Question about 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer what is the easiest way to change intake manifold gasket

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

The easiest way is to remove egr, throttle cables, and disconnect gas line and wire harness. then remove the bolts

You can go to autozone.com and register for full free online repair manual with all the info you could need for this blazer. Much better than the books.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Chevy blazer with a 4.3 vortec motor it has a small leaking head gasket how long can I drive it until I have the money to fix it.


Troubleshooting a Blown Head Gasket (GM 4.3L, 5.0L, 5.7L)

troubleshootmyvehicle.com > GM > 4.3L, 5.0L, 5.7L
Mar 28, 2011 - There are so many ways to test for a blown head gasket on your 4.3L, 5.0L, 5.7L GM van (or mini-van, pick up, SUV) that it can get confusing.

Chevy Blazer Coolant Leak (Intake Manifold) - YouTube

? 4:33
https://www.youtube.com/watch?v=SC4VXdt5wiE
Oct 9, 2013 - Uploaded by eyetotheworld
I have localized a coolant leak on my 2003 Chevy Blazer to thegasket of the intake ... Turns out that this is common among this particular engine both in the v6 & v8 sizes. ... The guy has been generous to detail his projects. ... 98 S10 Vortec V6 4.3 IntakeGasket Replacement Part 1 of 5 - Duration: 18:17. by ...

Chevy 4.3l v6 oil leak issue 2001 Xtreme Blazer - YouTube

? 6:11
https://www.youtube.com/watch?v=Y8Ogd5voIYs
Nov 12, 2011 - Uploaded by smiatacz
This darn little engine just keeps going. ... I have a 2003 chevy blazer and the oil cooler line from the oil filter to ... I have a 95 Chevy s10 v6 vortec 2wd that is slightly dripping oil out of agasket ... I'm having same problem 2001 Chevy Blazer 4x4 (not xtreme) not sure if those same bolts are missing on mine.

Dec 28, 2015 | Cars & Trucks

1 Answer

1994 chevy blazer stalls when accelerating


you may have put the gasket on incorrectly and its lacking air ???

Jan 17, 2014 | Chevrolet Blazer Cars & Trucks

1 Answer

I have a 1996 chevy blazer it is running real hot and have had to put in antifreeze every other day for the past two weeks, no visible leak that I can see seems like it is just evaporating. Any ideas on...


sounds like you have a leaking head gasket or intake gasket problem , for starters change out the thermostat first,if that dont work then move on to the gaskets

Nov 22, 2011 | 1996 Chevrolet Blazer

1 Answer

I HAVE ANITFREEZE LEAKS FROM MY 2000 CHEVY S10 BLAZER. IT'S HARD TO TELL BUT THE LEAK SEEMS TO BE COMING FROM UNDER THE MOTOR RATHER THAN FROM THE RADIATOR OR ANY HOSE I CAN SEE.


a common V6 failure is the intake manifold gasket. coolant will usually leak behind the water pump on the drivers side, however it can leak at other locations on the intake manifold gasket.

coolant leaks from other areas include the heater core, hoses, expansion plugs, trans cooler, and coolant overflow tank.

Jan 03, 2011 | 2000 Chevrolet Blazer

1 Answer

I have a 1997 Chevy Blazer that is overheating and is leaking coolant. It is not the rad hose because I have already checked that. It is a part that is attached to the engine block, directly above the...


Ihave a 96 s10 lt blazer First of all the steering coloum is now where near the engine block and the bracket you mention is for the throttle cable and the cruise control cable and has no gasket for any kind of a seal with the intake manifold. The 4.3 and most chevy engines have a problem with the intake manifold gaskets if you are over heating then likely the intake manifold gasket is leaking you should check your engine oil for antifreeze that will look like a fomey white yellowey residue and also check the radiator for engine oil floating on the top under the radiator cap. This is a big problem with chevy you can't let espesecly the 4.3 ever over heat.There is olny 8 bolts that hold the manifold to the block and there all in the four corners nun in the middle Y ou can save the engine if you fix it now but it is the intake manifold gasket that is leaking

Dec 12, 2010 | 1997 Chevrolet Blazer

1 Answer

What is the torque specifications and sequencing for the intake manifold on a 1998 Chevy blazer?


zjlimited_198.jpg

Fig. 1: Intake manifold installation-4.3L engines (click over image for zoom)


zjlimited_200.jpg

Fig. 2: Intake manifold bolt tightening sequence-1996-98 4.3L engines

Install the bolts and tighten in sequence and in 3 steps as follows:

  1. First step to 26 inch lbs. (3 Nm).
  2. Second step to 106 inch lbs. (12 Nm).
  3. Final step to 11 ft. lbs. (15 Nm).

Hope this helps (remember to rate this answer). Good luck.

Dec 08, 2010 | 1998 Chevrolet Blazer

1 Answer

Intake manifold 1996 Blazer S10


do you mean the valve cover ? because I don't think you can have the intake manifold backward.(if it's backward, you cannot connect the upper hose and the fuel lines)
so any way, it sound like you have the valve cover swapped. it won't hurt to drive but it is a problem to fill the engine oil as you stated.

Apr 21, 2010 | 2002 Chevrolet Blazer

1 Answer

Top right front of the engine is leaking antifreeze but it is not the hose or water pump.


gasket from-[intake manifold -water pump]also check the heater hose connection on the intake manifold has a tendency to leak

Feb 20, 2010 | 1996 Chevrolet Blazer

2 Answers

1996 chevy blazer what is the easiest way to change intake manifold gasket


there really isnt. you have to disconnect everything bolted to it and lift it off. I would leave everything bolted to it and just disconnect hoses and wires. Everything you unbolt from it you will have o reseal the bolts when you put them back in which means cleaning or replacing each one.

Sep 30, 2009 | 1996 Chevrolet Blazer

1 Answer

Trying to locate the wire to reset timing on 1996


Try the inside passenger side, below glove box, near heater box. Brown wire with a plug.

Aug 10, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...