Question about 2004 Mercedes-Benz C-Class

1 Answer

Brake lights dont work with good fuse and new bulbs

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

Look up above your brake pedal and you will see a switch connected to your brake pedal arm. This switch controls your brake lights and is the most likely thing to be at fault. Should be around $10-$20 for the part

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights dont work


Check the fuse if the fuse is good then check the power source when apply brakes everything check out good, then is the brake switch theone that mount on the top of the brake paddle. Good luck

Sep 18, 2012 | 1999 Chevrolet Lumina

1 Answer

I have 99 chevy suburban my brake lights dont work i changed the switch, checked the fuse its good cleaned the connections and checked the bulbs they still dont work


See if there is a relay for the tail lights/brake lights. I would go ahead and install new bulbs. Make sure that you get the correct bulbs. Not many vehicles still use the old 1157's.

Dec 22, 2010 | 1996 Chevrolet K1500

1 Answer

Brake lights will not work.


check all your fuses if fuses are good check brake lite bulbs see if they are blown. if bulbs are good get a test lite see if you have power to the bulb sockets have friend apply brake pedal you test power going into bulb socket if you have no power brake lite switch behind brake pedal could be burnt out. p.s dont forget to check all fese relays when checking your fuses.

Apr 26, 2010 | 2006 Chevrolet Colorado

1 Answer

Brake lights dont work,fuse good ,bulbs good,third light works


The third brake light switch works off a module for it is a sealed unit with a inverter that takes 12 volts beefing the voltage to 110 volts for the light emitting diode lights in it. It these terms you will need a new brake light switch located by the brake pedal

Apr 20, 2010 | 1997 GMC Jimmy

1 Answer

MY BRAKE LIGHTS DONT WORK, THIRD BRAKE LIGHT WORKS, FUSE IS GOOD BULBS ARE GOOD AND NEW BRSKE SWITCH, TAIL LIGHTS WORK???


you have a broken wire some were if you cant find it you can run a seperate power wire from the third brake light to the brake lights but i would check for power at the brake lights first to make sure its not a ground problem

Jan 11, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

2003 Impala Brake lights dont work


The brake lights are routed through the signal light switch.
Looks like that will be the next switch to replace and the problem.

Sep 06, 2009 | 2003 Chevrolet Impala

1 Answer

2005 chev trailblazer v6 4.2 rear side brake light dont work the top rear brake light works fuse 12 front works rear seat below fuse 16 and fuse 34 good bulbs good where do i check next


CHECK FOR POWER AND GROUND AT THE CIRCUIT BOARD FOR THE AFFECTED BRAKE LIGHT. IF THAT CHECK OUT GOOD THEN CHECK THE BULB CONNECTION FOR BURNED CONNECTORS, THIS IS A COMMON PROBLEM. LOOPING A TEST LIGHT FROM THE POWER TO THE GROUND CONNECTION AND HOLDING THE BRAKE PEDAL DOWN IT SHOULD LIGHT. IF IT DON'T THE CIRCUIT BOARD IS BAD.

May 16, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

Tail lights dont work


Replace the bulbs.
The bulbs will have two seperate elements in it which is why the brake light works.

Take the bulbs out and you will see the seperate elements.

Jan 08, 2009 | 1995 Subaru Impreza

Not finding what you are looking for?
2004 Mercedes-Benz C-Class Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...