Question about 1996 Chevrolet Blazer
The hardest thing you will enconter is the ac braket will not let you get at 1 intake bolt remove the 4 ac compressor bolts set the compressor off to the side by the battery do not disconect the ac lines now you will see 3 bolts that go into the front of the braket thak them out now it is a little lose but not complete 3 more nuts one is the front exhaust man nut then 1 more under that now 1 more but you may not have to take this one out it is very low in the front under the 3 that you took out first
Posted on Dec 29, 2009
There really isnt. you have to disconnect everything bolted to it and lift it off. I would leave everything bolted to it and just disconnect hoses and wires. Everything you unbolt from it you will have o reseal the bolts when you put them back in which means cleaning or replacing each one.
Posted on Oct 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 28, 2015 | Cars & Trucks
Jan 17, 2014 | Chevrolet Blazer Cars & Trucks
Nov 22, 2011 | 1996 Chevrolet Blazer
Jan 03, 2011 | 2000 Chevrolet Blazer
Dec 12, 2010 | 1997 Chevrolet Blazer
Fig. 1: Intake manifold installation-4.3L engines (click over image for zoom)
Fig. 2: Intake manifold bolt tightening sequence-1996-98 4.3L engines
Install the bolts and tighten in sequence and in 3 steps as follows:
Dec 08, 2010 | 1998 Chevrolet Blazer
Apr 21, 2010 | 2002 Chevrolet Blazer
Feb 20, 2010 | 1996 Chevrolet Blazer
Feb 05, 2010 | 1998 Chevrolet Blazer
Aug 10, 2009 | 1996 Chevrolet Blazer
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: