Question about 1987 Toyota Supra

Open Question

Where is the engine number located on a toyota soarer twin turbo. i need to find it on th actuall engine but cant locate it.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota soarer twin turbo 1991 model running rough any ideas as to what may be causing my car to play up like this?


Hi Chris:
I'd start with standard maintenance procedures:
- Air Filter
- Spark plugs
- Fuel delivery system clean.

Depending on milage and maintenance history, a 1991 engine will be starting to display signs of age. Valves, timing linkages, rings, etc. age creeps up on them. "Rough" is usually associated with mis-firing. That leads it spark and fuel as the primary check, and then compression as the secondary diagnostic that I would be looking at.

Hope this helps.

Jun 22, 2015 | Toyota Cars & Trucks

1 Answer

Can a subaru engine fit in a toyota estima? has anybody tried it and got successful? i want to change my 2.2 turbo diesel engine to a 2 litre twin turbo subaru engine


No. engine mounts, electrics, ecu, axels and a whole lot of other stuff would need to be changed and cut and welded.even after that you could have a host of other difficulties. not an easy task for even the experienced engineer.

Jul 23, 2014 | 1997 Toyota Previa

1 Answer

Timing Dpecs for Toyota Supra 87 6 cylinder


1987 non-turbo: 10 deg Before Top Dead Center (BTDC) @700 rpm
1987 Turbo: 10 deg BTDC @650 rpm.

To set the timing, you will need to connect a jumper wire between terminals E1 and TE1 on the diagnostic terminal. This diagnostic terminal is located just aft of the engine compartment fuse box. It is a black plastic box marked "diagnostic" on the cover, which flips open to reveal the terminals inside. There is a diagram on the inside of the cover which explains the terminal positions. On the Turbo model, you need to remove the forward section of the engine cover to gain access to the number one spark plug wire.

Jul 25, 2009 | 1987 Toyota Supra

1 Answer

Engine compatible


Yes. However it is a very expensive swap $5000 to $8000 to do it right. You will need the 1J or 2J engine, transmission, wiring harness, ecu, and alot of other pieces to do the swap. The engine brackets will need to be modified and you will have to upgrade your brakes. This kind of swap requires a good knowledge of the Toyota Supra and the engines. I do not recommend this swap for a beginner. A cheaper way is to take a 7M-GTE and upgrade the internals and turbo.

Jul 09, 2009 | 1987 Toyota Supra

2 Answers

Just need to find engine number


Hi,

yep under the plenum, from on top you can only read half...you need to get under it to see the whole number...

check and let me know....

Thanks.

Jun 17, 2009 | 1989 Toyota Supra

1 Answer

Where is the engine number situated in 2003 corolla toyota saloon


The engine model is on the emissions label under the hood on the hood. This the number you need to order parts etc... the actual serial no of the engine is usually not required only VIN and eng model.

Jan 08, 2009 | 2003 Toyota Corolla

1 Answer

Starting problem


there is some loose connection between the delta connection side of the engine and the spark plug so check the connection and then there wont be any starting problem

Jul 22, 2008 | 1991 Lexus LS 400

1 Answer

Turbo


let me know if you want new or used and where you are located i find car parts as a profession, especially hard to find stuff

Jul 02, 2008 | Lexus IS 300 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...