Question about 2000 Hyundai Accent

2 Answers

Engine won't start. Turns over just fine. 12 engine codes P0141,0422,0562,0201,0202,0203,0204,P1553,P1403,P0444 and P0135. P0141 is a repeat.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 386 Answers

You got a ton of problems, P0141 =O2 sensor . P0422=Main Catalyst Efficiency Bank One Threshold P0562= System voltage Low
P0201 thru P0204 is injector circiut

P01403 carbon Canistershut off valve control circiut

P0444 Evaporative Emission control system purge control valve circiut

P0135 Ox sensor heater circiut malfunction...

Looks like alot of electrical issues, You will need a manual to trace every circiut for open wires and or harness damage, possible evn ECU gone bad...

Posted on Oct 01, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 14,036 Answers

CODE PO562 SYSTEM VOLTAGE LOW.THIS COULD BE THE PROBLEM.YOUR ALTERNATOR NOT CHARGING.NOT ENOUGH POWER TO RUN THE PCM.HAVE YOUR CAR CHARGING SYSTEM CHECKED.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs fine for about 20 minutes a huge cloud of white smoke out of the tail pipe less power and an ubnormal idle with the check engine,oil light on just for sort time but, in minutes back to normal.


More then likely a blowen seal on head. Take to dealer and have it checked if you catch it befor it go's completely out it shoulden cost as much to fix. But it is going to cost . good luck

Jun 24, 2015 | 2001 BMW 325Ci

1 Answer

Got Honda accord 2000 code po135 replaced 02 sensor and stil show same code



How to Diagnose a P0135 -Heater
Performance Bank 1 Sensor 1 (GM 3.5L)
January 31, 2012 Updated: October 29, 2014 Written by: Abraham Torres-Arredondo Article Id: 371

image_1.gifIf your check engine light is on and you have a diagnostic trouble code P0135 stored in the PCM's memory... then you've come to the right place to test and troubleshoot the upstream oxygen sensor.
A P0135 DTC says: HO2S Heater Performance Bank 1 Sensor 1... and this means that the PCM (Powertrain Control Module = Fuel Injection Computer) has detected a problem with the front oxygen sensor's heater element or a problem in the heater's circuit (wires).
In this tutorial, I'll show you how to check the oxygen (O2) sensor's heater element and the two circuits that feed it with power (10 to 12 Volts) and ground with a multimeter.
In case you're wondering, where the oxygen (O2) sensor that the code P0135 is accusing of being BAD is... this bad boy is located on the exhaust manifold and before the catalytic converter.
To help you navigate this article, here are its main points:
  1. Symptoms of a BAD Oxygen Sensor Heater Element.
  2. What Tools Do I Need to Test Code P0135?
  3. What Does the Heater Inside the Oxygen Sensor Do?
  4. Circuit Descriptions of the Downstream Oxygen Sensor.
  5. Start Here.
  6. TEST 1: Oxygen Sensor Bank 1 Sensor 1 Test.
  7. TEST 2: Checking 12 Volts to O2 Heater.
  8. TEST 3: Checking the O2 Heater's Ground Circuit.
  9. TEST 4: Ohming the O2 Heater Element.
  10. P0135 O2 Sensor Heater Test Summary.
Buying a Digital Multimeter for Automotive Diagnostic Testing (found at: easyautodiagnostics.com).
  • Scan Tool.
    1. Don't have one?... check out my recommendation: Abe's Scan Tool Recommendation.
  • Wire Piercing Probe.
    1. Although this tool is not an absolute must, if you do buy one, you'll realize just how easy it makes testing the voltages inside the wires.
    2. If you need to see what this tool looks like, you can see it here:Wire Piercing Probe.
  • < Prev
  • 1
  • 2
  • 3
  • 4
  • Next >

