Question about 2003 Toyota Land Cruiser

Open Question

How to remove top timing gear on Toyota 1kz-te. I have removed bolt and tried to gently prize the gear off by using two levers and tapping centre bolt but do not want to break anything

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know the torque settings for cylinder head for 1kz-te


Hi there:Cylinder tightening stages for a Toyota 1KZ-TE 3.0 turbo Diesel are...
Stage 1 39nm
Stage 2 90 degrees
Stage 3 90 degrees

Tightening sequence is as follows:

18-12-10-04-02-05-07-13-15
16-14-08-06-01-03-09-11-17





Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 25, 2012 | Toyota Land Cruiser Cars & Trucks

1 Answer

How to remove ford door panel au11 2001. window will not go up or down


My AU11 is a XR8 with premium sound. I say this because maybe the speakers in the doors change the way the door panel is removed. I am describing the front door panel removal.

1. Remove the door lock knob by pulling it up.
2. Remove the two screw covers covering the screws which are above the speakers by gently prizing them out with a screwdriver.
3. Under one of the covers (the one closest to the speaker) is a 10mm bolt, remove this bolt by using a small 10mm socket.
4. Remove the two screw covers on the bottom of the door and remove the two phillips screws underneath.
5. Remove the phillips screw that is near the door lock knob but on the centre pillar side of the door panel. This screw is the only one that is not under a removable cover.
6. Remove the door release bezel by gently prizing the top of the bezel between the vinyl and the bezel with a screwdriver. For this you need to be gentle in order not to damage the vinyl.
7. Once the bezel is off you can see another 10mm bolt underneath that must be removed.
8. Gently prize up the electric window switches. I prized mine up carefully by using a screwdriver in the gap between the armrest and the electric switch panel. Unplug the electric switch panel which is a captive plug so you need to use a screwdriver to release the catch. You can also do the same for the electric mirror plug once the door panel is off.
9. Under the electric switch panel is another phillips screw that must be removed.
10. The door panel can now be removed by gently prizing it away from the door. I just used my hands for this but maybe you will need a wooden spatula or similar to assist. The door panel will offer some resistance and pop once the clips release. If you encounter strong resistance maybe you have another clip or screw etc that needs to be located.

Dont forget to unplug the electric mirror wires.

Jul 28, 2010 | Ford Futura Cars & Trucks

1 Answer

How do you remove the rotors?


jack up your car and put on stands remove wheels then look at the brakes,look behind the calipers there will be a bottom and top bolt to undo remove them and gently pull the calipers back off the discs,they can hang on their own hoses they wont brake or leak,gently tap behind the discs with a soft hammer to remove them

Nov 14, 2009 | 2005 Toyota Corolla

4 Answers

1kz te automatic turbo engine overheat


Sounds like you have the classic cracked cylinder head the 1KZ TE motors are renowned for

Aug 05, 2009 | 1995 Toyota 4Runner

1 Answer

Engine timing marks for toyota landcruiser 1KZ-TE


The separated gears are turned in opposite direction to each other untill the locking holes align.
It needs abit of force to align the holes,then lock the holes with M6 bolt.

Apr 05, 2009 | 2003 Toyota Land Cruiser

1 Answer

Loose automatic gear lever


yes the gear lever is bolted down if it is not loose then the bush in the gear lever is worn take consloe off and tou will be able to get to them or more clearly see what wrong good luck

Dec 28, 2008 | 1988 Toyota Cressida

1 Answer

Timing marks


send me your email and i will email you the full workshop manual if i can. The timig marks marks are pretty easy to see any way. 1 on cam is at top. 1 for fuel pump is at about 2 oclock position

Oct 06, 2008 | 1995 Toyota 4Runner

1 Answer

VW steering column 1969


with the bolts removed try gently prying it apart at the centre often they still lock in aswell as use screws so although you have removed the screws its still clipped together it should separate with some gentle assistance

Jun 24, 2008 | 1998 Volkswagen Beetle

Not finding what you are looking for?
2003 Toyota Land Cruiser Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...