Question about 1996 Mitsubishi Eclipse

1 Answer

How to get driver door off

The bottom hindge is really loose. I'm trying to get the bottom hindge off from the inside. The two bolts only come out a certain amount then stop. What do I do?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Get a bigger hammer ;)

Posted on Oct 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove front door panel


simple really: locate window crank handle if equipped (non power) gently pry out plug from center use torx driver to remove bolt from center , use same driver to remove bolt from door handle well , and behind door handle (inside) then panel should be loose and lifting up (off lock pin) should move out enough to access plug (if power window equipped) if not panel should lift straight up . and off , mind the clips that are located all four corners (keep them) this should allow you to see the inside of door (plastic covering ) and see what the cause of window off track is , most times its cause is a door drain clogg and now rust has broken off the front mount point of glass rail

Jan 20, 2016 | 2003 Ford Explorer

1 Answer

WHERE IS TRUNK RELEASE INSIDE OF CAR?


We need to know Year, Make & Model of the car.
I'm assuming that u r missing the vehicle book and haven't called the dealership.
JIC: it's normally located on the driver side, somewhere near your left knee.
It could be on the "kick-panel" (under the dashboard, on the side of the interior wall, forward of where the driver-door hindges).
It could also be on the floor near the driver side car seat. Look around, @ the front left area of the car seat where the seat bolts to the floor. Possibly btwn. the seat and the door.
Also, look up, under the bottom left side of the dashboard. It will look like a small square that u will pull down.
Some vehicles have a button that u push. Some will b in the driver-side door panel, some older vehicles have this button in the glove-box.
Finally, there might be a trunk button on your car remote/dongle.
Hope this helps

Aug 13, 2015 | Cars & Trucks

1 Answer

I have a 2003 volkswagen jetta. i need to remove the glass on the front drivers side and front passenger side doors and replace it with new glass.after i remove the door panel how do i do this?


The panels have 3 t20 torx screws on the bottom and one philips head near the mirror. Under pull handles there are 3 philips on the drivers and 2 philips on the passengers sides. Pull the panels from the bottom and lift the panels up. There are 2 black rubber plugs in each door, pop each plug out and the glass is held in place to the clips on each side with either a 10 mm bolt or t30 torx bolt. Move the glass to the point where you can see the bolts, loosen, but don't remove the bolts. Once loose, you can pull the glass loose. Once loose, lower the window a bit, angle the rear of the glass up and pull it out. The glass may be epoxied in place, as VW had a problem with windows coming loose. If so, try to pop the rubber in the clamp loose (above the bolts you see through the holes) and reinstall it with the window removed.

Dec 22, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Door adjustment having to lift driver door to shut it


if there are no bolts in the hindge to adjust then you have to take out the pin and there are brass or steel bushing you just
hamer out old ones and tap in new ones

Sep 19, 2010 | 1995 Mercury Cougar

1 Answer

Driver window seems to be out of track it's pushing out wards instead of going straight up? 94 honda civic..


you've got to take the door panel off and check out what's going on inside there. there are bolts that hold the bottom of the wondow. chances are it's just a loose bolt.

Feb 02, 2010 | 1995 Honda Accord

1 Answer

How to change front driver side door hindge


You merely open the door, and unbolt the bolts/nuts from the frame. You could support the door on a small table while you remove the hinge-bolts. You may have to get into the door panel to disconnect the wiring plugs.

Nov 17, 2009 | 1993 GMC Suburban

1 Answer

Do I have to completely remove the fender to replace the driver side door The hindges are broken and I was told it would be easier to replace the door. I have a door and i hope it won't take all weekend to...


no the fender can stay on but i would mark the bolts then remove the fender to have more room to work. if you mark the bolts before you take them out it is easier to allign the fender

Oct 22, 2009 | 1990 Plymouth Voyager

2 Answers

I own a 1994 honda accord and the window pane jams and goes off alignment when I winding it up,atimes it will stop working and cant wind up. How do I fix it?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.Then you need to pull off the weather seal to get to the inside of the door. It sounds like the guide rails for the window have come loose

Aug 21, 2009 | 1994 Honda Accord

1 Answer

Can't open door


inspect the door hindge pins and busings it sounds like they are getting worn out and maybe due for replacement. also look and see if the spring in the hindge is still their. if all is well have the door adjusted properly to repair your problem.

Mar 22, 2009 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...