Question about 1991 Ford Mustang

1 Answer

How do i know if i have a 1 pc rear main seal or a two pc seal on my 1991 mustang 302

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

You have a one pc rear main seal,You will have to remove trans,from the car to install the rearmain seal.Check freeze plugs,and cam plug for leaks also,while you have the trans out.Also make sure the crank shaft is not damaged with a roove cut in it from the old seal.If it does,purchsae a repair sleeve for the crankshft to put on the crankshaft before installing the rear main seal.I hope this was helpful,if so ,let me know,thanks

Posted on Oct 01, 2009

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Oct 01, 2009

    You have a one pc rear main seal,You will have to remove trans,from the car to install the rearmain seal.Check freeze plugs,and cam plug for leaks also,while you have the trans out.Also make sure the crank shaft is not damaged with a roove cut in it from the old seal.If it does,purchsae a repair sleeve for the crankshft to put on the crankshaft before installing the rear main seal.I hope this was helpful,if so ,let me know,thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am having alot of oil leakage from my 1995 ford thunderbird V8 i believe it is a 302


A rear seal is a big job. Best way to confirm is to clean it up real well and see if you can track down the leak.

Jan 05, 2015 | 1995 Ford Thunderbird

2 Answers

I need spark plug wiring diagram for a 1991 302 V8


If you are going to work on this car Purchase the Clymer manual.. or borrow one from the library.. Wiring diagram? there are 8 plug wires (firing order) and a plug for the IGN module. you did not say why you needed a diagram.. What is the car doing ? WRITE A COMMENT AND LET US KNOW WHAT YOU NEED.

Oct 19, 2014 | 1991 Ford Mustang

1 Answer

How to replace rear axel seal on a 2000 ford mustang


FOLLOW INSTRUCTION IMAGE

1-SPARE PARTS NUMBERS.

1867c952-7188-4558-b777-3b58b236b539.jpg



2- CON.....
29ce82ff-fe7e-4586-846c-af6a360d09be.jpg

3-NOTICE.
d00f40eb-d155-4f68-82ab-c3b9bf12b2fc.jpg

4- REMOVAL. Use recommended tools.
c26fbb0f-32fb-4452-b05a-3c9c217f6f8d.jpg

5- INSTALLATION.


88f3ffca-c0d9-4445-b491-7209b25fefcf.jpg

Sep 12, 2014 | 2000 Ford Mustang

2 Answers

Rear main crankshaft seal on 1991 corvette


remove transmistiom,torkconverter and fly wheel.this will give you access to the seal.

Sep 05, 2012 | Chevrolet Corvette Cars & Trucks

1 Answer

How to replace the rear main seal on a 2000 ford mustang 3.8 l


rear main is on the rear crankshaft...if its a stick removing the transmssion is easier,,if you got an automatic it is more work, it is behind the flywheel on the crankshaft...

Jun 20, 2010 | 2000 Ford Mustang

1 Answer

What all do you need to do to convert a 1992 ford 5.0 out of an f150 from fuel injection to a Carb.? I know that you need a carb, intake, and fuel pump. I'm putting this motor in my 1984 mustang it had a...


There are special electronic fuel pumps you can get for this kind of conversion that wont put to much fuel pressure in the carb and blow the bowls.
As long as the distributer is vacuum advance and for a 302 it should be able to work. The main difference will be the firing order on the truck engine may be different. So you have to make sure your #1 cylinder is at top dead center and route the post on the cap its pointing at to the #1 cylinder and go from there.
The intake and carb you have should also work.

Mar 26, 2010 | 1984 Ford Mustang

1 Answer

I have a 1965 food falcon with a mustang 302 (1978 ) v8. how do i know if it is a windsor or not?


Well there is a 302 cleveland, they are mainly an Australian engine. Identifying one is much like telling the difference between a 351 windsor and a 351 cleveland. Based on the fact that it's from Ford's 335 engine family. 8 cap screws to hold on the valve covers, the block is longer do to the timing chain housing being integrated. The fuel pump bolts are mounted vertically, and the exhaust bolt holes are diagonal. Also, a big difference between an american 302 and an aussie 302 cleveland, is the connecting rods for the cleveland are 6.000''. Where the american 302 connecting rod length is 5.090". Also, referring to a 302 as a windsor is incorrect, it's block families name is the 90 degree v8. The only engine in that family that is properly named the windsor, is the 351 windsor. The 90 degree family also includes the 302 boss. The boss has cleveland style heads, and the block has screw in freeze plugs.

Nov 27, 2009 | 2005 Ford Futura

1 Answer

1964 1/2 mustang beinig rebuilt. A new 302 engine


That's because the 302 and the 260 don't share the same accessory bolt patterns. If it's a dealer installed AC the mounting may be "custom". If you still have the original engine, transfer the bolt hole positions, drill and tap. Good luck. Measure twice!

Sep 30, 2009 | 1965 Ford Mustang

2 Answers

Rear main seal is leaking on a Ford Mustang 2003 V-6


In order to replace the rear main seal u have to pull the transmission out to access it, u will need a special seal installer tool to install the new rear main "full circle seal", it u don't use the special ford tool the seal will leak again, also if there is a groove worn ion the crankshaft the crank must be repaired or replaced or the or the seal will leak again, so this is avery diff job, a 9 on the scale of 1-10 with 10 being the mos difficult.

May 10, 2009 | 2003 Ford Mustang

Not finding what you are looking for?
1991 Ford Mustang Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...