Question about 1987 Plymouth Reliant

Open Question

I need timing specs for an 87 reliant k - 1987 Plymouth Reliant

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

87 Plymouth reliant trouble codes 12 22 24 26 52? Came to the conclusion it is the computer causing all these problems how do I get the computer programed to this car?


If you could find a salvage yard car with same year/engine/trans you might just swap ECU. These units seldom fail, but it does happen. First insure ECU is properly mounted and grounded--same for engine.

Sep 23, 2015 | 1987 Plymouth Reliant

1 Answer

What cause a sluggish acceleration on the 87 fiero


poor fuel pressure and or volume, poor fuel quality, ignition timing is off, bad throttle position sensor(TPS), dirty air filter, fuel injector/s dirty or plugged or not functioning properly, bad manifold air pressure sensor(MAP). just some things that can cause your problem. I would suggest taking your car to a shop to have it diagnosed unless you have the testing equipment and specs to know what is within specs.

Sep 25, 2014 | 1987 Pontiac Fiero

1 Answer

Why does my 87 reliant stalls when it gets hot.


Yes, the pick-up coil was a common cause of what you describe.
Drive along and suddenly die, but by the time help arrived it would re-start, and run for a while again, then quit again until it cooled down.

Sep 13, 2014 | 1987 Plymouth Reliant

1 Answer

Why does my 87 reliant stall when it gets hot?


Sounds like vapor lock. This means that fuel is being boiled before it reaches the engine. Check for loose insulation, gas line exposed to exhaust pipe, etc. basically your gas has to remain cool before it gets used by the engine.

Sep 13, 2014 | 1987 Plymouth Reliant

1 Answer

Correct timing for a 1983 plymouth reliant


7 degrees before top dead center if you got the mitsubishi 2.6 and either 10 or 12 btdc on the 2.2 double check you vehicle manual to be exact

May 05, 2010 | 1983 Plymouth Reliant

1 Answer

What is the order of the sparks plugs in reliant 87 LE?


firing order is 1-3-4-2. cylinders are 1-2-3-4 starting from left as you are standing in front of the vehicle.

Dec 26, 2009 | 1987 Plymouth Reliant

1 Answer

I git an 87 plym reliant and it will start but will not stay runn


I would suspect the pickup in the distributor. It is a common problem, and a fairly cheap and easy try. It is located under the rotor button, and should be about $15-20.

Aug 09, 2009 | 1987 Plymouth Reliant

3 Answers

Ignition timing specs for a 1986 Chevy 454?


Automatic I presume. 8 degrees BTDC @ warm & 700 RPM.
distributor vacuum off & plugged. In drive, & accessories off.
Don't forget parking brake on.

Jul 16, 2009 | 1986 Chevrolet Chevy

1 Answer

CORRECT IGNITION TIMING PROCEDURE


I don't know who posted that but yes you need to use a timing light. Unplug the coolant temp sensor and set the timing to what the underhood sticker says with a timing light.

May 26, 2009 | 1986 Plymouth Reliant 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...