Question about Toyota 4Runner

1 Answer

What other motors can replace the factory 94 toyo 4runner V6 3.0?

94 toyota 4 runner v6 3.0 blown head gasket... can i replace with a better motor and bolt all my parts to it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

NO your best bet is to remove both heads and send them away for crack testing and surface grinding plus make sure the block has a flat and clean serface ,no water holes eaten away and near to the cylinder bores, if all ok then get the heads done and tighten down to correct tension which you will get on the VRS (valve regrind set). then it will last for years

Posted on Oct 01, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Head gaskets problems with v6 toyota 95 eng

Is there a question ?

Go to You Tube Video, to
see how the job is done

That is a very reliable motor
thru 1995 only,not so much after
with 4.0

Mar 03, 2013 | 1995 Toyota 4Runner

1 Answer

1999 ford explorer blown head gasket. is it ok for the head be resurfaced. V6

well experts recommend that, i replaced a head gasket to a 94 toyota 4runner and i did not resurfaced, all i did was a visual inspection of valves springs seats etc,and of course a good clean aruond both surfaces, block and head, if all this looks good, go ahead, goodluck. head bolts must torque to spec. good luck

Jul 15, 2011 | Ford Explorer Cars & Trucks

1 Answer

Having trouble putting vaccum hoses and fuel hoses back after replacing head gaskets,6 cilinder,3.0l,94 toyota 4 runner

If you mean it's difficult slipping the hose onto the nipple, try a little vaseline on the nipple to make sliding the hose easier.
Also try free registration at Free registration gives you free access to several repair and shop manuals for most vehicles. You'll get detailed info on making the repairs.

Mar 19, 2011 | 1994 Toyota 4Runner

1 Answer

My toyota 4-runner keeps blowing off the radiator cap. The temperature gauge not running hot. Can someone help me?

From the description you gave sounds like a head gasket is bad. That kind of pressure is extreme. Check your oil and see if it's "milky". It sounds like blown head gasket is allowing compression into cooling system. I'd have it in to a shop ASAP before it blows your radiator and does more damage.

Feb 24, 2011 | 1994 Toyota 4Runner

3 Answers

Hello need info on how many oil liters do I need for the oil change toyota 4 runner V6

this toyota 4 runner takes 5.2 liters of oil and the correct oil is 5W 30 motor oil. hope this helps.

Jun 18, 2010 | 2004 Toyota 4Runner

1 Answer

Toyota 2006 4 Runner: What is the recommeneded milage schedule for replacement of the standard factory installed spark plugs?

Toyota recommends 5ys or 100k miles which ever comes first. As a professional mechanic, I recommend this at 3yrs or 80K miles for better performance and optimal gas mileage. Also having the spark plugs on the motor 5yrs/100k may lead to plug seizing to the aluminum heads.

May 22, 2010 | 2006 Toyota 4Runner

1 Answer

My rpms wont go over 3000 on my 94 toyota 4 runner.

the V6 has a rev limiter in gear that keeps it under this in first gear. put the tranny in Power mode if it's an automatic. it will **** more gas, however.

Apr 13, 2009 | 1994 Toyota 4Runner

1 Answer

1993 toyota 4 runner head gasket

I've had mine blow twice on the EFI 3.0 engine. Toyota came with a beefed up gasket. Make sure that is the one they are using.

Sep 08, 2008 | 1993 Toyota 4Runner

1 Answer

Toyota 4Runner-head gasket fitting

codigo del juego de empacaduras del motor de la ford runner tollota 2003

Jul 17, 2008 | 1993 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides