Question about 1990 Honda CRX

1 Answer

I have my trans dropped and everything out ...i cant figure out how to get my old clutch off can someone help plx i need to have my car running asap

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Which part wont come off? after you take the 6 or 8 bolts off the flywheel, the pressure plate should come off., then the disc falls on the ground. if you dont know how to get it apart, i hope you have a qualified person to help you assemble this. the disc has to be perfectly lined up and the pressure plate bolts torqued to spec. if its not right, you will be doing it again.

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 dodge stratus and when running I put it into gear but it won't move in reverse or drive. Also the speed sencer makes a weird noise when put into gear


You may have answered your own question. That weird noise may be either the trans speed sensor or the clutches in the trans. Get it ckd out ASAP . Ck the trans fluid (if automatic trans) (engine running/in park) fluid cherry pink or brownish/ burnt smell? If burnt trans needs help, may be late but only pro shop can help. GOOD LUCK, FRANK M

Feb 24, 2016 | Dodge Cars & Trucks

1 Answer

Replacin trans,all bolts,pins,nuts,out except exhaust/muffler that friend doesnt wanna remove.problem trans wont drop acts as if its "hung up" on somethin cant figure/see why any help appreciated


if it is auto did you remove the torque converter bolts to the flex plate
if manual and you are sure that all the bolts have been removed then the clutch shaft may be rusted in the spigot bearing in the flywheel or the clutch hub is stuck on the shaft
may require a lever between the bell housing and the back of the motor to get the box to move
if all the bolts are out you should be able to move the transmission as if turning it on a shaft a bit . if you cannot do that then you still have a bolt in it somewhere
look for a bolt coming back along the engine block

Sep 13, 2015 | 1991 Ford F150

1 Answer

I am having an electrical problem with my 2002 GMC HD2500 Dura Max diesel.....did not crank at all this morning. Both batteries were 4+ years old. Figuring it was the batteries, I just went ahead and...


Starter relay , ignition switch , park neutral psition switch if automatic trans , clutch start switch if manual trans. , battery cables ,connections . If you don't know how to do automotive electrical circuit testing , your best bet , take it to a qualified repair . How to voltage drop test starter motor circuit
Starter Voltage Drop
Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter the vehicle info. year ,make , model and engine size . Under system click on engine ,then under subsystem click on starting . Click the search button ,then the blue link . Look an see what all is involved in the starting system . Use a volt meter an test to see where B+ voltage is an where it isn't while someone turns the key to start . You can rule out the load (starter ) side by jumping pins 30 & 87 where the relay plugs into . Watch this video on relays .

VEHICLE RELAYS Operation Diagnosis


Jul 25, 2017 | 2002 GMC Sierra 2500HD

1 Answer

I cant seem to get my mini's clutch to work i have replaced almost everything on it and cant seem to get the clutch working ? if someone might know way this is happaning please help


What do you mean it is not working?
You can not engage it?
You can not get it to Shift while running?
Have you Bled the AIR out of the Secondary ?
Does your System have enough Fluid?

Apr 08, 2013 | Cars & Trucks

1 Answer

2003 ford transit turbo manual gearbox, stuck in 2nd gear, cant start


does the clutch push normally or is the linkage broken not disengaging clutch, and then does shifter move around or locked and wont move, loose linkage in shifter or gears are jammed inside transmission and something went, if shifter wont move at all then trans is jammed inside and needs repair.

Jun 09, 2012 | Ford Transit Cars & Trucks

1 Answer

I have a 1997 eclipse I'm pulling the motor to


Remove the engine and transmission as one unit.
divorce them when out of the vehicle .
Marry the new engine and old trans and replace them as one unit .

Sep 26, 2011 | 1997 Mitsubishi Eclipse

2 Answers

DOES THE 5 SPEED TRANS NEED TO COME OUT ALL THE WAY WHEN PUTTING IN A NEW CLUTCH 22R TWO WHEEL DRIVE


yes because the cluch and pressure plate need to come off around the gear that fits into the transmission.

Feb 02, 2011 | 1991 Toyota Pickup

1 Answer

Trans drops into 3rd gear won,t shift to 4th


DTC P0734 is "4th gear incorrect ratio" - that's your torque converter 'LOCK UP Clutch" It's worn out (or you're using the wrong Trans Fluid required by Hyundai - SPIII OR Both). The P1624 is simply the Trans Control Unit (computer) communicating to the Engine Control Module (ECM computer) MIL - on request signal to ECM = asking it to turn on "Check Engine" light. MIL = Malfunction Indicator Lamp. When the torque converter 'lock up" clutch slips or doesn't engage, the trans automatically returns to 3rd gear and stays there (it's called 'fail safe' mode) until you cycle the ignition key, then everything resets until the malfunction occurs again.
You'll need to have an AT (Automatic Transaxel) tester hooked up to verify this. Hyundai has a Service Bulletin specifically for "gear incorrect ratio' codes. If when you changed the trans fluid, was it done at a Hyundai Service Center? If not, someone may have installed the wrong fluid.

Jun 01, 2009 | 2000 Hyundai Elantra

1 Answer

Trans. problems


when you let off the gas peddle does vehicle roll or slows quickly?

Feb 10, 2009 | 1999 Chevrolet Blazer

1 Answer

What grade oil goes into a 1998 isuzu kb280dt le gearbox


Clutch adjustment is ussually the cause of such a problem.... oil grade should not have a bearing on the issue; try to lenghen your adjustment rod a little more. For now you can change your shifting habits...Put the trans in first before cranking the engine and before coming to a stop a light...youll soon get the feel of at what speed it will drop right into first, usually just before coming to a stop.

Jan 19, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
1990 Honda CRX Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...