Question about 2000 Ford Ranger SuperCab

1 Answer

I HAVE A2000 FORD RANGER 4.0V6 AND IT WONT START I HAVE CHECKED ALL FUESE WITH A METER CHANGED BATTERY STARTER IGNITION AND ELECTIC IGNITION BOX UNDER STEERING COLOUM EVERY THING COMES ON BUT WONT START OR EVEN CLICK WONT START

Posted by on

  • Samuel Charles Spriggs May 11, 2010

    Have you tested the starter realy/solenoid? ------------Charlie

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 30 Answers

There are braided metallic bands that help ground your engine. They are usually located at the back of the engine going to the firewall. If they are frayed or disconnected in any way it could be causing the starting problem. Check all your wires for loose connections or corrosion. Hope this helps. God bless!

Posted on Oct 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Had to replace fuel pump relay on 2003 Ford Ranger. Now it won't turn over.Checked all fuses and battery. Could it be anti theft system? Where's valet switch?


Do you mean it wont cranck if so check if you have power on your starter if not change ignition key but before check battery and circuit good luck

Apr 15, 2017 | Ford Cars & Trucks

2 Answers

98 ford ranger 4cyl 5 speed. When u turn the key to on position I get no warning lights on dash except battery light and seatbelt light. Nothing else.truck wont start. Dont even click.


Check the batter voltage first. If not that check fuse panel under hood for a 100 amp fuse check to see if the fuse is bad or if it has power. Also check fuseable link wire at starter to see if wire is still good. If it is bad, internal short possible on starter, take out and test it. Replace fusible link.

Mar 15, 2015 | 1998 Ford Ranger

1 Answer

Ford ranger wont start battery good starter good could it be the clutch safety ...


of course it may be the clutch switch, but may also be anything related to the safty switch (switch, conector @ switch, wires going to the switch) but there is also a fuse for the ignition circiut, check for power on both sides of the fuse with a multi meter or a 12v light prob somtimes fuses look good but have a micro crack in the foil. One more place to look first because its probably easiest to access is check for power on the small leads @ the start solinoid with the key in the start position, just posible the solinoid is stuck or burnt coil.

Sep 22, 2012 | 1989 Ford Ranger

1 Answer

1999 ford ranger wont start had problem with key would rotate truck would start now just wont start


Hey Bill. It could be so many things and any advice without seeing it is just a guess. Could be starter,ignition switch,fuel pump and on and on. if it does nothing when jumping not even turning over then it very well may be the battery or starter. Hope this helps some and good luck.

Aug 12, 2012 | 1999 Ford Ranger SuperCab

1 Answer

Ford ranger 2004 there is no elect.going to pump. I changed the inertia switch --pump still not running.what should I do next ?


Did you check the relay? Power goes from ignition switch to relay to pump. Where B+ stops is your problem.
Run a pair of jumper wire from battery to pump just to see if pump works. If it buzzes and runs its ok.
Then you definately know its something in the control circuit.

May 09, 2010 | 2004 Ford Ranger

2 Answers

91 ford ranger 2.9 super cab: Starter keeps turning/cranking


With fords you have to have to battery tip top condition (a must).
Now when you refer to the starter solenoid, are you talking about the relay on the passenger side fender well. If so, start there.
With the starter wire or trigger wire disconnected, Start running your tests.
Find out if its something to do with the trigger wire or if it has to do with the relay.

Apr 17, 2010 | 1991 Ford Ranger Supercab

1 Answer

Ford ranger not starting


check the main fuse, and relay, if ok check for power to the starter solynoid if yes then starter may be faulty. check power to switch also

Jul 22, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

I have power but my 1990 ford ranger clicks loudly and wont turn


Starter could be stuck..
If you are SURE you battery is fully charged with no dead cells..
Try --
(takes 2 peopl) -
Turn the key like you are trying to start it.
At the SAME time - smack the starter with a small hammer not too too hard..
Let me know what happens..

Jul 09, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...