Question about 1994 BMW 3 Series

1 Answer

Hi. i have just replaced a barrel on a bmw 316i auto n reg. this barrel i bought second-h. it also came with this box,now this is were i need some assistance.this box has the letters [ews 11]and 61.35-8 380 365] as i have said i replaced old barrel with new but this box has something to do with de ignition. it has to plug in somewere and i cannot find were it goes in the car i have not turn the car on yet as i was told not to until i find out about thi box

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

Im presuming you are talking about the wires which come from the switch unit at the side of the switch housing, if you took the old one off it should be easy, if you didnt look to the side of the steering column and look for an empty socket your plug wont go into the wrong socket, remember you have to refit the ring round the replacement ignition lock as this "reads" the information on your key and allows you to start the engine

Posted on May 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset inspection lights on a r reg 316i auto


if you dont have a rest tool then , go the engine comaprtment look for the round diagnostic plug , with the ignition turned on , put a wire on pin 7 pin conecting to the earth should reset the inspection lights

Jan 14, 2013 | 1993 BMW 3 Series

1 Answer

I have a bmw 316i compact and my key will not turn the ignition no more any answers


Hi

Very common fault, is the key just spinning around? if so the ignition barrel is hot so you will need a new one, if you dont have time right now to fix it then turn tha car off turn the steering all the way right then put the key in the ignition while also turning full steering lock right, this often gives the barrel switch some grip and you can start the car.

Do you need more specific information on how to repair this yourself?

If so do get back to me and I will tell you how.

Regards

Dan

Dec 30, 2010 | BMW 318 Cars & Trucks

1 Answer

Free manual for 316i auto j reg 1992


try this url http://www.torrentdownloads.net/searches/bmw+316i+1+6+auto++e36++service+manual+1992+1998 let me know if that helped ?

Oct 07, 2010 | BMW 3 Series Cars & Trucks

1 Answer

My bmw 316i model 1997 has problem releasing the steering lock mechanism. Key also battles to staert car.


order a new ignition barrel from your local BMW agent before your lock packs up all together and you will have an even bigger problem, to remove your barrell turn your key to the first position then insert a 1.2mm rod or drill down the little hole in the edge of the chrome key slot to push down the detent that hold the barrell in, pulll out old barrell with the key then fit new one.

Jun 25, 2010 | 1997 BMW 318

2 Answers

I need a manual for a bmw 316i compact 1996


These can be bought at most discount parts huses, e.g. Autozone, Advanced Auto, O'Reilly's, and Pep Boys for about $20.00. Haynes Service Manual:

Apr 07, 2010 | BMW 3 Series Cars & Trucks

1 Answer

I have a bmw 316i sport v reg, how do I re fill the steering fluid


with engine idling at normal temp open top of filler and top up to between marks, occaisonally turning steering from lock to lock.

Dec 28, 2009 | BMW 3 Series Cars & Trucks

1 Answer

How do you take the old ignition barrel off 1996 bmw 316i ?? please help


on the edge of the ignition barrel there is a little hole, you must turn the ignition to the first click and insert i 1.2 mm rod (drill bit)about an inch down into the lock and puch back the ident then pull the key and barrel out together.

Oct 01, 2009 | 1996 BMW 318

1 Answer

Car


Just follow the top radiator hose, it will run right into thermostat housing

Aug 27, 2009 | BMW 3 Series Cars & Trucks

1 Answer

Can you tell me whee to find the thermostat on a bmw 316i aoto k reg


Hi,
If you are referring to the coolant thermostat, though I'm not familiar with your model, basically thermostats are located in a housing on the engine where the top radiator hose connects to that housing. For the most part, they are pretty easy to replace. If you have an overheating problem with your car, I hope this fixes it.

Aug 27, 2009 | 2009 BMW 3 Series

1 Answer

How do i change the torque settings on my bmw e36 316i 1991 j reg its not a 318i but parts of a 318i would thay fit a 316i and work fine


Hi unsure what you mean by change the torque settings, if you mean on the head question is why? If yes for head, there is a tool for that & go to Download PDF search | PDFTown.com
for more info

Jul 08, 2009 | 1996 BMW 318

Not finding what you are looking for?
1994 BMW 3 Series Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...