  • Applies To:
    back-25.png forward-25.png
    Buick Vehicles:
    • Rainier 4.2L
      • 2004, 2005
    Chevrolet Vehicles:
    • Colorado 3.5L
      • 2004, 2005
    • Trailblazer
      • 2004, 2005
    3.5L image_thumb_home_page_1.jpg
    How To Test for a Blown Head Gasket (GM 3.5L, 4.2L)
    How to Test the MAF Sensor and Codes: P0100, P0101, P0102, P0103
    How To Test for a Blown Head Gasket (GM 3.5L -FWD)
    All Articles: 3.5L "A day without sunshine is like, you know, night"
    Steve Martin
    MORE TUTORIALS:
    image_thumb_home_page_1.jpg

    Feb 03, 2015 | 2000 Honda Accord

    1 Answer

    My 07 vw passat fsi engine management light comes on intermittently sometimes the parking brake and the engine light Come on together then one goes off then the other the next day. for 3 days now my engine...


    if you can read the faults then teh code reader should tell you ,if not then download OBDII codes from a torrent site as iam feeding .


    P1479 Vacuum system, brakes - mechanical fault
    P1403 EGR Flow Deviation

    3089 is not showing in my VW code sheet

    Dec 10, 2014 | Cars & Trucks

    1 Answer

    Check engine light is on, have codes P1490, P0444, P0447 & P0420


    you can google these error code on the internet and usually can find them no problem

    Mar 14, 2014 | 2002 Nissan Maxima

    1 Answer

    I have a code of P0135 and P0030 are these oxygen sensor in a 06 saab 9x-7


    The code P0135 is a fault code for the o2 sensor before the catalytic converter.Replace the o2 sensor and then reset the computer and it should be fine afterwards.The check engine light should stay off then.

    Dec 31, 2011 | 2006 Saab 9-7X

    2 Answers

    Code po113,how do i fix it


    You have a bad O2 sensor on the left side of the engine (Bank 1)
    http://www.obd-codes.com/p0135
    The heater in the O2 sensor has failed. Replace the O2 sensor located on the output side of the exhaust manifold between the engine and the catalytic converter closest to the engine.

    See this information for other possible causes.
    http://repairpal.com/OBD-II-Code-P0135-and-P0155

    Also see the Video below:

    Thanks for choosing FixYa,
    Kelly

    Jun 11, 2011 | 2005 Chevrolet Malibu

    3 Answers

    Error code p1403


    p1403 is a problem with the DTML sensor ... thats associated with the charcoal canister ... that is often caused by putting too much gas in the tank (overfilling) ... gas gets into the charcoal canister and contaminates it .. you could also have a bad sensor .. there are two .. one on the throttle body the other on the engine .. sometimes the wiring going to these sensors gets corroded or damaged .. contamination in the canister may clear itself in time if you avoid overfilling ..

    Mar 19, 2010 | 2001 Hyundai Accent

    1 Answer

    CODES P0134 AND P0135 ON 96 JETTA .CAR HAS NEUSPEED SUPERCHARGER THAT I INSTALLED CAR RUNS FINE EXCEPT CHECK ENGINE LIGHT KEEPS COMING ON.


    P0134- O2 sensor Circ, bank 1, Sensor 1 no activity detected

    P0135- O2 sensor heater circ, bank 1 sensor 1 malfunction

    Dec 19, 2009 | 1996 Volkswagen Jetta

    1 Answer

    P1403 DPFE


    this basically means the EGR valve has been wrongly connected, the hose is partially off or is faulty, also the hoses like to block up with a carbon build up wich will cause the valve to stay partialy open giving you a poor idle

    Oct 09, 2009 | 2002 Daewoo Lanos

    2 Answers

    Power Loss Mercedes 220 cdi '98 Trouble code P1403


    It sounds like you have a vacuum leak somewhere between your valve and your source. A common vac leak that occurs on the 220 is at the vac. rubber y located at the back of the intake manifold. Follow your vac. line from the egr to the switchover valve and from the switch over valve to the source. Which is probably the y connecter

    May 26, 2009 | 1998 Mercedes-Benz C-Class

    Not finding what you are looking for?
    2000 Hyundai Accent Logo

    955 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...