Question about Toyota Cars & Trucks

1 Answer

Tundra 2007 - turn off "maintenance required" light

Tundra 2007 - how to turn off maintenance required light. I was told this came on remain the owner to change the oil. I changed the oil and filter. I now what like to turn off this reminder

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

Oil Change Reminder Lamp: Service and Repair
Engine Oil Replacement Reminder Light
This light acts as a reminder to replace the engine oil.
This light will come on when the ignition key is turned to "ON" and will go off after about a few seconds.
When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about
12 seconds with the ignition key turned to the "ON" position. If you continue driving without replacing the engine oil, and if the distance driven
exceeds 8000 km(5000 miles), the light will come on. The light will remain on thereafter.
If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light
comes on, replace it as soon as possible.
Resetting the system
The system must be reset after the engine oil replacement. Reset the system by the following procedure:
1. Turn the ignition key to the "OFF" position with the odometer reading shown.
2. Turn the ignition key to the "ON" position while holding down the "TRIP METER" reset button.
Hold down the knob for atleast 5 seconds. The odometer indicates "000000" and the light goes off.
If the system fails to reset, the light will continue flashing.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm having a four-wheel-drive problem on my 2002 tundra. I just bought a new 4wd actuator and I still have the same problem


Thread: 4 Wheel Drive just broke - Tundra Solutions

www.tundrasolutions.com/...driveshaft.../1419-4-wheel-drive-just-broke/
Feb 16, 2002 - 15 posts - ‎5 authors Some 2000 model year Tundra owners have reported problems with .... I have a 2002TRD and I cannot get it into 4WD when the temperture ... DIY 2002 Sequoia No 4WD, Blinking Orange Light ...
15 posts
Jan 21, 2010
Question 2004 Sequoia Blinking amber light no 4wd
12 posts
Dec 10, 2009
2004 tundra 4WD not engaging
15 posts
Sep 9, 2007
Tundra 4 Wheel Drive Won't Engage. Help!
11 posts
Nov 27, 2004
More results from www.tundrasolutions.com

Any Tundra owners had the blinking orange light 4WD problem


Sep 30, 2015 | Cars & Trucks

1 Answer

2007 toyota tundra 5.7L vsc off light blinking plus traction control light on and check engine light


Seeing as how you go to a dealer vs: a repair
shop,take it back to the dealer

What else can you do?

You can not resolve yourself without factory service
& diagnostic manuals,you could purchase them

Sep 18, 2012 | 2007 Toyota Tundra SR5

1 Answer

VCS light is on ABS light is on and 4 hi light is flashinh on my 2007 toyota tundra


Hi. This means that your brakes need to be looked at by a mechanic.(maintenance is required)

Jun 30, 2011 | 2007 Toyota Tundra

2 Answers

What does the maintenance required light mean


It's a service reminder light the you're do for maintenance. Check owners manual - compare your cars' miles vs maintenance required. Light needs to be reset after service is performed.

Mar 07, 2011 | 2007 Toyota Camry

1 Answer

2007 TOYOTA TUNDRA MAINTENANCE REQUIRED LIGHT FIX


If it is the same as 2006 model
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!

Aug 26, 2010 | 2007 Toyota Tundra

1 Answer

2007 Tundra: Which fuse if for the dash board that controls all...


hello please help I got a tundra 2007 w/ no hazard turn signal & running lights (front yellow lights) HELP PLEASE all fuses check ok.

May 17, 2010 | 2007 Toyota Tundra

1 Answer

How do you reset the maintenance required light


go to RELIABLE garage ...talk and ask questions of your mechanic, and even ask for old parts to see the damage or wear.

Apr 23, 2010 | 2007 Toyota Tundra

1 Answer

How do i turn off the maintenence required warning light


With a computer scan tool, they're about $125 at your local parts store.

Oct 31, 2009 | 2007 Toyota Tundra

2 Answers

Maintance light


To reset your maintenance reminder system (even if the light hasn’t come on yet), you’ll need to turn your key to on (but don’t start!) and make sure your odometer is on TRIP A. Then key off. Press and hold the Odometer/Trip button. While holding down on the button, key the ignition to on (Don’t start the engine!) The display panel will count down from “------“ to “-“Continue pressing the button until the Trip A is displayed.

Mar 28, 2009 | 2007 Toyota Tundra

2 Answers

Maintenance Required Light


The instruction is in your owners manual. I also perform my own maintenance. Well, here's the steps if you still haven't done it. Good Luck

Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash.

Dec 30, 2008 | 2006 Toyota Tundra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

821 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...