Question about 2004 Toyota Land Cruiser

Open Question

Landcruiser clock how to set it, the clock that comes with vehicle at top of dashboard. On the right of display that has directions etc

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How doI set the clock


Setting the Time (Without Date Display) If your vehicle has an AM/FM base radio with a single CD player and preset buttons numbered one through six, the radio will have a clock button for setting the time. You can set the time by following these steps: 1. Press the clock button until the hour numbers begin flashing on the display. Press the clock button a second time and the minute numbers will begin flashing on the display. 2. While either the hour or the minute numbers are flashing, turn the tune knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK, FWD (forward), or REV (reverse) buttons to adjust the time. 3. Press the clock button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing will stop after five seconds and the current time displayed will be automatically set. To change the time default setting from 12 hour to 24 hour, press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the clock button again to apply the selected default, or let the screen time out. Setting the Time (With Date Display) If your vehicle has a radio with a single CD player or a CD with DVD player, the radio will have a clock button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the clock button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) will appear on the display. 220 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. If your vehicle has a radio with a six-disc CD player, the radio will have a MENU button instead of the clock button to set the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the MENU button. Once the clock option is displayed. 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY will appear on the display. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the MENU button and then the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. 221 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year, follow these instructions: 1. Press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the clock or MENU button again to apply the selected default, or let the screen time out

Nov 10, 2016 | 2007 Pontiac Torrent

5 Answers

Need to reach clock on dashboard


IF the clock is blank, check if its getting power, try pressing both of the buttons on the clock or if it has one, should react somehow. I think you need to open up the dashboard to get to the clock.

Oct 03, 2008 | 1992 Daihatsu Charade

1 Answer

Why does clock stay on after I turn off the truck?


Many modern dashboards have sensors or delayed display shutdown, some models still use older technology for dashboard wiring in utilitys, suvs and other well body or tray back vehicles for a more robust system.

Oct 18, 2014 | 2005 Dodge Dakota

1 Answer

How to set the timing on a 2800d colt


Set clock on JVC KD-G 101 turn it off press the time display button located in top left corner, press and hold top right etc---------------------------------------------------------------------
Car Diagnostic Tools

Dec 07, 2012 | Cars & Trucks

1 Answer

Landcruiser problems


LOOK IN YOUR AREA FOR A AUTOMOTIVE UPHOLSTERY GUY , THEY KNOW BEST HOW TO REPAIR REPLACE OR PATCH SO IT LOOKS RIGHT, I HAVE TRIED AND FAILED TO PATCH MYSELF. LET A PRO HELP YA ON THIS ONE.. JAY

Jan 29, 2012 | 2005 Toyota LandCruiser Prado

1 Answer

I have a 2000 landcruiser and the check engine, VSC TRAC, VSC OFF. The vehicle is running good. Can you help?


It seems that any time the check engine light comes on with this vehicle, the VSC TRAC and VSC OFF lights will also come on all at the same time...

The first thing I would do is go to an Auto Zone or Advance Auto Parts and have them pull the fault codes from the computer. It's usually a free service, and 'some' of the people are knowledgable enough to point you in the right direction, as far as what caused the light(s) to come on in the first place. In some cases, simply having them clearing the fault codes will fix the problem, and you may not see it come up again, at least not for a long time.

Recently, can you remember driving the vehicle with the gas cap off? That will set a code. (Easy fix again, by clearing it.)

Nevertheless, see what code was set and go from there. I'll be happy to help you solve your problem if this doesn't cure it!

Take care and I hope this helps! :)

-Jason

Dec 22, 2010 | 2000 Toyota Land Cruiser

1 Answer

NO LIGHT DO NOT SEE TIME


You don't say which vehicle it is or whether the clock is built into the dashboard or is included on the instrument panel. (a) If it's built into the dashboard separately from the instrument panel, you need to remove the clock from the dashboard surround (it may just be a push-fit so if you can see the outer edges of the clock module try GENTLY using a small flat blade to ease the clock out of its receptacle). Once removed from the dashboard, disconnect the wiring plug, then look for a small bulb unit in the back of the clock module. Replace the bulb with a new one, reconnect the wiring connector and test that the clock lights up when the ignition is switched on before re-inserting the module back into its original location on the dashboard. (b) if the clock is part of the instrument panel, you will need to remove the instrument panel in order to get access to the relevant bulb (which will probably be on the rear of the instrument cluster directly adjacent to the location of the clock).

Jul 08, 2009 | 2003 Subaru Forester

2 Answers

Need a clock.


in the radio display

Mar 22, 2009 | 2004 Volvo XC90

1 Answer

Subaru Liberty 2004


how do i remove the clock unit from a 2004 subaru liberty from the dashboard

Mar 03, 2009 | 2005 Subaru Legacy

1 Answer

Clock inside car, mitsibishi carisma, works but the backlight doesnt work. hence cannot see clock in dark


The panel around the clock is held in place by 4 clips .
All we have to do is prise it out using a wide thin steel lever.
Dont use a screwdriver unless you want to damage the dashboard.
It comes out directly towards the rear of the car.
You can then get to the bulb on the back without taking off the
wire to the heater , There is Just enough space to do this.
you need a small screwdriver to take the bulb holder out.

the clips are located - top and bottom, left and right or one on each side?

Oct 20, 2008 | Mitsubishi Colt Cars & Trucks

Not finding what you are looking for?
2004 Toyota Land Cruiser Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...