Question about 2000 Buick Century

1 Answer

How do I remove and replace air filter on Buick LeSabre 2000

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 546 Answers

Air filter is located in a 'black box' connected by a flexible tube to the intake on engine.spring loaded wire clips at the sides of the box clamp the lid in place.release clips,lift lid to access filter.

Posted on Sep 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Self auto repair for 2000 Buick Lasabre

more than likely there are 2 filters in the system 3 if you count the 1 in the tank the 1 most often replaCED IS NORMALLY LOCATED ON THE DRIVERS SIDE AROUND THE BACK DOOR underneith car

May 24, 2014 | 2000 Buick LeSabre

1 Answer

2000 Buick Lesabre hard start

Try depressing the gas pedal once before cranking. If it fires right up then replace the fuel filter. If not then you may need to replace the cam sensor.

Feb 20, 2013 | 2000 Buick LeSabre

1 Answer

Replacing air filter on 2000 buick lasabre

To change the air filter disconnect the electrical connector on the large hose that runs from the air filter assembly to the throttle body assembly. Slowly and carefully remove the large hose from the throttle body and air filter assembly. Some of the 2000 models have spring type clips holding filter cover while others have two screws. Either unhook the clips or ree.move the screws and lift the cover. You'll see the filter element. Remove and replace it. Reverse order to reassembl

Sep 14, 2010 | 2000 Buick LeSabre

1 Answer

How change an air filter on a 2000 buick lesabre

Your air filter is inside your airbox (the big black box on the drivers side of the engine compartment) There are some clips that hold the cover on unclip the cover and pull the airfilter out

Mar 18, 2010 | 2000 Buick LeSabre

2 Answers

My car was diagnoised with a bad air flow sensor

the mass air flow sensor is located under the top plastic engine cover. to remove this un screw the oil filler tube by hand and remove the top cover. its just to the right of center engine. unplug this sensor. next it has two screws to take this off. It is not standard screws so look at it. remove them and replace sensor. After install go to autozone and have the warning code removed. This is done free. 2000 buick lesabre

Sep 18, 2009 | 2000 Buick LeSabre

1 Answer

Replace engine air filter

Hi pastore -

Changing an air filter is generally an easy task to perform. Pop your hood and look for the air intake tube. This tube (sometimes more of a labrynth) runs from your throttle body to the "air-box". You can locate the throttle body by having an assistant push and release the gas pedal (while car is off) while you look for moving parts under the hood. The mechanism that moves when the pedal is depressed is the throttle body. Now trace the intake tube (large tube/hose) from the throttle body down to the air-box. The air filter will be located within the air-box. The box usually has a series of clamps that hold a cover in place. Release all of the clamps and lift open the cover to expose the air filter. The air filter should just be sitting in the air box - should be easily removed by lifting the filter element upwards. The new filter should simply drop in place of the old one. Reclamp the cover and you're good to go!.

Please let me know if you need more clarification!

Mar 24, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Buick Century Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides