 18, 2011 | 2004 GMC Envoy

1 Answer

1994 gmc surburban turns over fine but engine won't start


You can check to see if the fuel pump is bad..Remove gas cap and listen into tank while another person turns key on.If you here a buzzing noise the fuel pump is most likely OK...If you don't here anything Check owners manual for fuse location and check to see if there are any blown..There is also a fuel relay fuse under the hood

Jun 11, 2011 | 1994 GMC Suburban

2 Answers

Car wont start was running fine now just wont start 2000 chrysler concorde. it seems like it wants to fire but not getting fuel or something


i would turn on the ignition while listening under the back of the car and you should hear a buzzing from the fuel pump. if you dont hear it then either your fuel pump is bad or you blew a fuse or sometimes you can trip the fuel safety shut of switch that should be located in owners manuel

Apr 27, 2011 | 2000 Chrysler Concorde

2 Answers

I have a 99 ford expedition and my fuel pump stop pumping Trying to find the fuel pump fuse do not have owners manuel Where is the fuel pump fuse


Here is the manual
FUEL PUMP SHUT-OFF SWITCH After a collision, if the engine cranks but does not start, the fuel pump shut-off switch may have been activated. The "Fuel Reset" indicator light will illuminate in the instrument cluster. The shut-off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in the reset button. 4. Turn the ignition to the ON position. Pause for a few seconds and return the key to the OFF position. 5. Make a further check for leaks in the fuel system.
The fuel pump shut-off switch is located in the passenger's foot well, behind the kick panel.

Mar 08, 2011 | 1999 Ford Expedition

2 Answers

Fuel Pump is not activating when ignition switch is turned, I can hear the clicks in the relay box. Does this mean the relay went bad?


Not usually, when you hear clicks it means the relay is switching. Its probably the fuel pump that needs attention.

Nov 19, 2009 | 2001 Mercury Sable

1 Answer

Fuel pump not running


Fuel Pump suse location #14 20Amp Relay box located on left side in engine compartment the location is marked on the fuse box, fuel pump relay is #1 on the same box if the relay has electrical power then go to the pump located inside the fuel tank.

Mar 17, 2009 | 1999 Lincoln Town Car

Not finding what you are looking for?
2000 Ford Expedition Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...