Question about 2002 Chrysler Town & Country

1 Answer

Code p1945 I have code p1945 in my van and need to find out what it is and what to do about it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 501 Answers

The code is code-p1945-leak-detection-pump This usually indicates a short or falure of the pump.

This is not the type of thing that can be diagnosed without a scanner and a trouble tree. I stongly recomend you take it to an expert.

Hope this helps.

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 gmc 3500 van brake light sensor comes one stops shifting right


you need to know witch ABS code and PCM code first before any repair.
hope it helps

Mar 17, 2014 | GMC Cars & Trucks

2 Answers

Code P0605 Van Does Not Run


This should make some interesting reading for you. good luck.https://www.autocodes.com/p0605_nissan.html

Jul 22, 2017 | 2004 Nissan Quest

2 Answers

1999 astro van misfire


The easiest solution to the misfire is to go down the line and eliminate the things you have fixed or not fixed to help eliminate what is causing your misfire, click on this link below to better help you understand what you need to look at to solve your problem.
http://www.obd-codes.com/p0300

Jun 10, 2010 | 1999 Chevrolet Astro

1 Answer

2004 GMC Safari van


DO'ES THE VAN TURN OVER ? DO'ES THE VAN HAVE THE FUEL PUMP RUN LONG ENOUGH TO BUILD FUEL PRESSURE?IF YOUR FUEL PUMP AND STARTER ARE WORKING THEN CHECK FOR FIRE TO THE PLUGS. YOU MAY NEED TO GET THE CODES READ TO FIND THE PROBLEM IF YOU HAVE FUEL AND FIRE.ONCE YOU GET THE STORED CODES,REPLACE THE SENDER THAT CAUSED THE CODE OR REPAIR THE WIREING TO IT.

Oct 06, 2009 | 2004 GMC Safari

1 Answer

Check engine light is on my 1998 ram van 3500


Bring it to a parts store, most will scan for engine trouble codes for free. They will plug a hand held scan tool into the vans diagnostic port (under the dash) and 'read' codes stored in the van's computer. They can tell you what the codes mean, and suggest how to fix it. If you have any further questions at that time, post them here with the code #'s. Good luck. Curt

Apr 28, 2009 | 1998 Dodge Ram 3500 2WD

2 Answers

Reprogramming blank key iveco daily


Unfortunately there is no solution to this except to take it back to Iveco for reprogramming.

I am led to believe from my locksmith that there are two types of transponders generally put into cars and vans.

The first is a simple chip wtih a code which matches a code in the car / Van

The second is a chip which has a set of codes. They are read in order and the car / van remembers which one was used last. If you use the wrong code in the sequence then the car / van will ignore it and not let you start the engine.

The Iveco is unfortunately in the second group. If, like me, you snap your key, you can superglue a new key to the old and it works fine. The chip doesn't need to be "too" close to the barrel. Yes, it looks ugly, but it's much cheaper!

Mar 15, 2009 | 2000 Chevrolet Tracker

4 Answers

What is the meaning of warning code 8350 on my fiat scudo van


i want to reprogramme or change the immobiliser code on my fiat scudo van r reg?

Nov 02, 2008 | 2006 Fiat Strada

1 Answer

The D3 code on my 2007 honda odyssey is on what is the problem


Hi!
This is not a code. Instead it is an indication that you are running the van in "overdrive off" mode.

Your van is equiped with a 5 speed automatic transmission. By running in overdrive off you are essentially running in 3rd gear, out of 5 gears. This will cause your van to run at a much higher engine speed, while not going very fast at all and consuming a lot more gas than normal.

You can deactivate this mode by:
1) start the van
2) Press the break pedal
3) Shift to 'D' (drive mode)
4) press the little button that is located on the left side of the shifter, under the shifter button.

If the light does not go out after pressing this button, you may need to take the van to your Honda dealership. Your van should still be under warranty as it is a 2007 model.

Good luck!

Jul 02, 2008 | 2007 Honda Odyssey

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...