Question about Plymouth Voyager
Www.autozone.com has manuals online with the wiring diagrams. Signup is free. When you're signed up register your voyager and any other cars you have and you're on the way to a pretty good selection of manuals.
Posted on Oct 19, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Go to the autozone website at autozone.com and register your vehicle. It's free and you will have access to a full online repair manual for your vehicle. Hope this helped and best wishes.
Posted on Jul 28, 2009
Here's a link to the diagram you need...
Good luck and please rate this solution. Thanks.
Posted on Oct 17, 2009
Testimonial: "Looks good."
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
Posted on Feb 08, 2010
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..
Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.
I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..
Posted on Jun 02, 2010
Tips for a great answer:
Nov 28, 2015 | Plymouth Cars & Trucks
Jul 16, 2014 | 1995 Plymouth Voyager
Sep 30, 2013 | Cars & Trucks
Sep 26, 2012 | Cars & Trucks
Sep 17, 2011 | Plymouth Voyager Cars & Trucks
Jun 09, 2011 | Plymouth Voyager Cars & Trucks
Sep 14, 2009 | 1995 Plymouth Voyager
May 11, 2009 | 1994 Plymouth Voyager
Dec 24, 2008 | 1995 Plymouth Voyager
Jul 15, 2018 | Plymouth Cars & Trucks
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: