Question about 1992 Oldsmobile Cutlass Supreme

1 Answer

How do I adjust the rear cliper emergency brakes.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 75,817 Answers

You adjust the park brake cable not the brakes, the adjustment is under the car on the drivers side.

Posted on Sep 30, 2009

Testimonial: "yes very. Thankyou,"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Park brakes don't work when i pull them up


Have your rear brakes inspected for excessive wear and to make sure the E-Brake Cable is not broken.

Jun 04, 2015 | 2003 Ford Windstar

Tip

Removing rear rotors


On the rear wheels, the inside of the rotors act as a drum for the emergency brake shoes. You must loosen the emergency brake so that the shoes back away from the inside walls of the rotor. Loosen the emergency brake, left and right side, by loosening both nuts at the emergency brake handle. Further, the emergency brake's internal adjusting nuts are accessible through the lug holes in the hub. Then remove the rear rotors

on May 19, 2008 | 1987 BMW 5 Series

1 Answer

How to adjust parking brake


Depends if there is rear disc brakes, if so the emergency is self adjusting, if there is drum brakes you can adjust the emerg buy the adjuster cable that runs between both rear wheels.

Jan 27, 2011 | 2003 Buick Park Avenue

1 Answer

I replaced my rear brakes. Does the emergency brake automatically adjust itself?


Yes.....and no. Emergency brake should have been checked during brake pad replacement.
Most do adjust to new pads...ie: return to factory adjustment setting due to new pads .

The E brake lever should be applying braking to the wheels after three clicks are heard during application of the Emergency brake.

Lift rear of car and apply emergency brake to the third click. Now both rear wheels should drag equally but not be locked up.
.
If not, adjustment required.

However, late model cars need a scanner to pull back the pistons and install pads.

Jan 12, 2011 | Toyota Corolla Cars & Trucks

1 Answer

Adjusting the parking brake on 03 pontiac vibe


If you look under the van on the driver side (usually) you'll see where the two cables from the rear inter-connect with the main cord to the front. Here, you should find an adjustable bolt that you can tighten. If it is not here, it may need to be tightened from there rear tires.

If you have drum brakes in the rear, these are most likely "self-adjusting" brakes, which may interact with the emergency brake. Everytime you back up, and apply the brakes, you are activating the self adjuster (you would have seen this located at the bottom of the brake system between the two brake pads. This is the self adjuster. Try going in reverse at about 5 miles per hour, and hitting the brakes firmly (not slamming on them). Drive forward again, and firmly press the brakes. Go in reverse again, and apply brakes firmly again; (do this about 4 or 5 times to get the rear brakes adjusted). Try the emergency brake again and if still not tighter, purchase or look in your repair manual as to how to adjust the emergency brake.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

May 29, 2010 | 2003 Pontiac Vibe

1 Answer

How do I adjust emergency brake cable on 1999 ford taurus. I replaced rear brake pads, cylinders and drums, but now have no emergency brake so need to know how to adjust.


FIRST adjust rear brake starwheel while spinning tire FOWARD. then alongside drivers side of car find emergency brake cable adjustment (long threaded rod with nut) . hold one end of rod with vise-grips and turn nut until emer. brake cable has less slack in it. now go inside car and apply e-brake.you dont want the pedal to stop right away but u also dont want too much"travel" in the pedal.so about halfway is IDEAL. IMPORTANT- once the brake cable is adjusted and the car wont roll foward in gear with the brake on and applying a little "gas"-make sure with brake OFF that rear wheels turn freely. hope this helps.

Jul 23, 2009 | 1999 Ford Taurus

1 Answer

2003 silverado HD adjust emergency brake cable?


first you need to check the rear brakes ,the emergency brakes work off the rear brakes, there is an adjustment on the center of cable that goes between both rear brakes,hope this is some help,thanks robert b.

Jul 06, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

When I push in on my emergency brake is does not activate.


There are two main ways to adjust your brake. 1) adjust bracket on the frame rail (driver's side). 2)adjust rear shoes. check for proper movement of all arms and brackets on rear shoes.

May 21, 2009 | 1995 Ford Ranger Supercab

1 Answer

Emergency brake on a 2002 Caravan


There should be a cable running underneath the car along the rear axle from one wheel to the other that connects to the cable running to the front emergency brake handle.

Follow the cable until you find the adjustment screws and turnbuckle on the cable.

Loosen the screws holding the turnbuckle tight.
Adjust the turnbuckle until the cable is tight.
Test the brake handle and readjust if necessary.

Some cars have auto adjusting rear brakes which will sometimes re-seat by running in reverse and pushing on the brake several times. Try this first!

If none of the above works, you will have to take off the rear wheels and adjust the brakes manual at the wheel hub.

jackiaria

Feb 28, 2009 | 2002 Dodge Caravan

1 Answer

Emergency brakes adjust


first, jack up the rear and adjust the brake shoes themselves, then you may have to adjust the e-brake cable underneath.. sometimes the adjustment is on the e-brake handle....

Jan 17, 2009 | 2006 Ford Freestar

Not finding what you are looking for?
1992 Oldsmobile Cutlass Supreme Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...