Question about Acura Legend

1 Answer

My acura legend 1990 jumps out of second gear and sometimes wont get in gear.just sart makin a loud noise but gets quit when i clutch in .i think its my clutch thats goin out but dont know

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Acura Expert
  • 268 Answers

Probably your synchros in the transmission, if so it's cheaper to replace the tranny with a known good/tested junkyard trans.

If it was your release bearing on your clutch you would hear a ringing noise when you push the clutch in to release it.

If the car is in overall good shape you might consider changing the trans and installing a new clutch kit, it will come with the bearings, etc. Be prepared to lose a gear completely and you'll have to skip that gear during your shifting order to get up to speed.


Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'90 Acura legend tranny slipping?


doesn't need a rebuild
try an oil change for the transmission as it indicates dirty oil and sticking balves
should have been changed at the 60000 miles mark or 120,000miles
run fault codes to check for torque converter clutch servo/ solenoid problem

May 13, 2017 | 1990 Acura Legend

1 Answer

I have an acura legend that makes noise in drinve as if it wants to drive awaybut in park its smooth i was told it may be the center bearings


I recommend that you take this to a dealer and at least ask them to have a tech drive it and see what they think the noise is.

Oct 04, 2012 | 1990 Acura Legend

2 Answers

I have a 91 acura legend ls i just did a full engine and ****** swap, it will shift through gears manually but when in d4 it wont


sounds like your transmission fluid is low or the trans is going out or you might just have a bad pressure plate and clutch i used to work with my familey at the shop

Jun 01, 2012 | 1992 Acura Legend

1 Answer

Replacing acura legend clutch master cylinder


Well, it just unbolts, remove fluid line and replace the unit.

What is very important is to "bench bleed" all of the air before mounting unit. parts stores have easy bleeding kits that essentially reroute the output from the unit, directly back to the reservoir. if you do not pre bleed, you may die before you ever get it working...

May 24, 2010 | 1990 Acura Legend

2 Answers

My 89 acura legend wont start .All my gauges com on but when i turn the key nothing happens


Could be the battery needs jumped. Has anough charge to light up the lights but not anough to crank the engine.

Feb 23, 2010 | 1989 Acura Legend

1 Answer

Have a '94 Acura Legend that is making a wierd noise(s). After starting engine, hot or cold, with foot on brake, shifting into any gear, after 2-3 seconds, I hear a noise that is similar to a person...


Check all the hoses on the engine for cracks and wear. If the car has a vacuum brake booster, it could be worn out. There is a large rubber diaphragm in it that can crack.

Mar 25, 2017 | 1994 Acura Legend

2 Answers

Car ill not start


you need the electrical part of the ignition switch this is a common problem on this model.

Mar 21, 2009 | 1994 Acura Legend

1 Answer

My 93 acura legend starts but it cannot move when shift to drive. what do you think the problem is?


Bro I think you clutch lining is already worn off or there might be something wrong with your hydraulic shifter to allow your gears to be engaged, my suggestion is, have it be diagnosed or repaired by a mechanic. I hope i was able to help !!!!

Nov 06, 2008 | 1991 Acura Legend

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...