Question about 2001 Chevrolet Blazer

2 Answers

Checked why engine light was on and it gave code P0410 Secondary injection system. to me this is very vague. can you help?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

That code indicates a problem w/ the air injection system, a part of the emissions system. you should check the air pump, solenoid, check valves and vacuum hoses of that system. the emissions sticker under the hood should give you a detailed enough diagram of where the components are

Posted on Sep 30, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

This link lists several possibilities for you to explore. sounds like a fuel air mixture problem.

http://workshop.search-autoparts.com/_code-P0410/blog/420033/31710.html

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a service engine soon light on and have hooked up an OBD11 reader to it and got code P0410 pertaining to a secondary air injection problem. hoses are fine, pump is new.


P0410 Oldsmobile - Secondary Air Injection System Malfunction

Possible causes: - Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed

Tech notes: Visually inspect AIR pump and AIR bypass valve harness and connector, if connector are OK, then replaced AIR bypass valve.

When is the code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

P0410 Oldsmobile Description An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
P0410 Oldsmobile Secondary Air Injection System Malfunction

May 30, 2015 | 2001 Oldsmobile Intrigue

2 Answers

What does this code mean? P0410


Diagnostic Test Code (DTC) P0410 indicates that your secondary air injection system is not functioning properly.
Not all 2001 Chevrolet Bazers are equipped with secondary air injection. The secondary air injection system was added to vehicles that were to be sold in certain areas where the emissions laws required it, like the State Of California.

The Powertrain Control Module (PCM) monitors the system by commanding the secondary air blower motor to run and the air injection solenoid to open. This causes additional oxygen to enter the exhaust system. The PCM then monitors the signal from the oxygen sensors to see if the commanded air has in fact, entered the exhaust system. Code P0410 sets when the PCM has commanded the blower motor on and the solenoid open and there is little or no change in the oxygen sensor signal.

GM has had some problems with these systems and there has been a Technical Service Bulletin (TSB) issued that addresses some of the known concers. Below is a brief description of the TSB and the issues involved.

Bulletin No.: 04-06-04-015A
Date: November 28, 2006
TECHNICAL
Subject:
LN2, L43 or L35 Engine SES/MIL Light Illuminated, AIR Pump Ingesting Water and DTC P0410 Set (Replace AIR Pump and Inlet Hose Assembly)
Models:
1999-2003 Chevrolet Blazer, S10
1999-2001 GMC Jimmy
1999-2003 GMC Sonoma
1999-2001 Oldsmobile Bravada
with Vortec 2.2L I4 or 4.3L V6 Engine (VINs 4, 5, W - RPOs LN2, L43, L35)
Condition
Some customers may comment on the SES/MIL light being illuminated. Upon investigation, the technician may find a DTC P0410 indicating that there is a concern in the secondary air injection system.
Cause
Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump.
Correction
Replace the AIR pump and install a new inlet hose and solenoid tube assembly...

The bulletin goes on and gives detailed information on how to perform the repair and the part numbers of the replacement parts needed to do so. Your local dealer can provide the parts for you and you can probably get them to print out a complete copy of the bulletin for you. It is not really hard to do if you want to do this yourself.

Sep 01, 2011 | 2001 Chevrolet Blazer

1 Answer

Am looking for what the carmd code p0410 means for a 2004 buick ranier - my car md is not working right.


CEL light/code P0410, secondary air system fault.
DTC P0410 - Secondary Air Injection System

Suspect -
Relay/fuse (box B) loc 3 ,15amps
Pump $434(new) / $243 (Remanufactured) / $95 (used,Ebay)
solenoid $73
check valve $18
http://www.autopartswarehouse.com

A new pump, or simulator!

What signals the ECU, if the seconary Air Injection system isn't working?
H20 sensors, if running rich > Xtime throw code!
The pump only runs when the engine is cold, so the air & rich fuel mix is burnt in the exhaust manifold, so there's less Emission.

May 09, 2011 | 1997 Volvo 960

1 Answer

Check Engine ight


Hello there:
Here is the code
P0410 Secondary Air Injection System Malfunction
It is another air pump that pushes air into the exhaust so the cats can burn more pollution.. It does not affect drive train, just emmisions it shouldnt cost about $400 if it is the air pump, Unless there is a secondary problem, ok?
Hope this helps you out
Best regards Michael

May 30, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Engine light code P0410


a po410 code is, Secondary Air Injection System Malfunction.

Jan 30, 2010 | Saturn SL1 Cars & Trucks

2 Answers

Check engine light on, diagnostic code 0128 and 0410 keep coming up


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

P0410 - Secondary Air Injection System Malfunction
(has to do with exhaust system)

Note: There is a technical service bulletin (TSB) regarding code P0410 for a number of GM models. The TSB calls for the replacement of the AIR pump and the installation of a new secondary injection hose.

Oct 13, 2009 | 2005 Chevrolet TrailBlazer

2 Answers

Check Engine Code


P0410 is a problem in the secondary air injection system. there are many thing that can cause a check engine light in this system.
p0416 does not come up in any of my charts.
Tech JK
----------------

Jan 24, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Get diagnostic code of P0410


Secondary Air Intake System Fault code P0410 is set by a defective air injection pump, this pump is electric, on older cars it was called a "SMOG PUMP" and was belt driven by the engine. On cold start do you hear a hair dryer type noise from under the hood? if not the pump has failed, if you do the check valve is stuck closed, the only way to fix either issue is a new secondary air injection pump.

Aug 21, 2008 | Volvo XC70 Cars & Trucks

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...