Abs lamp; brake both on????

You hae a problem whit the unit abs ,The only solution replace the module good luck

Done.

How can nothing be wrong?

You have a possible System Malfunction
that is why the MIL Lamp is on!!

replace the relay for the interior lamps

Hope this helps.



Item Part Number Description 1 — Instrument cluster 2 — Odometer reset shaft 3 — Air bag warning indicator 4 — RH turn signal indicator 5 — Charging system warning indicator 6 — Tachometer 7 — Low oil pressure warning indicator 8 — Brake system warning indicator 9 — Cruise control indicator 10 — Check fuel cap indicator 11 — Anti-lock brake system (ABS) warning indicator 12 — Check transmission indicator 13 — Odometer 14 — Transmission range selector indicator 15 — Trip odometer 16 — Theft indicator 17 — Low coolant indicator (if equipped) 18 — Safety belt warning indicator 19 — Low fuel warning indicator 20 — Fuel gauge 21 — Malfunction indicator lamp (MIL) 22 — Door ajar warning indicator 23 — Traction control indicator (if equipped) 24 — Engine coolant temperature gauge 25 — High beam indicator 26 — LH turn signal indicator 27 — Speedometer

Your front ABS sensors are bad.

I HAVE SEEN A BAD BRAKE LIGHT SWITCH.CAUSE THE ABS LIGHT AND BRAKE LIGHT COME ON.WHEN SWITCH WAS REPLACE BOTH LIGHTS WENT OFF.

Do you mean the van is actually braking like a Starsky and Hutch move or that the warning lights indicate that they are on? If its lights then you may be low on brake fluid. Maybe a module leak

Try cleaning your ABS senors. They are located on the back side of your brake roters. The each senor reads how fast each tire is turning and if there is a big difference between the four your ABS will kick on.

You need to have your brakes inspected by a professional. The lights indicate that ABS and traction control are not working...although brakes will work without these features, a humming noise can indicate more problems to come.