Question about 1987 Chevrolet Monte Carlo

3 Answers

Will a 3:73 posi rear end bolt staight up to a 1987 monte carlo ls

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is the best rear for a pontaic grand prix 86 with a 350 with work

Posted on Dec 28, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

If it came out of the same car it will. If it didn't you need to check bracket and mount positions and drum to drum length. If it fits under the car, brackets can be welded onto new unit to make it fit but pinion angle, centerline and side to side positioning need to be exact. Unless its a fresh 12bolt unit that extra work may not be worth the effort though.

Posted on Oct 01, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

Yes it will but your speedometer will not read right

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY 1987 CHEVY MONTE CARLO LS ENGINE RACES WHEN START IT UP.IT WON'T STOP TILL, MAYBE 7 0R 8 MINUTES


Two places to start. First clean the throttle body/carb. Brake clean and a tooth brush. Clean inside as best and deep as you can, clean the back of the throttle plate and were it seats the most. It will take a few seconds, start the car up and spray the cleaner in the throttle as you rev it up. Then after that, I would replace the engine coolant sensor.

Jun 07, 2015 | 1987 Chevrolet Monte Carlo

1 Answer

Diagram for 1987 rear end monte carlo how to add rear end oil


there is a recessed fill plug on the nose of the diff housing (faces front)

Aug 21, 2010 | 1987 Chevrolet Monte Carlo

1 Answer

1987 Chevy SS Monte Carlo. What tool do you use to remove the valve covers?


Sockets and rachets. If you can't get a socket and rachet on the bolts, then you will have to use a closed end wrench or a box wrench sized perfectly to the head of the bolts.

Aug 08, 2010 | 1987 Chevrolet Monte Carlo

1 Answer

How do you remove the rear back seat to a 2002 chevy monte carlo


Most cars that do not have bolts are hook at the front end of the seat. You need push down really hard on the front end of the seat and pull the seat forward and up. This will unhook the latch. Good Luck

Oct 05, 2009 | 2002 Chevrolet Monte Carlo

2 Answers

Can i change the front end on my 86 monte carlo ls to a ss???


I can't see it being a problem. SS was basically just an option on a platform for all Monte Carlos.Everything from an SS should bolt on or in, depending on how far you go with it. Hope this helps.

Oct 04, 2009 | 1986 Chevrolet Monte Carlo

1 Answer

HOW TO TAKE CHROME TRIM OF THE SIDE OF 1987 MONTE CARLO


on each end of the peice there will be a bolt on the in side of the car you need to remove the inside panels on do the bolts then the rest are plastic clips

Aug 09, 2009 | 1987 Chevrolet Monte Carlo

1 Answer

1987 Monte Carlo


sounds like a heater core "antifreese" leak

Jan 13, 2009 | 1987 Chevrolet Monte Carlo

2 Answers

Replacing the rear axles on my 1987 monte carlo


You will have to remove the rear end cover then turn over by hand you will see a metal pin going through the smaller spider gears in the center there should be a small bolt there with a 5/16 head remove the bolt and then the metal pin then push in ward on the axles and a c plip will fall out only do 1 side at a time and do not rotate the axles other wise the gears will fall out and you will have another problem.

Jan 07, 2009 | 1987 Chevrolet Monte Carlo

Not finding what you are looking for?
1987 Chevrolet Monte Carlo Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...