Question about 2007 Subaru Impreza WRX Sport Wagon

Open Question

How to change a wheel bearing on a wrx . i am unsure the best way to repack my bearings.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 110 Answers

SOURCE: 1993 Subaru Loyale Wheel Bearing Gone

Take it to a machine shop with a hydralic press, or find a big socket that fits on the OUTER bearing race and tap tap tap it out.   Don't tap on the inner race as you will just blow the bearing apart with the outer race still stuck.  If you go to the machine shop, have them press the new bearing in, otherwise you will need to be careful with the caveman approach to installing it not to get it cocked sideways or hammer on it much.

Posted on Nov 01, 2008

Puterwiz82
  • 60 Answers

SOURCE: 2002 Kia Rio rear wheel bearing passenger side

I'm from the United States, East coast.

Posted on Nov 24, 2008

  • 289 Answers

SOURCE: How to replace front wheel bearings in 2006 nissan sentra

hi..check on the following link to replace the
wheel bearings.
http://autorepair.about.com/od/fixityourself/ss/wh_bearing_old.htm
check it out..
thank u..
rate me..

Posted on Mar 06, 2009

emissionwiz
  • 75197 Answers

SOURCE: Change front wheel bearings

u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

3bcf37f.jpg

Posted on Mar 12, 2009

  • 51 Answers

SOURCE: how to change a wheel bearing in a 2002 subaru wrx

i assume we are talking about a press in bearing. they sell a tool called a hubshark or hubtammer they are both the same thing and they allow you to change the bearing with out removing the knuckle. just unbolt the lower ball joint and pull the axle out of the way but use a slide hammer to remove the hub before you unbolt the lower ball joint. then press the bearing out of the knuckle with the tool i mentioned above or take the whole knuckle up to a parts store that can press the bearing out for you carfull of the abs exciter ring if equiped its easy to break.

Posted on Mar 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I grease the wheels and what brand grease do I buy?


If you are repacking front wheel bearings on a car with disc brakes,you will want to buy wheel bearing grease suitable for the higher heat generated by the disc brakes.Any name brand wheel bearing grease will work as long as it is rated to be used on vehicles with disc brakes.
TIP: Do not wash the wheel bearings in solvent to clean them if they are in good shape and have no metallic particles in the existing grease.Just repack using the new grease to push the old grease out of the bearings.After wiping the hub clean add some clean grease evenly into the hub,install the repacked bearings and new seals and JUST SNUG the nut which adjusts the bearing and install a NEW cotter pin.

Apr 08, 2017 | Cars & Trucks

2 Answers

Does a2009 Ford Ranger have wheel bearing adjustments?


yes you sure did could have done it yourself the hardest part is taking the tire off.

Aug 25, 2016 | 2009 Ford Ranger Regular

1 Answer

Mazda mpv 2006 repack wheel bearing


There is a little difference between the front and rear. The days of packing wheel bearing is almost over. The front bearing you have to pull the hub and change to bearing. The rear wheel you have to change out the hub bearing and all. The front is a sealed bearing and not serviceable. Please rate my answer so I am rewarded points for it.

Jan 29, 2012 | Mazda Cars & Trucks

3 Answers

Is there wheelbearings in the rear wheels


go to autozone website and register your vehicle. look under do it yourself intermediate and look at the suspension...rear. probably has a hub assembly that has to be changed. i was just on site looking at one for an 04 grand prix. hope it helps you.

Nov 28, 2010 | 1993 Plymouth Voyager

1 Answer

Do i need any special tools to change hub bearing on a 95 honda passport


No special tools needed, this Honda has the old type inner and outer wheel bearing's, remove cotter pin, spindle nut slide rotor out, remove wheel bearing, repack new bearing with grease and don't forget to replace grease seal's, install new part's adjust spindle nut and install cotter pin.Good luck,hope this was very helpful.

May 13, 2010 | 1995 Honda Passport

1 Answer

I get a vibration as im driving possible from the rear wheel


a) Wheel Balance.
b) Wheel Alignment
c) Wheel Bearing.
My best guess is a wheel bearing needing replacement. If there is only noise, then MAYBE repacking of bearings. However with vibrations, the wheel bearing(s) need to be replaced. Make sure you replace both the bearing and races as a set.
Let me know if this helped or if you need additional help.

Dec 09, 2009 | 1992 Plymouth Acclaim

1 Answer

How do i get at, and change the rear wheel bearing in my 1999 dodge durango


Wheel bearing should be permant packed. However if you wish to tackle the job. Remove the wheel, remove the cap, remove the carter pin, remove the bearings. Clean, repack new bearings and reasemble. But, before you do check with any auto repair shop or Dodge dealer, bearings may be permantly sealed.

Jun 10, 2009 | 1999 Dodge Durango

1 Answer

Can my front bearings be repacked or are they sealed and need to be replaced?


no they can not be they must be replaced they are sealed bearings

Apr 22, 2009 | Kia Sportage Cars & Trucks

2 Answers

What needs to be done to remove & repack wheel bearings? Left front is starting to make noise


Almost all newer cars the front wheel bearings are a sealed unit. There isn't a way to remove and repack like the old style bearings. More than likely if it gets too bad, you will need to replace the hub assembly.

Mar 20, 2009 | 2006 Ford Five Hundred

Not finding what you are looking for?
2007 Subaru Impreza WRX Sport Wagon Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...