Question about 2002 Dodge Intrepid

1 Answer

Engine light is on...

I have chrysler 2002 intrepid and the engine light is on and i let the guy check it and it says it has problem with p0152 p0137 p0300 p0139. what are they and what should i do. should i replace them???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

P0137--O2 Sensor Circuit Low Voltage-Bank 1 Sensor 2

P0139--O2 Sensor Circuit Slow Response-Bank 1 Sensor 2

P0152--O2 Sensor Circuit High Voltage-Bank 2 Sensor 1

P0300--Random Multiple Cylinder Misfire


I would suspect that the camshaft position sensor is bad. This is a quote from the tech manual:

The Powertrain Control Module (PCM) uses the camshaft position sensor to manage sequential fuel injection and as part of misfire diagnosis. The PCM constantly monitors the number of pulses on the signal circuit. The PCM compares the number of camshaft sensor reference pulses and the number of crankshaft position sensor reference pulses received. If the PCM receives an incorrect number of pulses, Diagnostic Trouble Codes (DTCs) should be stored in the PCM. Some PCM systems will then default to multi-port or "gang-fire" injector operation. The camshaft position sensor signal is required to sequence the injector operation to the proper cylinder timing. If the camshaft position sensor or circuit is faulty, most engines will start. However, the PCM misfire diagnostic will likely be affected.

engine light is on... - aa26193.jpg
5ac44c6.gif
The part costs $50.....simple to change. It is NOT the O2 sensors so don't go wasting money on those. They are being affected due to related symptoms....they fault because the problem is happening upstream.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix codes p0152 and p1564 on a 2002 maxima se


p0152 is bank 2 sensor 1 oxygen sensor code...make sure it was plugged back in or sensor may need replacement or you may have damaged the harness. p1564 is for the automatic speed control device basically the same possibilities with this circuit.

Feb 22, 2017 | 2002 Nissan Maxima SE

2 Answers

Where is bank 1 sensor 2 located at on 2003 dodge stratus wit a 2.4 engine ?


    Dodge Chrysler - YouTube

    ? 2:54
    https://www.youtube.com/watch?v=vs2DuvehVGA
    Oct 31, 2013 - Uploaded by 1A Auto Parts
    I want to know about a Dodge Stratus 2002 sensor. ... I have a 05 Chrysler 300 2.7 engine with a fault code ... images for Where is bank 1 sensor 2 located at on ...


    More images for Where is bank 1 sensor 2 located at on 2003 dodge stratus with a 2.4 engine

    Where is bank 1 sensor 2 located at on 2003 dodge stratus wit

    www.fixya.com/cars/t26025690-bank_1_sensor_2_located_2003_dodge
    22 mins ago - SOURCE: check engine light is on...bank 1 sensor1 oxygen sensor. if u have one .... 2.7L dodge stratus/ #1 bank #2 sensor location? on 2004 Stratus. Oct 24 ... How can I set the timing on a 1996 dodge stratus 2.4l engine.

    P0137 02 Sensor Circuit Low Voltage - OBD-Codes.com


Dec 28, 2015 | Dodge Cars & Trucks

1 Answer

Engine Code # P 0137


P0137....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 2)

you have a faulty or bad connection on the sensor after the cat on bank 1 whichever side that is as i do not know and my alldata book only covers europeon models ,sorry

Mar 05, 2011 | 2002 Dodge Intrepid

1 Answer

Code p0152


CODE PO152 UPSTREAM HEATED 02 SENSOR CIRCUIT FAULT BANK 2 POSSIBLE CAUSE WIRING SHORT TO POSITIVE OR FAULTY O2 SENSOR.

Dec 11, 2010 | 2002 Dodge Intrepid

1 Answer

2002 dodge intrepid se 2.7 engine light on got


Anytime a Chrysler product of this year has a check engine light, get it to a dealer immediately. The 2.7 liter engine is notorious for oil sludging. This can be a dangerous problem that can destroy the engine.

Your problem may have nothing to do with oil sludging, and I hope it doesn't; but don't take a chance.

Google "Chrysler engine oil sludging."

Oct 20, 2009 | 2002 Dodge Intrepid

1 Answer

The oil light comes on at low rpms but goes off when engine reaches 1500 rpm on a 2002 Dodge intrepid


I would get to a Dodge dealer as quickly as possible.

As I recall, these years in the Chrysler products were very prone to a condition called "oil sludging." This can lead to a seized engine, which can lead to a $3,000-4,000 engine replacement. The oil light might indicate low oil pressure, which could be related to plugged oil passages as a consequence of the sludging.

Dodge has paid for replacement engines for a lot of cars from the early 2000's; however, the car owner has to be persistent.

Check Google for "Chrysler engine oil sludging." You will get a real education on the subject.

Oct 11, 2009 | 2002 Dodge Intrepid

3 Answers

Trouble codes and why


p0325 is the knock sensor
p0301 is misfire on the #1 cylinder
p0582 and p0340 i don't know

check to make sure the oil is full and in good shape ... if it is replace the knock sensor, drive it for 20-30 miles and recheck codes.

Mar 19, 2009 | 2002 Dodge Intrepid

1 Answer

I have a 2002 Dodge Intrepid. I received 2 error codes P0441 and P0155. I had a sensor replaced and now I am receiving 1 code a Po152. Can you please tell me what this means?


P0152 is o2 sensor 2/1 voltage high. Sensor 2/1 is your right bank upstream o2 sensor located in the manifold. Make sure it is pluged in.

Dec 26, 2008 | 2002 Dodge Intrepid

1 Answer

2002 Dodge Intepid engine change now it wont start


how long ago did dealer do the job, if recently I think they should feel some obligation to assist you.

Dec 04, 2008 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

814 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...