Question about 2007 Chrysler Sebring Sedan

1 Answer

I got a code P2004'' when a diagnostic test was ran on my 2007 Chrysler Sebring that said my intake runner controller bank was stuck ''open''. Can you help me find an answer to this.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

What engine? So the guy running the test could'nt point it out to you? You need to find a shop that qualified to repair the car. its a valve on the intake manifold that opens and closes to help th engine produce the most power at low and high rpm. they get stuck. sometimes you can clean them.

Posted on Oct 01, 2009

  • kevinrmartin
    kevinrmartin Oct 02, 2012

    I'm currently having this same problem and of course it puts the check engine light on. when this happen the automatic start shuts off. How do I find this valve and try to clean it? or do I have to take to a chrysler dealer to have it fixed?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 dodge avenger code p2004


Intake Manifold runner control stuck open - bank one:
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection

There is a factory service bulletin for this problem for 2007-2008 Dodge Avengers. (JS)

Sep 22, 2015 | Dodge Cars & Trucks

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

2 Answers

P2004 code. where is the imrc valve located?


It is attached to the intake manifold, it is a valve that adjusts the runner length of the intake for optimal performance and fuel economy.

Jan 25, 2015 | 2006 Pontiac G6 GTP

1 Answer

Chhrysler sebring 2007 2.4 litter getting code p2004 intak manifold runner control how do you fix it


code p2004 refers to intake manifold air control actuator bank 1---actuator stuck open===causes --wiring--intake manifold air control actuator --mechanical fault.
also refers to intake manifold air control solenoid bank 1 solenoid stuck open===causes--wiring intake manifold air control solenoid --- mechanical fault
you may be able to remove and clean the units to ensure they move freely otherwise replace them

Dec 31, 2013 | Cars & Trucks

1 Answer

Code p2017 on a chrysler sebring


Here is the definition.

P2017 CHRYSLER - Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1

Possible causes - -
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection
- Faulty Manifold flow valve
- Faulty Powertrain Control Module (PCM)

You'll need someone with a shop manual to get the testing procedures.

Apr 14, 2013 | 2007 Chrysler Sebring Sedan

1 Answer

P2004 intake man.control bank 1 stuck open


The intake manifold runner control (IMRC) cables have plastic ends that like to break. Check your IMRC to see if the cable it attached. If the cable s attached, then the IMRC actuator is probably defective. (see diagram)

6_17_2012_2_48_42_pm.gif

Jun 17, 2012 | 2003 Ford Focus

1 Answer

Honda accord 2007 2.2 fault code P2004


P2004 Intake Manifold Runner Control Stuck Open (Bank 1) check for a cracked or broken vacuum hose on the intake manifold, be careful, the little nubs they attach to are normally plastic so use care when removing, the dealer will say new manifold, But check for hose fittings or a cracked hose first

Jun 30, 2011 | 2004 Honda Accord

1 Answer

Check engine light just came on. obd2 car reader code is p 15 18. what does this mean.


DTC P1518 - Intake Manifold Runner Control Stuck Open (Bank 1)

This code is the same in Toyota but the code number is P2004, I suggtes check this link Diagnostic Procedure 27613/2008-11-18_015208_p2004. (PDF format).

Keep us updated.

Feb 10, 2011 | 1999 Ford Taurus

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

1,895 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...