Question about 2001 Dodge Grand Caravan
How to determine the error p0107 and p0108
P0107/108 is a MAP error .. thats manafold absolute pressure .. or in the old days we just called it vacuum .. the MAP sensor measures the vacuum in the intake manafold and that information is used by the computer to adjust the fuel mixture and ignition timing ... if the MAP sensor output is too low ot too high then it will trigger an error .. also if it doesnt agree within reason with the throttle position sensor ..that will also trigger an error .. look for a clogged air filter, a bad vacuum leak or just a bad MAP sensor ..
Posted on Oct 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 24, 2015 | Cars & Trucks
Jun 11, 2014 | 2004 Nissan Titan
Trouble Code: P0128
Trouble Code Conditions: DTC P0107, P0108, P0112, P0113, P0116-118, P0335, P0336, P0300-P0306, P0401, P0505, P1106-P1108, P1259 and P1519, engine running at road load for 10 minutes, and the PCM detected the ECT sensor input did not reach the correct closed loop value. Note: It is possible for this code to set if the engine is left running while the hood is open for an extended period in a warm climate.
Inspect for low coolant level or for an incorrect coolant mixtureCheck the operation of the thermostat (it may be stuck open)TSB 01-064 (9/11/01) contains a repair procedure for this code
Jan 27, 2013 | 2001 Honda Civic 1.7
Sep 21, 2011 | 2001 Ford F350 Super Duty SuperCab
Jun 21, 2011 | Dodge Caravan Cars & Trucks
May 31, 2011 | Honda Odyssey Cars & Trucks
Manifold Absolute Pressure (MAP) sensor measures the changes in the intake manifold pressure which result from engine load and speed changes, and converts this measurement into a voltage output.
A closed throttle on when the engine is decelerating would produce a relatively low MAP output, while a wide open throttle would produce a high output. Manifold absolute pressure is the opposite of what you would measure on a vacuum gage. When manifold pressure is high, vacuum is low. The MAP sensor is also used to measure barometric pressure under certain conditions, which allows the PCM to automatically adjust for different altitudes.
The PCM sends a 5 volt reference signal to the MAP sensor. As the manifold pressure changes, the electrical resistance of the sensor also changes. By monitoring the sensor output voltage, the PCM can determine the manifold pressure. A higher pressure, low vacuum (high voltage) requires more fuel, while a lower pressure, higher vacuum (low voltage) requires less fuel.
A high or low voltage fault in the MAP sensor circuit should set a DTC P0107 or DTC P0108. If the MAP sensor sends an intermittent zero voltage signal to the PCM, a DTC P0106 will set.
Oct 13, 2010 | 1998 Chevrolet Malibu
Aug 06, 2010 | 1997 Chevrolet Venture
Jan 18, 2010 | 1997 Oldsmobile 88
May 03, 2009 | 2000 Dodge Durango
Apr 26, 2015 | 2001 Dodge Grand Caravan
955 people viewed this question
Usually answered in minutes!