Question about 2000 Ford Excursion

1 Answer

Front hub to lock in to 4 wheel drive is locked and wont move. 2000 ford excursion v10 on one side only, is this a ford only part?? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

This is common. the locks due tend to freeze up and need either a greasing or replacement. I do suggest automatic locking hubs that you don't have to turn yourself. You can get the part almost anywhere

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford f250, four wheel switch locked in in cab, no front wheel drive, lock in both front wheel hubs and now have 4 wheel drive. Flip off switch inside and no longer in 4 wheel drive.


I really don't know quite how to tell you this. Everything seems to be working just fine buy your question. When your using 4 wheel drive, you engage the hubs first, then push the 4 wheel drive button or turn the switch. Ease it in and out of gear or shift on the move and you should be in 4 wheel drive at this point. To take it out of 4 wheel drive, reverse this procedure. Turn the switch off and ease forward and you will be out of 4 wheel drive. If your not going to use your 4x4, turn the hubs out to reduce ware on the axles. If you will be using 4x4 again soon, leave the hubs in and all you have to do is turn the switch to 4x4 and your set to go. I hope I explained this well enough. Good luck.

Feb 10, 2015 | Ford Cars & Trucks

1 Answer

How to engage 4x4 in a 94 ford exploer (auto trans) mauale hubs


Before you start the vehicle lock the hubs in by turning the lock out device in the hub center of each front hub. Now you can start the vehicle and while in park or neutral move the range selector on the floor to the range you would like to use. Most often you will use the 4 wheel high setting. The low setting is only for extremely heavy pulling and will throw you across the seat if you accelerate too hard. Never exceed 45 miles per hour when in 4 wheel drive as you will burn out the transmission or 4X4 transfercase bearings. Now to go back to two wheel drive. Move the floor selecter back to 2 wheel drive setting. Do this with the vehicle in park or neutral to prevent damage to the vehicle. Now you can unlock the hubs by reversing the hub lock out device in the center of the two front hubs. Important little known fact is that you do not want to drive aroind with the hubs constantly locked in as you will lower your fuel mileage and cause extra wear to the axles and associated parts. Hope that helps, please come see us again if you have any more questions, Thanks, Rich.

Nov 21, 2010 | 1994 Ford Explorer Limited

1 Answer

Locking hubs Problem on an Excursion, or steering issue


it sounds like your hubs are going bad. when you disengage your 4x4 try backing up a few feet. this might help them release

Dec 21, 2009 | 2000 Ford Excursion

1 Answer

4 wheel drive does not engage and the hubs stay locked


ya might need a new transfer case or the front axle might need re-built

Dec 02, 2009 | 2000 Ford Excursion

2 Answers

Was driving onto a paved access road to beach. put switch in 4 hi about 40 yards from sand , increased speed to about 10 mph heard a sudden bang in front of truck. Truck came out of 4 wheel. 4 wheel lights...


Your automatic locking hubs are broken. Very common on ford trucks. The front hubs are geared with hard nylon gears, and are easily broken. If you replace your front hubs with "warn (name brand)" manual locking hubs, your issue will be resolved, and you won't have that issue again on your truck.

If you replace the hubs with manual locking hubs, you will have to stop, get out of the truck, and manually lock in your hubs every time you want to engage your 4 wheel drive. It beats getting stranded somewhere with no 4x4 at all; like you have now.

If you replace your hubs with the factory automatic locking hubs, the issue will return again in time.

May 26, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Ford 4x4 frint wheels wont engage


if you look there is probably only one axle shaft turning also that shaft should not turn unless the wheels are there is probably something wrong with that hub not a big problem to tear down and check you can also get replacement hubs that are manual locking.

Dec 30, 2008 | 2003 Ford F150 Regular Cab

1 Answer

4x4 not locking in


check the vacuum lines going to the hubs and make sure the hubs are locked in

Aug 28, 2008 | 2000 Ford Excursion

Not finding what you are looking for?
2000 Ford Excursion Logo

Related Topics:

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...