Question about 1999 Chevrolet Blazer

1 Answer

I have a 1999 chevy blazer with a 4.3l I took the

I have a 1999 chevy blazer with a 4.3l I took the motor out and had it rebuilt now the check engine light is on and it is for the heated o2 sensor bank 1 sensor 1 replaced all 3 sensors and the light is still on looking for a wiring diagram for the o2 sensor

Posted by on

  • Steven A
    Steven A May 11, 2010

    what is the code?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Sounds like you know what you are doing, sometimes the codes have to be removed after repair, i'm not sure whether or not your vehicle requires this. If it is just a light bothering you try and clear the code and see if it comes back. Some Advance Auto or O'reilly has a tool to do this free of charge

Posted on Oct 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 02 blazer i want to put a motor out of a 98 in it will it interchange


Chevy Blazer Engine Swap Part 1 of 2 - YouTube

? 10:29
https://www.youtube.com/watch?v=Dt_7AKP2WcI
Aug 13, 2011 - Uploaded by Dave R
Replacing the engine in a mid-size Chevy Blazer 4x4 with oneout of a Jeep Cherokee 2wd. Original engine was low and motoroil and spun a bearing. ... Chevy Blazer Intake Gaskets Replaced & Cooling System Rebuilt - Duration: 16:45. by ... 4:02. 94 4.3l Vortec V6 GM (black motor) - Duration: 6:01. by ...

4.3 vortec engine removal - YouTube




Jan 01, 2016 | Cars & Trucks

1 Answer

1987 blazer dies when i turn


I'm assuming the check engine light is not on. You'll have to figure out if it is fuel or ignition to proceed.
Any chance its a wiring problem and something is getting pinched or pulled when you turn ?

Feb 13, 2014 | 1987 Chevrolet Blazer

1 Answer

Engine Install


try on line internet look for diagram for a 1983 chevy blazer 350 engine.or go buy dealership see if they have engine diagram.

Jul 10, 2013 | 1983 Chevrolet Blazer

1 Answer

Will a 1997 jimmie motor swap out with a 1999 chevy blazer?


will work might have a few sensors with different plugs but shouldnt be to bad

Feb 18, 2013 | 1998 Chevrolet Blazer

1 Answer

How to fix rear wiper motor 1999 chevy blazer


see if you can find a gear box for it save yourself hassle and time and money buy new or rebuilt

Jun 08, 2012 | 1999 Chevrolet Blazer

1 Answer

1999 chevy blazer rebuilt transmission wont shift properly


First change the fluid and filter while you have the transmission pan off take the shift solenoids out one at a time and look for graphite build up in or around the solenoid.

Aug 10, 2011 | 1999 Chevrolet Blazer

1 Answer

1999 Chevy Blazer dies after it reaches operating temp. fuel pump is still running but no fuel to motor?


the only thing You can do is take a test light and check the grey wire at the fuel pump to see if you have power while someone cranks the engine. If so replace the fuel pump. If not replace the fuel pump relay. Hope this helps , leave a comment.

May 28, 2010 | 1999 Chevrolet Blazer

1 Answer

Driver side power window won't go up on 99 chevy blazer


bad switch or motor
To check the motor the motor has two connections. One for up and one for down. Try hot wiring the connections to check. If it works the drivers switch is bad

Apr 30, 2010 | 1999 Chevrolet Blazer

3 Answers

1991 Chevy S10 Blazer 4.3 4x4


4170636.jpgThis is all I've got.Hope this helps?

Dec 20, 2009 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...