Question about 1986 Suzuki Samurai

2 Answers

I have an old suzuki sj 413 , i want to install power steering

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It can be done but you need the following parts from other Suzuki models and the know how on hot to fit them.

Suzuki Jimny power steering box complete with drop arm
Suzuki Vitara power steering pump (complete with pivot and tensioning bolt)
Suzuki Vitara power steering reservoir
Suzuki Vitara power steering hoses
Suzuki Vitara power steering pump bracket
Suzuki Vitara power steering belt pulley (from the end of the crankshaft)
2x M10x 20mm bolt
1x M10x 25mmx2mm repair washer
1x M8x 45mm bolt with nyloc nut
4x M6x 20mm bolt
4x M8 2mm thick washer
around 3 litres power steering fluid
several large cable ties
power steering belt (gates part number 4PK790 / QH part number QBR4790)

There are very comprehensive write ups on www.suzuki4x4.com/forums

Posted on Jan 22, 2013

  • Dave H Jan 22, 2013

    It can be done but you need the following parts from other Suzuki models and the know how on hot to fit them.

    Suzuki Jimny power steering box complete with drop arm
    Suzuki Vitara power steering pump (complete with pivot and tensioning bolt)
    Suzuki Vitara power steering reservoir
    Suzuki Vitara power steering hoses
    Suzuki Vitara power steering pump bracket
    Suzuki Vitara power steering belt pulley (from the end of the crankshaft)
    2x M10x 20mm bolt
    1x M10x 25mmx2mm repair washer
    1x M8x 45mm bolt with nyloc nut
    4x M6x 20mm bolt
    4x M8 2mm thick washer
    around 3 litres power steering fluid
    several large cable ties
    power steering belt (gates part number 4PK790 / QH part number QBR4790)

    There are very comprehensive write ups on www.suzuki4x4.com/forums

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 102 Answers

The only way you may get this problem solved is to find a late SJ413 which may have had it, and graft it on. Yours will have leaf springs and you'll have find one of the last leaf-spring models at the wreckers. They may not have even come into your country with power steering - they didn't get released in Australia with P/S and the only way to find it was at a wreckers that brings in cars from Japan or the like. The cheapest way to have the lightest possible steering is to stick with the original width and offset rims, and to keep the tyre pressure up to 35-40 psi. The recommended is only 22 psi!

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn and steering wheel controls not working.


    images for 2004 Suzuki Forenza no controls on

    Suzuki Steering Wheels and Horns ' eBay

    www.ebay.com/sch/Suzuki-Steering-Wheels-and-Horns/.../i.html
    eBayFind great deals on eBay for Suzuki Steering Wheels and Horns in Steering ... 2004Suzuki Aerio Grey and Black Steering Wheel with Airbag OEM 2003 ... 04 05 06 07 08SUZUKI FORENZA- Steering Column, Black with Key, NO AIRBAG ... 2006 Suzuki Aerio Gray Leather Steering Wheel with Controls OEM 05 06 07 Nice.

Sep 25, 2015 | 2004 Suzuki Forenza

1 Answer

Jeep power steering pump


you must look.
power steering is optional on all old suzukis, (light weight)
my 91 weights only 2000lbs wet.
no need for P.S ever.

these are called options, you need to LOOK.

Jul 29, 2013 | Suzuki Cars & Trucks

1 Answer

Hi i have a Suzuki sj 413 and its got su carb and brand new coil but there's no spark at all and its been rewired by the haynes diagram but still no sparks it turn on the starter motor but nothing


old post. , its not stock, and you failed to state the year.?
sure
no spark these old cars have a 100% dedicated Distrib.
there is no EFI , early years.
the is a coil of that has no spark then the Dizzy VR and inside ignitor is bad.
if the spark is dead at 4 spark plugs or very weak and ok at the coil that means the timing on the CAM or the Dizzy or both is way off.
caused by rotor sparking between cap tower positions.
http://www.fixkick.com/

Jan 29, 2013 | 1994 Suzuki Samurai

1 Answer

I have brought a second hand lockset for my suzuki sj samurai (Ignition lock, both door locks and the tailgate lock and matching key) and i need to replace all of them as i have lost my key and cant get a...


The fastest thing to do is to take one of the locks to a locksmith and have them make a key from it.This will save a lot of time and disassembly.If you still want to change all the locks,you will have to figure out how to remove the door trim panels,disassemble the steering colum,etc.(every vehicle is a little different,never worked on a Samurai myself)

Sep 06, 2012 | 1991 Suzuki Samurai

1 Answer

Steering wheel is hard to turn..fluid is good. 10yr old suziki grand vitara, 4x4, 6cly 136,000m


could be several things , a worn power steering pump ,
binding ball joints or other front end components,
or power steering belt is loose/missing.

Aug 13, 2010 | 2006 Suzuki Grand Vitara

2 Answers

Hi, we have trouble with the 4x4 lever shift on a suzuki xl7. Is there anything to adjust the properly function


most lever shifts cause problems every now and then basically the cables that change the transfer case into 4x4 get sticky due to being under the vehicle and close to the body which they get gummed up with debris from the road and what not

Jun 02, 2010 | 2002 Suzuki XL-7

1 Answer

Firing order for suzuki 543cc


Suzuki SJ also called Sierra / Samurai

- Suzuki Engine Serie F -- F5A / 0.5L (543cc)
- Firing Order for F5A -- 1 3 2 (and other details)

I hope help you with this. Good luck (remember rated this).


Sep 23, 2009 | Suzuki Samurai Cars & Trucks

1 Answer

Sj 410 to 413 engine change


the gearbox needs to be changed too.

Jan 31, 2009 | 1994 Suzuki Samurai

1 Answer

Valve clearance


h

i hope this helps good luck
thanks for using FIXYAbc70713.gif

Aug 26, 2008 | 1995 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...