Question about 1993 Chevrolet Lumina

1 Answer

'93 lumina euro,need to replace ignition switch in the column,broke the key off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

If equipped with air bag. have a qualified shop or dealer perform this job.

Posted on Mar 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2003 ford explorer &;lost key an broke ignition'now can a used sterring column start my truck?do i need to replace computer too?


you can replace the ignition switch with out replacing the computer! the switch will be cheaper than a used steering column!

Feb 24, 2015 | 2003 Ford Explorer

1 Answer

How do i replace the ignition switch/lock my daughter broke key off inside of the ignition


We have recently uploaded pages with a description andphotos of how to replace the lock cylinder on GM vehicles (for a small fee). They are broken down into step by stepdetailed instructions. Here is a link to that page. This covers most of the locks from 1995 topresent.http://www.steeringcolumnservices.com/steering-column-repair-how-to-instructions/gm-buick-cadillac-chevrolet-oldsmobile-pontiac/lcg06-ignition-in-column-lock-cylinder-removal.phpLastly, I would have a new lock cylinder in hand before youbegin, to see what you are working on (hidden in the column) and accomplishfinishing this job quickly.Good luckDoughttp://www.steeringcolumnservices.com

Jun 13, 2012 | 1992 Chevrolet Lumina

1 Answer

My 1992 lumina euro was traveling on the highway and suddenly stopped running. After checking many things, i found the timing chain had broke & teeth were sheared off gear. I replaced the gear &...


first do a compression test on the engine,, you may have bent the engine valves check the engine ignishion timing if its only just a little bit out like one tooth it wont run, ,,and fix that key switch too?

Dec 02, 2010 | 1992 Chevrolet Lumina

1 Answer

How do I change the ignition switch in my 93 plymouth van?


FIRST OF ALL, TURN OFF RADIO,DISCONNECT NEGATIVE BATTERY CABLE. IF EQUIPPED WITH TILT STEERING COLUMN,REMOVE TILT LEVER.CAREFULLY REMOVE THE UPPER AND LOWER STEERING COLUMN COVERS. REMOVE THE 3 TAMPER PROOF TORX IGNITION SWITCH MOUNTING SCREWS USING SNAP ON TOOL TTXR15A2 OR EQUIVALENT. GENTLY PULL THE SWITCH AWAY FROM THE COLUMN AND REMOVE THE 2 ELECTRICAL CONNECTORS FROM THE IGNITION SWITCH. WITH THE KEY IN THE LOCK POSITION, DEPRESS THE KEY CYLINDER RETAINING PIN FLUSH WITH THE KEY CYLINDER SURFACE. ROTATE THE KEY CLOCKWISE TO THE OFF POSITION THE KEY CYLINDER SHOULD NOW BE UNSEATED. ROTATE THE KEY CYLINDER COUNTER CLOCKWISE BACK TO THE LOCK POSITION, AND REMOVE THE LOCK CYLINDER. ( TO INSTALL ) CONNECT THE ELECTRICAL CONNECTORS TO THE IGNITION SWITCH. BE SURE THE CONNECTORS ARE SECURELY LOCKED IN PLACE. MOUNT THE IGNITION SWITCH TO THE COLUMN 3 SCREWS FOR VECHICLES WITH THE TILT STEERING COLUMN THE SHIFTER MUST BE IN THE PARK POSITION AND THE PARK LOCK DOWEL PIN AND THE COLUMN LOCK FLAG MUST BE INDEXED BEFORE THE SWITCH IS INSTALLED. PLACE SHIFTER IN THE PARK POSITION. PLACE THE IGNITION SWITCH IN THE LOCK POSITION. THE SWITCH IS IN THE LOCK POSITION WHEN THE STEERING COLUMN LOCK FLAG IS PARALLEL TO THE IGNITION SWITCH TERMINALS. POSITION THE PARK LOCK DOWEL PIN OF THE IGNITION SWITCH SO IT ENGAGES THE STEERING COLUMN PARK LOCK SLIDER LINKAGE. APPLY A LIGHT COATING OF GREASE TO THE PARK LOCK DOWEL PIN AND THE COLUMN LOCK FLAG. POSITION THE IGNITION SWITCH AGAINST THE LOCK HOUSING OPENING ON THE STEERING COLUMN. BE SURE THE SWITCH PARK LOCK DOWEL PIN ENTERS THE SLOT IN THE PARK LOCK SLIDER LINKAGE INSTALL THE RETAINING SCREW AND BRACKET. TORQUE THE SCREW TO 26 INCH LBS. INSTALL THE STEERING COLUMN COVERS AND THE TILT LEVER IF REMOVED. WITH THE KEY CYLINDER AND THE IGNITION IN THE LOCK POSITION INSTALL THE KEY CYLINDER INTO THE SWITCH UNTIL IT BOTTOMS. RECONNECT THE NEGATIVE BATTERY CABLE AND THE CHECK THE IGNITION SWITCH FOR PROPER OPERATION OF HALO LIGHT SHIFT LOCK IF EQUIPPED AND COLUMN LOCK.ALSO CHECK FOR PROPER OPERATION OF THE IGNITION SWITCH ACCESSORY, LOCK OFF, RUN AND START FUNCTIONS.

Sep 18, 2010 | 1993 Plymouth Voyager

1 Answer

Was replacing the ignition switch and accidently broke off a silver piece off of where the switch goes connected. Can you some one tell me if this can be replaced and if I have to replace the entire key...


Replacing An Ignition Switch..

If The Ignition Switch Is Defective, It Must Be Replaced Regardless. Before Removing A Dashboard-mounted Switch, The Tumbler (Lock Mechanism) Must Be Removed From The Switch.Normally A Small Piece Of Wire Is Inserted Into A Hole IN The Front Of The Switch And The Key Is Turned.This Will Release The Tumbler From The Switch So The Tumbler Can Be Pulled Free. Then Unplug The Wires And Remove The Old Switch.

A Steering Column-mounted Ignition Switch Is Separated From The Tumbler. It Is Normally About Halfway Down And On Top Of The Steering Column. To Remove This Type Of Switch, Remove The Fasteners Holding The Steering Column To The Dash. This Will Let The Column Drop Down So You Can Replace The Ignition Switch.

Apr 09, 2010 | 1999 Dodge Caravan

1 Answer

Turn signal doesn't blink just lights up


You should check the bulbs first. Front and rear, park,brake and turn signals. I think you will find there is either a bad bulb or possibly a faulty socket. If those are fine it may be a flasher problem. You can find the flasher by turning the signal switch to the side that works with the key on and find the clicking flasher. Good luck!!!

May 27, 2009 | 1993 Chevrolet Lumina

1 Answer

Replaced ignition switch


you have to align it with the key out then adjust the switch on steering column

Dec 19, 2008 | 1991 Ford F150

1 Answer

Security light flashing, does not turn over, do i replace ignition or ecm or both? Do i need new key if i replace ignition?


Chances are the wire going to ignition broke allowing the security to start flashing.this will keep the
car from cranking.On my 93 bonneville I went to Radioshack and got a 680 ohm resister,cut the 2 small
yellow wires on lower steering column under dash,soldered resister to the 2 yellow wires coming from harness.Cost of repair..$1. you can read the resistance on the key by using ohm meter on each
side of chip in key

Jul 30, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
1993 Chevrolet Lumina Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...